Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
LMUT8L
Type | Outer Cylinder | Balls | Retainer | Ambient Operating Temp. | Accessory | ||
Short | Material | Hardness | Surface Treatment | Material | Material | ||
LMUT | EN 1.3505 Equiv. | 58HRC~ | - | EN 1.3505 Equiv. | Plastic (Duracon M90 Equiv.) | -20~80°C | SealMaterial: Nitrile Rubber (-20~120°C) |
SLMUT | EN 1.4125 Equiv. | 56HRC~ | EN 1.4125 Equiv. |
Part Number | |
LMUT8 LMUD10 LMUDM12L | (L Type Greased) |
Part Number | D | L | R | f | (r) | Eccentricity (Max.) | Rows of Balls | Basic Load Rating | Mass (g) | |||||
Type | dr | Tolerance | Tolerance | Tolerance | C (Dynamic) N | Co (Static) N | ||||||||
LMUT SLMUT | 6 | 0 -0.009 | 12 | 0 -0.011 | 16 | 0 -0.2 | 1 | 0.3 | 0.4 | 0.012 | 4 | 113 | 155 | 6.6 |
8 | 15 | 20 | 155 | 226 | 14.7 | |||||||||
10 | 19 | 0 -0.013 | 25 | 1.2 | 0.4 | 254 | 359 | 26.1 | ||||||
12 | 21 | 0.8 | 317 | 407 | 28.6 | |||||||||
13 | 23 | 320 | 413 | 36.3 | ||||||||||
16 | 28 | 30 | 1.5 | 0.5 | 582 | 724 | 60.0 | |||||||
20 | 0 -0.010 | 32 | 0 -0.016 | 35 | 0.015 | 5 | 777 | 1034 | 81.6 |
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
LMUT8L |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Diameter of Inscribed Circle dr (φ) | Overall Length L (mm) | Material of Outer Cylinder | Outer Diameter D (φ) | Basic Load Rating Dynamic Rating (Detail) (N) | Basic Load Rating Static Rating (N) | Tolerance of Inscribed Circle (Minus Side) (mm) | Eccentricity (μm) | Ball Material | Greased filled | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
17.20 € | 1 | Available | 9 Days | 10 | 8 | 20 | [Iron] EN 1.3505 Equiv. | 15 | 155 | 226 | -0.009 | 12 | EN 1.3505 Equiv. | Type L (Heat Resistance) |
Loading...
Type | Straight | Style | Standard | Outer Cylinder Surface Treatment | No Surface Treatment |
---|---|---|---|---|---|
Motion | Linear Motion | Lubrication Type | Not Provided | The circulation type of balls | 1-fach |
Accuracy | High Grade | Type | Straight | Length | Short |
Retainer Material | Plastic (POM Equiv.) | Seals | With Seal |
This page is Linear ball bearings / steel / nickel-plated / double bush / single ring groove, part number LMUT8L.
You can find the detail information about specifications and dimensions on part number LMUT8L.
Configure
Basic Attributes
Material of Outer Cylinder
Type
Diameter of Inscribed Circle dr(φ)
Overall Length L(mm)
Outer Diameter D(φ)
Eccentricity(μm)
Ball Material
Greased filled
Filter by CAD data type
Filter by standard shipping days
Optional Attributes
Part Number |
---|
LMUT10L |
LMUT12 |
LMUT12G |
SLMUT10 |
SLMUT10G |
SLMUT10H |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | RoHS | Diameter of Inscribed Circle dr (φ) | Overall Length L (mm) | Material of Outer Cylinder | Outer Diameter D (φ) | Basic Load Rating Dynamic Rating (Detail) (N) | Basic Load Rating Static Rating (N) | Tolerance of Inscribed Circle (Minus Side) (mm) | Eccentricity (μm) | Ball Material | Greased filled |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
17.30 € | 1 | Available | 9 Days | 10 | 10 | 25 | [Iron] EN 1.3505 Equiv. | 19 | 254 | 359 | -0.009 | 12 | EN 1.3505 Equiv. | Type L (Heat Resistance) | |
3.43 € | 1 | Available |
Same day
Stock | 10 | 12 | 25 | [Iron] EN 1.3505 Equiv. | 21 | 317 | 407 | -0.009 | 12 | EN 1.3505 Equiv. | Not Provided | |
24.03 € | 1 | Available | 9 Days | 10 | 12 | 25 | [Iron] EN 1.3505 Equiv. | 21 | 317 | 407 | -0.009 | 12 | EN 1.3505 Equiv. | Type G (Low Particlate) | |
9.90 € | 1 | Available |
Same day
Stock | 10 | 10 | 25 | EN 1.4125 Equiv. | 19 | 254 | 359 | -0.009 | 12 | EN 1.4125 Equiv. | Not Provided | |
23.58 € | 1 | Available | 9 Days | 10 | 10 | 25 | EN 1.4125 Equiv. | 19 | 254 | 359 | -0.009 | 12 | EN 1.4125 Equiv. | Type G (Low Particlate) | |
23.58 € | 1 | Available | 9 Days | 10 | 10 | 25 | EN 1.4125 Equiv. | 19 | 254 | 359 | -0.009 | 12 | EN 1.4125 Equiv. | Type H (For Food and Beverages) |