Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Parts | Material | Surface Treatment | Accessory |
Casing | Aluminum Alloy (Sintered Treatment for CPF32) | Electrodeposited Paint (Black) (Steam Treatment for CPF32) | Set Screw |
Sleeve | Polyurethane (Orange) | - |
Part Number | - | Shaft Bore Dia. d1 | - | Shaft Bore Dia. d2 |
CPF20 | - | 10 | - | 10 |
CPJLW50 | - | 10 | - | 12 |
Part Number | d1, d2 Selection (d1≤d2) | L | B | ℓ | t | F | Sleeve | Set Screw | Unit Price | ||||||||||||
Type | D | C | K | H | M | Tightening Torque (N • m) | |||||||||||||||
CPF | 16 | 3 | 4 | 5 | 6 | 6.35 | 8 | 27 | 12 | 8 | 3 | 4 | 11 | 14 | 6/6 | M3 | 0.7 | ||||
20 | 5 | 6 | 6.35 | 8 | 10 | 34 | 15 | 10 | 4 | 5 | 14 | 18 | 8/8 | ||||||||
25 | 6 | 6.35 | 8 | 10 | 12 | 41 | 18 | 12 | 5 | 6 | 17 | 22 | 10/10 | M4 | 1.7 | ||||||
32 | 8 | 10 | 12 | 14 | 48 | 21 | 14 | 6 | 7 | 20 | 29 | 12/14 |
Part Number | Allowable Torque (N • m) | Angular Misalignment (°) | Lateral Misalignment (mm) | Static Torsional Spring Constant (N • m/rad) | Max. Rotational Speed (r/min) | Moment of Inertia (kg • m2) | Mass (g) | |
Type | D | |||||||
CPF | 16 | 0.5 | 2 | 0.2 | 4.4 | 39000 | 9x10-7 | 22 |
20 | 1 | 9.5 | 31000 | 2.7x10-6 | 42 | |||
25 | 1.5 | 20 | 25000 | 8.1x10-6 | 81 | |||
32 | 3 | 52 | 19000 | 2.5x10-5 | 150 |
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
CPF16-[3,4,5,6,6.35,8]-[3,4,5,6,6.35,8] |
CPF16-[3,4,5,6,6.35,8]-RDC[3-8/0.1] |
CPF16-[3,4,5,6,6.35,8]-* |
CPF16-LDC[3-8/0.1]-[3,4,5,6,6.35,8] |
CPF16-LDC[3-8/0.1]-RDC[3-8/0.1] |
CPF16-LDC[3-8/0.1]-* |
CPF16-*-[3,4,5,6,6.35,8] |
CPF16-*-RDC[3-8/0.1] |
CPF16-*-* |
CPF20-[5,6,6.35,8,10]-[5,6,6.35,8,10] |
CPF20-[5,6,6.35,8,10]-RDC[5-10/0.1] |
CPF20-[5,6,6.35,8,10]-* |
CPF20-LDC[5-10/0.1]-[5,6,6.35,8,10] |
CPF20-LDC[5-10/0.1]-RDC[5-10/0.1] |
CPF20-LDC[5-10/0.1]-* |
CPF20-*-[5,6,6.35,8,10] |
CPF20-*-RDC[5-10/0.1] |
CPF20-*-* |
CPF25-[6,6.35,8,10,12]-[6,6.35,8,10,12] |
CPF25-[6,6.35,8,10,12]-RDC[6-11.9/0.1] |
CPF25-LDC[6-11.9/0.1]-[6,6.35,8,10,12] |
CPF25-LDC[6-11.9/0.1]-RDC[6-11.9/0.1] |
CPF32-[8,10,12,14]-[8,10,12,14] |
CPF32-[8,10,12,14]-RDC[8-14/0.1] |
CPF32-LDC[8-14/0.1]-[8,10,12,14] |
CPF32-LDC[8-14/0.1]-RDC[8-14/0.1] |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Allowable Torque Range (N•m) | Shaft Bore Dia. 1 d1 (or d) (mm) | Shaft Bore Dia. 2 d2 (or d) (mm) | O.D. D (mm) | Overall Length (mm) | Allowable Torque (Nm) | Max. Rotational Speed (r/min) | Moment of Inertia (kg・m2) | Shaft I.D. d1 Change Hole Dia. [LDC] Specified in 0.1mm Increment | Shaft I.D. d2 Change Hole Dia. [RDC] Specified in 0.1mm Increment | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 7 Days | 10 | 0.05 to 1.00 | 3 ~ 8 | 3 ~ 8 | 16 | 27 | 0.5 | 39000 | 9 x 10-7 | - | - | ||
- | 1 | 7 Days | 10 | 0.05 to 1.00 | 3 ~ 8 | - | 16 | 27 | 0.5 | 39000 | 9 x 10-7 | - | 3 ~ 8 | ||
- | 1 | 7 Days | 10 | 0.05 to 1.00 | 3 ~ 8 | 1 | 16 | 27 | 0.5 | 39000 | 9 x 10-7 | - | - | ||
- | 1 | 7 Days | 10 | 0.05 to 1.00 | - | 3 ~ 8 | 16 | 27 | 0.5 | 39000 | 9 x 10-7 | 3 ~ 8 | - | ||
