ideanote
inCAD Library

Make sure to read this before use

What is inCAD Library?

  • Helpful application examples for mechanical engineers.

The Concept of inCAD Library

  • Online application library with a range of ideas for all manufacturing industries.
  • Save design time and learn new design applications when you are concepting new machines.

Disclaimer

  • MISUMI may not offer all parts in each application design. Available parts can only be purchased separately not as a unit shown in each application design.
  • MISUMI does not guarantee quality, accuracy, functionality, safety or reliability for the combination of the parts in each application example. Accept these points prior to use.
  • 2014 Copyright MISUMI
  • The data cannot be used for any purposes (including sales promotion) except for designing your machine.
  • All associated CAD is free. MISUMI reserves the right at its sole discretion to cancel, terminate or modify this offer.
  • MISUMI may change, add or delete application examples posted without prior notice.
  • MISUMI assumes no responsibilities for any damage incurred resulting from your use of the Service or any change, addition or deletion by MISUMI of the application examples for any reason whatsoever.

Features of inCAD Library

  1. Get great new design ideas for these application examples.
  2. Over 200 design application ideas collected from dozens of industries!

  3. Find application examples quickly! Search by function, workpiece shape, etc.

  4. Download the CAD models for each application example.
  5. Log in to download free CAD models.
    Download CAD for the entire application example!

Good IDEA! Button

Click the Good IDEA! Button when you like an application example!

*Can only be clicked once per application example.

  • Upper right corner on the page of application example details

  • Pop-up dialog for CAD data downloading

Back to top

inCAD Library Keyword Search
inCAD Library No. Search

No.000183 Detachable turntable

Changeover workbench easy to detach (the figure shows the one looked up from below)

Related Category

Silicon Rubber Mold Bearings

Product name Silicon Rubber Mold Bearings/Crown/with Threaded Shaft
Part number UMSWRT5-16
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Suitable rotating object part without scratching the rotating surface

Back to page top

Available sizes

■Urethane molded bearings, threaded R type, long threaded, shape A

Tire Section Bearing Shaft
Material Hardness Color Material Surface Treatment
Urethane Shore A90 Black JIS-SUJ (Bearing Steel) Carbon Steel Electroless Nickel Plating
White JIS-SUJ (Bearing Steel) Carbon Steel Trivalent Chromate
EN 1.4125 Equiv. EN 1.4305 Equiv. -
Silicon Rubber Shore A70 Light Gray JIS-SUJ (Bearing Steel) Carbon Steel Electroless Nickel Plating
EN 1.4125 Equiv. EN 1.4305 Equiv. -
Anti-static Urethane Shore A90 Gray JIS-SUJ (Bearing Steel) Carbon Steel Electroless nickel plating

■Sizes and Dimensions

O.D. Bearing Screw Dia.
(Coarse)
Thread
Length
Roller Width Circumference R
Ø12 W683ZZA M3 6 3 5
Ø13 W684AX50ZZ M4 8 4
Ø16 624ZZ 5
WBC5 - 13ZZ
Ø20 625ZZ
696ZZ M6 12
Ø28 626ZZ 6
608ZZ 7

Back to page top

Performance info.

■Allowable load of the urethane molded bearings, threaded R type

O.D. Bearing Allowable Load N
Urethane Silicon
Shore A90 Shore A70 Shore A70
Ø12 W683ZZA 34 10 9.8
Ø13 W684AX50ZZ 44 13 13
Ø16 624ZZ 59 16 18
WBC5 - 13ZZ 16
Ø20 625ZZ 78 20 24
696ZZ 23
Ø28 626ZZ 157 44 47
608ZZ 176 42

Back to page top

Shoulder Bolt

Product name Shoulder Bolts/Tolerance e9/EN 1.7220 Equiv.
Part number SMSB6.5-15
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Suitable shaft parts to support rotary motion

Back to page top

Available sizes

■Shoulder bolts - Shaft Dia. Tolerance e9

Material Hardness Strength Class
EN 1.7220 Equiv. 33 ~ 38HRC 10.9
EN 1.4301 Equiv. - A2 - 50

