ideanote
inCAD Library

Make sure to read this before use

What is inCAD Library?

  • Helpful application examples for mechanical engineers.

The Concept of inCAD Library

  • Online application library with a range of ideas for all manufacturing industries.
  • Save design time and learn new design applications when you are concepting new machines.

Disclaimer

  • MISUMI may not offer all parts in each application design. Available parts can only be purchased separately not as a unit shown in each application design.
  • MISUMI does not guarantee quality, accuracy, functionality, safety or reliability for the combination of the parts in each application example. Accept these points prior to use.
  • 2014 Copyright MISUMI
  • The data cannot be used for any purposes (including sales promotion) except for designing your machine.
  • All associated CAD is free. MISUMI reserves the right at its sole discretion to cancel, terminate or modify this offer.
  • MISUMI may change, add or delete application examples posted without prior notice.
  • MISUMI assumes no responsibilities for any damage incurred resulting from your use of the Service or any change, addition or deletion by MISUMI of the application examples for any reason whatsoever.

Features of inCAD Library

  1. Get great new design ideas for these application examples.
  2. Over 200 design application ideas collected from dozens of industries!

  3. Find application examples quickly! Search by function, workpiece shape, etc.

  4. Download the CAD models for each application example.
  5. Log in to download free CAD models.
    Download CAD for the entire application example!

Good IDEA! Button

Click the Good IDEA! Button when you like an application example!

*Can only be clicked once per application example.

  • Upper right corner on the page of application example details

  • Pop-up dialog for CAD data downloading

Back to top

inCAD Library Keyword Search
inCAD Library No. Search

No.000011 Foldable unit X

Clamping mechanism using toggle clamps

Related Category

Toggle Clamp

Product name Horizontal Handle
Part number MC01-2B
Features Toggle clamp in size between MC01-2 and MC01-3.
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Easy to use with one-touch open/close action.

Back to page top

Available sizes

■Toggle Clamps -Horizontal Handle-

Body material EN 1.0038 Equiv. EN 1.4301 Equiv.
Surface treatment Trivalent Chromate -
Clamping force (N) 264.6 264.6 400 882 2352 264.6 264.6 882 2352
Weight (g) 30 35 60 130 265 30 35 130 265
Arm open-close angle 90° 90° 90° 85° 90° 90° 90° 85° 90°
Handle open / close angle 75° 75° 75° 73° 65° 75° 75° 73° 65°
Overall width 23.8 23.8 23.8 36 35 23.8 23.8 36 35
Overall height (Clampled) 17.3 17.3 34.6 37.8 47.6 17.3 17.3 37.8 47.6
Overall height (Unclamped) 48.3 48.3 78 96.8 110.2 48.3 48.3 96.8 110.2
Overall length (Clamped) 71 69.1 100.6 143.5 173 71 69.1 143.5 173
Clamp position Fixed Variable Variable Variable Variable Fixed Variable Variable Variable
Accessory Nylon Bolt Bolt with rubber
Material: NBR
Hardness: Shore A70
Stainless steel bolt

* Please see the product pages for shape details and dimensions.

Back to page top

Stopper Bolt with Urethane

Product name Stopper Bolts with Bumpers/Straight Type
Part number USUS6-25
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Urethane tips are used to prevent workpiece damage

Back to page top

Available sizes

■Stopper Bolts With Bumpers- Straight Type

Stopper Bolt
Material Hardness Material Strength classification Surface treatment
Urethane
(Black)
Shore A90 EN 1.7220 Equiv. 10.9 Trivalent Chromate
EN 1.4301 Equiv. - -
Polyacetal (White) - EN 1.7220 Equiv. 10.9 Trivalent Chromate
EN 1.4301 Equiv. - -

■Sizes and Dimensions

Screw DIA. (Coarse) Threaded section length (Length under head) Stopper
10 15 20 25 30 35 40 45 50 60 70 O.D. Height
M4 Ø3.1 4.5
M5 Ø4
M6 Ø4.8
M8 Ø6.5 5.5
M10 Ø8.3
M12 Ø10 6

Back to page top

Hex Support Pin

Product name Support Pins/Pilot Shape Selectable/Stepped Pilot
Part number SRPAC8-L15.00-P3.00-F2.0
Features This can be used for horizontal / vertical positioning on high locations.
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Good height accuracy, and pin configuration makes suitable for workpiece guide.

