• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Slot Pins for Inspection Jigs / Oval Straight Type

Slot Pins for Inspection Jigs / Oval Straight Type

MISUMI

MISUMI

[Features] Elliptical straight/stepped insertion pin for test gauges.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Slot Pins for Inspection Jigs/Oval Straight Type:Related Image
 
MaterialHardness Straight Stepped Straight
TypeType
P   0
-0.02		S   0
-0.02/F   0
-0.05		Sg6/F   0
-0.03
EN 1.1191 Equiv.-KJPSCKJPDCKJPGDC
EN 1.1191 Equiv.45HRC~KJPSHCKJPDHCKJPGDHC
EN 1.4301 Equiv.-KJPSCSKJPDCS-
1 EN 1.4037 Equiv.45~50HRCKJPSCC-KJPGDCC

Specifications

Part Number (TYPE, D)-P-W-S-F-L-B
KJPDC16-P10.97-W8.47-S6.00-F2.0-L5-B10
Sg6
3.00-0.002
-0.008
3.01~ 6.00-0.004
-0.012
6.01~10.00-0.005
-0.014
10.01~18.00-0.006
-0.017
18.01~29.00-0.007
-0.020
Part Number0.01mm Increment0.1mm Increment1mm IncrementM
StraightStepped StraightDPWS
Stepped Type only		F(F≤S/2)
Stepped Type only		LB
Stepped Type only
(P   0
-0.02)		(S   0
-0.02/F   0
-0.05)		(Sg6/F   0
-0.03)
(EN 1.1191 Equiv.)
KJPSC

(EN 1.1191 Equiv. Hardened)
KJPSHC

(EN 1.4301 Equiv.)
KJPSCS

(EN 1.4037 Equiv.)
KJPSCC		(EN 1.1191 Equiv.)
KJPDC

(EN 1.1191 Equiv. Hardened)
KJPDHC

(EN 1.4301 Equiv.)
KJPDCS		(EN 1.1191 Equiv.)
KJPGDC

(EN 1.1191 Equiv. Hardened)
KJPGDHC

(EN 1.4037 Equiv.)
KJPGDCC		 8 4.00~ 6.00P>W>S
(W≥3.01)		 3.00~ 5.000.3~ 2.5Straight
5~30*1


Stepped Straight
5~20		5~20M4
10 4.00~ 8.00 3.00~ 7.000.3~ 3.5M5
12 4.00~10.00 3.00~ 9.000.5~ 4.5M5
16 6.00~14.00 4.00~13.000.5~ 6.5M5
2010.00~18.00 6.00~17.001.0~ 8.5M5
2514.00~22.00 8.00~21.002.0~10.5M5
10L10.00~16.00 5.00~15.001.0~ 7.5M5
12L12.00~20.00 6.00~19.002.0~ 9.5M5
16L16.00~25.00 8.00~24.002.0~12.0M5
20L20.00~30.0010.00~29.002.0~14.5M5
When the S dimension tolerance is g6, D-Shaped section cannot be made very thin. (S≥5.00, F≥1.0; F≥1.5 when D=20)
*1. L=21 ~ 30 is available only when the following conditions are all satisfied: Material: EN 1.1191 Equiv. Handle Dia. D≥10, Pin Dia.: P≥6, W≥5