■Sizes and Dimensions

Material Under head
DIA.
Shaft length under head Head Thread
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 120 130 140 150 O.D. Height Thread Dia.
x
Pitch
Length
EN 1.7220 Equiv. Ø4 Ø6.5 3 M2.5 x 0.45 5
Ø4.5 Ø7 M3 x 0.5 6
Ø5 Ø8 3.5
Ø5.5 Ø9 4 M4 x 0.7 7
Ø6
Ø6.5 Ø10 5 M5 x 0.8 9
Ø8 Ø13 6 M6 x 1.0
Ø10 Ø16 8 M8 x 1.25 12
Ø12 Ø17
Ø13 Ø18 10 M10 x 1.5 16
Ø16 Ø24 14 M12 x 1.75 18
Ø20 Ø27 18 M16 x 2.0 24
EN 1.4301 Equiv. Ø4 Ø6.5 3 M2.5 x 0.45 5
Ø4.5 Ø7 M3 x 0.5 6
Ø5 Ø8 3.5
Ø5.5 Ø9 4 M4 x 0.7 7
Ø6
Ø6.5 Ø10 5 M5 x 0.8 9
Ø8 Ø13 6 M6 x 1.0
Ø10 Ø16 8 M8 x 1.25 12

Back to page top

Accuracy Info

■Accuracy of shoulder bolts -Shaft dia. Tolerance e9

Shaft Dia.
Tolerance of O.D. Dimension
Ø4 -0.020 / -0.050
Ø4.5
Ø5
Ø5.5
Ø6
Ø6.5 -0.025 / -0.061
Ø8
Ø10
Ø12 -0.032 / -0.075
Ø13
Ø16
Ø20 -0.040 / -0.92

Shaft length tolerance: ±0.1mm

Back to page top

L Sheet Metal

Product name L Sheet Metal Mounting Plates/Brackets
Part number FALBS-SUD-T2.0-A22-B20-L20-X10-H16-N4-Y5-V10-S12-NA4
* Orange colored cells in the table below indicate the part numbers used in this example.

Selection criteria

Suitable caster parts

Back to page top

Available sizes

■L Sheet Metal Brackets (Dimension Configurable Type, 1 Hole x 2 Holes)

Material Surface Treatment Plate Thickness
Low Carbon Steel - 1.6, 2.3, 3.2
Black Oxide
Trivalent Chromate (Clear)
Trivalent Chromate (Black)
Hot Rolled Steel - 4.5, 6.0
Black Oxide
Trivalent Chromate (Clear)
Trivalent Chromate (Black)
EN AW-5052 Equiv. - 1.5, 2.0, 3.0, 4.0, 5.0
Anodize (Clear)
Anodize (Black)
EN 1.4301 Equiv. (2B) - 1.0, 1.5, 2.0, 3.0, 4.0, 5.0

■External Dimensions

Plate Thickness Hole Dia. [A] Overall height [B] Depth [L] Overall width
(1mm increments)
1.0 ~ 5.0 Ø3, 4, 5, 6, 8, 10 22 ~ 200 22 ~ 200 26 ~ 200
6.0 22 ~ 300

* Hole positions configurable. Please see the product pages for details.

Back to page top

IDEA NOTE Facilitating detaching of the turntable

The bolt for the fixing of the turntable is the one at the center. The bolt cannot be removed from the turntable in order to prevent a possible loss.

IDEA NOTE Preventing deflection of the turntable

Urethane molded bearings are positioned on three spots on the bottom surface of the turntable in order to support the prevention of deflection.

  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Data Download (Unit Assembly)

    CAD Data Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when this application example is helpful.


    This data is utilized in order to list more useful application examples in the future.

    Cautions on the CAD data

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. The CAD data unit assembly consists of sub-assemblies.
      Each sub-assembly unit can be used as it is or can be edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Back to top

  • * Unit assembly CAD data consists of some sub-assemblies.
       Each sub-assembly unit can be used as it is or can be edited.

