Ejector sleeves / steel / nitrided / length configurable / concentricity 0.06 / JIS standard
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| ESJL4-[80-200/0.01]-V[1.5-2.5/0.5] |
| ESJL4.5-[80-200/0.01]-V[1.5,2,2.5] |
| ESJL5-[80-300/0.01]-V3 |
| ESJL5-[80-300/0.01]-V[2-3/0.5] |
| ESJL5.5-[80-300/0.01]-V3 |
| ESJL5.5-[80-300/0.01]-V[2-3/0.5] |
| ESJL6-[80-450/0.01]-V[2-4/0.5] |
| ESJL6.5-[80-450/0.01]-V[2-4/0.5] |
| ESJL7-[80-450/0.01]-V[2-4.5/0.5] |
| ESJL7.5-[80-375/0.01]-V3 |
| ESJL7.5-[80-375/0.01]-V[3.5-4.5/0.5] |
| Part Number | Minimum order quantity | Volume Discount | RoHS | Head thickness | Shaft diameter tolerance | D/P (Shaft diameter) (mm) | V (Hole diameter) (mm) | L (L dimension) (mm) | |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 4 | 1.5 ～ 2.5 | 80 ～ 200 | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 4.5 | 1.5 ～ 2.5 | 80 ～ 200 | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 5 | 3 | 80 ～ 300 | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 5 | 2 ～ 3 | 80 ～ 300 | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 5.5 | 3 | 80 ～ 300 | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 5.5 | 2 ～ 3 | 80 ～ 300 | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 6 | 2 ～ 4 | 80 ～ 450 | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 6.5 | 2 ～ 4 | 80 ～ 450 | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 7 | 2 ～ 4.5 | 80 ～ 450 | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 7.5 | 3 | 80 ～ 375 | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 7.5 | 3.5 ～ 4.5 | 80 ～ 375 |
Loading...
Basic information
| Product composition | Single sleeve | Material | SKD61 | Surface treatment | Nitrided |
|---|---|---|---|---|---|
| Concentricity between the hole and shaft diameters | ◎0.06 | Boring method | Reaming | Inner dia. tolerance | H7 |
| Tapered or not | No | Center pin tip shape | No | Technical Standard | JIS |
Configure
Basic Attributes
-
Shaft diameter tolerance
- -0.01/-0.02
- -0.01/-0.03
-
D/P (Shaft diameter)(mm)
-
V (Hole diameter)(mm)
-
L (L dimension)(mm)
-
Type
- ESJL
-
Head thickness
- 6mm(JIS)
- 8mm(JIS)
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.