Back to page top

Available sizes

■Support Pins- Pilot Shape Selectable, Stepped Pilot

Material Surface treatment Hardness
EN 1.1191 Equiv. Black oxide -
Hard chrome plating Hardness 750HV ~
Chrome thickness 3µm or more
Black oxide Heat treated hardness 45 ~ 50HRC
Hard chrome plating Heat treated hardness 45 ~ 50HRC
Chrome thickness 3µm or more Hardness 750HV ~
EN 1.4125 Equiv. - Heat treated hardness 50 ~ 55HRC

■Sizes and Dimensions

Hex size Hex shaft length Pin diameter Pin length (Pin section height) Screw hole
Straight section Tapered section Screw diameter Depth
Specify in 0.01mm increments Specify in 0.01mm increments Specify in 0.1mm increments (Coarse)
6 10.00 ~ 50.00 Ø3.00 ~ Ø4.00 2.0 ~ 12.0 1 M3 6
7 Ø3.00 ~ Ø6.00 2.0 ~ 15.0
8 15.00 ~ 50.00 M4 8
10 20.00 ~ 80.00 Ø4.00 ~ Ø8.00 2.0 ~ 20.0 2 M5 10
12 Ø4.00 ~ Ø10.00
13 Ø5.00 ~ Ø10.00 2.0 ~ 25.0 3 M6 12
14
17 Ø8.00 ~ Ø15.00 2.0 ~ 30.0
19 M8 16
24 Ø10.00 ~ Ø15.00 4

* Manufactuable sizes are limited by the material. Please see the product pages for details.

Back to page top

Accuracy Info

■Accuracy of Stepped and Tapped Hex Support Pins

  • Pin diameter tolerance: 0 / -0.01
  • Hex shaft length tolerance: +0.05 / 0

Back to page top

IDEA NOTE Two toggle clamps hold down at four points

Two stopper bolts are provided on each toggle clamp, enabling supporting at four points.

IDEA NOTE Stopper bolts are used.

The workpiece is protected from scratches or damage by resin tipped clamp tips.

  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Data Download (Unit Assembly)

    CAD Data Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when this application example is helpful.


    This data is utilized in order to list more useful application examples in the future.

    Cautions on the CAD data

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. The CAD data unit assembly consists of sub-assemblies.
      Each sub-assembly unit can be used as it is or can be edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Back to top

  • * Unit assembly CAD data consists of some sub-assemblies.
       Each sub-assembly unit can be used as it is or can be edited.

Application Overview

Purpose

  • Workpiece holding is ensured by 4 point clamping near locating features.

Points for use

  • Manually operated toggle clamps.
  • Urethane rubber tipped stopper bolts are used to prevent damage to the workpiece.

Target workpiece

  • Substate
    External dimensions W130 x D110 x t1.6

Design Specifications

Operating Conditions or Design Requirements

  • Toggle clamp arm open/close: Angle: 90°
  • External dimensions: W300 x D150 x H54

Selection Criteria for Main Components

  • Toggle clamp
    • Clamp is hold down type with a horizontal handle since the clamping is vertical to restrain the workpiece.
    • Wide opening clamps are used to ease workpiece loading and unloading.
    • The clamps apply a light force on the workpiece during operation so standard handles are used.
  • Stopper bolts with urethane bumpers
    • Resin type is selected to prevent workpiece damage.

Design Evaluation

Other Design Consideration

  • A dual point contact arm is mounted on the toggle clamp to better utilize one clamp.
  • The brackets included with the toggle clamps are used to mount the dual contact arm.
  • Stopper bolts with urethane bumpers are used to prevent workpiece danage.
  • Stopper bolts are adjusted to not apply excessive loads on the workpiece.

Explore Similar Application Examples

Page - / -

Part List

No. Part Name Sample picture MISUMI Part Number
For Price and Days to ship click on Part No.
Quantity
1 Toggle Clamps MC01-2B 2
2 Stopper Bolts USUS6-25 4
3 Locating Pins SRPAC8-L15.00-P3.00-F2.0 4
4 Collars KNCLSS4-6-10 8
  • The part list above contains only MISUMI parts.
    The list of parts and machined products of other manufacturers than MISUMI can also be downloaded by part list download (CSV).
  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Data Download (Unit Assembly)

    CAD Data Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when this application example is helpful.


    This data is utilized in order to list more useful application examples in the future.

    Cautions on the CAD data

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. The CAD data unit assembly consists of sub-assemblies.
      Each sub-assembly unit can be used as it is or can be edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Back to top

Back to top