Application Overview

Purpose

  • Purpose
    • Facilitating detaching of the turntable used in the product inspection/repair process.
  • Operation
    • Product inspection and product repair are conducted on a workbench. A turntable is not always necessary.
      In case the turntable is not necessary, you can remove it by loosening the bolt at the center of the turntable. In the opposite case, the mounting position is repeated by the two positioning pins and holes on the workbench. You can fix the turntable by tightening the bolt at the center of the turntable.

Points for use

  • The turntable is rotated manually.

Target workpiece

  • Shape: Block
  • Size: W430 x D250 x H70mm
  • Weight: 6kg

Design Specifications

Operating Conditions or Design Requirements

  • Turntable O.D.: Ø350mm
  • External size (workbench) : W700 x D600 x H170mm

Selection Criteria for Main Components

  • Select the R type for urethane molded bearings for supporting the prevention of deflection of the turntable.

Design Evaluation

Verification of main components

  • Verify bearing durability for the load weight.
  • Calculate life span of the bearing
    • Conditional values: Bearing: Basic dynamic load rating of B6906ZZ: Cr = 7.25kN = 7250N 
      Workpiece weight: M = 6kg 
      Gravitational acceleration: g = 9.8m/s²
      Accidental manual force: Assume to be Q = 200N
    • Gravity by the workpiece: W = M x g = 6 x 9.8 = 59N
    • Let radial dynamic equivalent load be Pr, radial load Fr, thrust load Fa, radial factor X = 1, and thrust factor Y = 2.3 , then,
    • Pr = X x Fr + Y x Fa Assume that force acting on the bearing, Po = M + Q, acts only in the z-axis direction (thrust load), and let radial load Fr = 0N, then we obtain the following:
    • Thrust load: Fa = Po = M + Q = 259N, Pr = 1 x Fr + 2.3 x (M + Q) = 1 x 0 + 2.3 x 259 = 596N,
    • Rated life (10⁶ rotations): L = (Cr / Pr)³ = (7250 / 596)³ = 1800 (10⁶ rotations) Thus, there exists sufficient margin.

Other Design Consideration

  • Securing repeatability of the turntable position and fixing the turntable with one bolt.
  • Two round bores are configured for workbench positioning, and diamond-shaped positioning pins are effectively used.

Part List

No. Part Name Sample picture MISUMI Part Number
For Price and Days to ship click on Part No.
Quantity
1 Ball Bearing UMSWRT5-16 3
2 Ball Bearing B6906ZZ 1
3 Retaining Rings STWS30 1
4 Retaining Rings RTWN47 1
5 Locating Pins GJPBB4-6 1
6 Locating Pins GJPDB4-6 1
7 Shoulder Bolts SMSB6.5-15 1
8 Sheet Metal Bracket FALBS-SUD-T2.0-A22-B20-L20-X10-H16-N4-Y5-V10-S12-NA4 3
  • The part list above contains only MISUMI parts.
    The list of parts and machined products of other manufacturers than MISUMI can also be downloaded by part list download (CSV).
  • TERMS AND CONDITIONS FOR USE OF CAD DATA
    Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
    1. CAD Data
    The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
    2. Disclaimer on Data
    While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
    3. Copyright
    Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
    4. Disclaimer of Warranty
    ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
    Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances).
    5. Policy of Third Parties
    You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.

    CAD Data Download (Unit Assembly)

    CAD Data Download: File Format
    生成

    Thank you for downloading the data.

    Click the Good IDEA! button when this application example is helpful.


    This data is utilized in order to list more useful application examples in the future.

    Cautions on the CAD data

    1. Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
      You will need to edit the Data so that it meets your specific design conditions.
    2. The CAD data unit assembly consists of sub-assemblies.
      Each sub-assembly unit can be used as it is or can be edited.
    3. * The part in the frame is a sub-assembly unit.

    4. The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
    5. The Data including the third-part components are made by the Company.

    Back to top

Back to top