- | 1 | 7 Days | 10 | 0.05 to 1.00 | - | - | 16 | 27 | 0.5 | 39000 | 9 x 10-7 | 3 ~ 8 | 3 ~ 8 | ||
- | 1 | 7 Days | 10 | 0.05 to 1.00 | - | 1 | 16 | 27 | 0.5 | 39000 | 9 x 10-7 | 3 ~ 8 | - | ||
- | 1 | 7 Days | 10 | 0.05 to 1.00 | 1 | 3 ~ 8 | 16 | 27 | 0.5 | 39000 | 9 x 10-7 | - | - | ||
- | 1 | 7 Days | 10 | 0.05 to 1.00 | 1 | - | 16 | 27 | 0.5 | 39000 | 9 x 10-7 | - | 3 ~ 8 | ||
- | 1 | 7 Days | 10 | 0.05 to 1.00 | 1 | 1 | 16 | 27 | 0.5 | 39000 | 9 x 10-7 | - | - | ||
- | 1 | 7 Days | 10 | 0.05 to 1.00 | 5 ~ 10 | 5 ~ 10 | 20 | 34 | 1 | 31000 | 2.7x10-6 | - | - | ||
- | 1 | 7 Days | 10 | 0.05 to 1.00 | 5 ~ 10 | - | 20 | 34 | 1 | 31000 | 2.7x10-6 | - | 5 ~ 10 | ||
- | 1 | 7 Days | 10 | 0.05 to 1.00 | 5 ~ 10 | 1 | 20 | 34 | 1 | 31000 | 2.7x10-6 | - | - | ||
- | 1 | 7 Days | 10 | 0.05 to 1.00 | - | 5 ~ 10 | 20 | 34 | 1 | 31000 | 2.7x10-6 | 5 ~ 10 | - | ||
- | 1 | 7 Days | 10 | 0.05 to 1.00 | - | - | 20 | 34 | 1 | 31000 | 2.7x10-6 | 5 ~ 10 | 5 ~ 10 | ||
- | 1 | 7 Days | 10 | 0.05 to 1.00 | - | 1 | 20 | 34 | 1 | 31000 | 2.7x10-6 | 5 ~ 10 | - | ||
- | 1 | 7 Days | 10 | 0.05 to 1.00 | 1 | 5 ~ 10 | 20 | 34 | 1 | 31000 | 2.7x10-6 | - | - | ||
- | 1 | 7 Days | 10 | 0.05 to 1.00 | 1 | - | 20 | 34 | 1 | 31000 | 2.7x10-6 | - | 5 ~ 10 | ||
- | 1 | 7 Days | 10 | 0.05 to 1.00 | 1 | 1 | 20 | 34 | 1 | 31000 | 2.7x10-6 | - | - | ||
- | 1 | 7 Days | 10 | 1.01 to 3.00 | 6 ~ 12 | 6 ~ 12 | 25 | 41 | 1.5 | 25000 | 8.1x10-6 | - | - | ||
- | 1 | 7 Days | 10 | 1.01 to 3.00 | 6 ~ 12 | - | 25 | 41 | 1.5 | 25000 | 8.1x10-6 | - | 6 ~ 11.9 | ||
- | 1 | 7 Days | 10 | 1.01 to 3.00 | - | 6 ~ 12 | 25 | 41 | 1.5 | 25000 | 8.1x10-6 | 6 ~ 11.9 | - | ||
- | 1 | 7 Days | 10 | 1.01 to 3.00 | - | - | 25 | 41 | 1.5 | 25000 | 8.1x10-6 | 6 ~ 11.9 | 6 ~ 11.9 | ||
- | 1 | 7 Days | 10 | 1.01 to 3.00 | 8 ~ 14 | 8 ~ 14 | 32 | 48 | 3 | 19000 | 2.5x10-5 | - | - | ||
- | 1 | 7 Days | 10 | 1.01 to 3.00 | 8 ~ 14 | - | 32 | 48 | 3 | 19000 | 2.5x10-5 | - | 8 ~ 14 | ||
- | 1 | 7 Days | 10 | 1.01 to 3.00 | - | 8 ~ 14 | 32 | 48 | 3 | 19000 | 2.5x10-5 | 8 ~ 14 | - | ||
- | 1 | 7 Days | 10 | 1.01 to 3.00 | - | - | 32 | 48 | 3 | 19000 | 2.5x10-5 | 8 ~ 14 | 8 ~ 14 |
Loading...
Series Name | Oldham Type | Allowable Misalignment | Angular Misalignment / Eccentricity | Application | Standard |
---|---|---|---|---|---|
Max. Rotational Speed Range(r/min) | 10,001 to 78,000 | Features | Low Moment of Inertia | Body Material | Zinc Alloy |
Category | Coupling Main Body | Allowable Lateral Misalignment Range(mm) | 0.02 to 0.2 | Allowable Lateral Misalignment(mm) | 0.2 |
Allowable Angular Misalignment(deg) | 2 | Operating Temperature(°C) | -20::60 |
Configure
Basic Attributes
Allowable Torque Range(N•m)
Shaft Bore Dia. 1 d1 (or d)(mm)
Shaft Bore Dia. 2 d2 (or d)(mm)
O.D. D(mm)
Overall Length(mm)
Allowable Torque(Nm)
Max. Rotational Speed(r/min)
Shaft I.D. d1 Change Hole Dia. [LDC] Specified in 0.1mm Increment
Shaft I.D. d2 Change Hole Dia. [RDC] Specified in 0.1mm Increment
Type
Filter by CAD data type
Filter by standard shipping days
Optional Attributes