Alterations

Slot Pins for Inspection Jigs/Oval Straight Type:Related Image

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
KJPDC8-P[4-6/0.01]-W[3.01-5.99/0.01]-S[3-5/0.01]-F[0.3-2.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDC10-P[4-8/0.01]-W[3.01-7.99/0.01]-S[3-7/0.01]-F[0.3-3.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDC10L-P[8-16/0.01]-W[3.01-15.99/0.01]-S[5-15/0.01]-F[1-7.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDC12-P[4-10/0.01]-W[3.01-10/0.01]-S[3-9/0.01]-F[0.5-4.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDC12L-P[10-20/0.01]-W[3.01-19.99/0.01]-S[6-19/0.01]-F[2-9.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDC16-P[6-14/0.01]-W[3.01-14/0.01]-S[4-13/0.01]-F[0.5-6.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDC16L-P[16-25/0.01]-W[3.01-24.99/0.01]-S[8-24/0.01]-F[2-12/0.1]-L[5-20/1]-B[5-20/1]
KJPDC20-P[10-18/0.01]-W[3.01-18/0.01]-S[6-17/0.01]-F[1-8.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDC20L-P[20-30/0.01]-W[3.01-29.99/0.01]-S[10-29/0.01]-F[2-14.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDC25-P[14-22/0.01]-W[3.01-22/0.01]-S[8-21/0.01]-F[2-10.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDCS8-P[4-6/0.01]-W[3.01-5.99/0.01]-S[3-5/0.01]-F[0.3-2.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDCS10-P[4-8/0.01]-W[3.01-7.99/0.01]-S[3-7/0.01]-F[0.3-3.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDCS12-P[4-10/0.01]-W[3.01-9.99/0.01]-S[3-9/0.01]-F[0.5-4.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDCS16-P[6-14/0.01]-W[3.01-13.99/0.01]-S[4-13/0.01]-F[0.5-6.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDCS20-P[10-18/0.01]-W[3.01-17.99/0.01]-S[6-17/0.01]-F[1-8.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDCS25-P[14-22/0.01]-W[3.01-21.99/0.01]-S[8-21/0.01]-F[2-10.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC8-P[4-6/0.01]-W[3.01-5.99/0.01]-S[3-5/0.01]-F[0.3-2.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC10-P[4-8/0.01]-W[3.01-8/0.01]-S[3-7/0.01]-F[0.3-3.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC10L-P[8-16/0.01]-W[3.01-15.99/0.01]-S[5-15/0.01]-F[1-7.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC12-P[4-10/0.01]-W[3.01-10/0.01]-S[3-9/0.01]-F[0.5-4.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC12L-P[10-20/0.01]-W[3.01-19.99/0.01]-S[6-19/0.01]-F[2-9.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC16-P[6-14/0.01]-W[3.01-14/0.01]-S[4-13/0.01]-F[0.5-6.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC16L-P[16-25/0.01]-W[3.01-24.99/0.01]-S[8-24/0.01]-F[2-12/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC20-P[10-18/0.01]-W[3.01-18/0.01]-S[6-17/0.01]-F[1-8.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC20L-P[20-30/0.01]-W[3.01-29.99/0.01]-S[10-29/0.01]-F[2-14.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC25-P[14-22/0.01]-W[3.01-22/0.01]-S[8-21/0.01]-F[2-10.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC10-P[4-8/0.01]-W[5-7.99/0.01]-S[3-7/0.01]-F[0.3-3.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC10L-P[10-16/0.01]-W[3.01-15.99/0.01]-S[5-15/0.01]-F[1-7/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC12-P[4-10/0.01]-W[5-9.99/0.01]-S[3-9/0.01]-F[0.5-4.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC12L-P[12-20/0.01]-W[3.01-19.99/0.01]-S[6-19/0.01]-F[2-9/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC16-P[6-14/0.01]-W[5-14/0.01]-S[4-13/0.01]-F[0.5-6.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC16L-P[16-25/0.01]-W[3.01-24.99/0.01]-S[8-24/0.01]-F[2-12/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC20-P[10-18/0.01]-W[6-18/0.01]-S[6-17/0.01]-F[1-8.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC20L-P[20-30/0.01]-W[3.01-29.99/0.01]-S[10-29/0.01]-F[2-14.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC25-P[14-22/0.01]-W[8-22/0.01]-S[8-21/0.01]-F[2-10.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDCC10-P[4-8/0.01]-W[5-8/0.01]-S[5-7/0.01]-F[0.3-3.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDCC12-P[4-10/0.01]-W[5-10/0.01]-S[3-9/0.01]-F[0.5-4.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDCC16-P[6-14/0.01]-W[5-14/0.01]-S[4-13/0.01]-F[0.5-6.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDCC20-P[10-18/0.01]-W[6-18/0.01]-S[6-17/0.01]-F[1-8.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDCC25-P[14-22/0.01]-W[8-22/0.01]-S[8-21/0.01]-F[2-10.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC10-P[4-8/0.01]-W[3.01-8/0.01]-S[3-7/0.01]-F[0.3-3.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC10L-P[10-16/0.01]-W[3.01-15.99/0.01]-S[5-15/0.01]-F[1-7/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC12-P[4-10/0.01]-W[3.01-10/0.01]-S[3-9/0.01]-F[0.5-4.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC12L-P[12-20/0.01]-W[3.01-19.99/0.01]-S[6-19/0.01]-F[2-9/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC16-P[6-14/0.01]-W[5-14/0.01]-S[4-13/0.01]-F[0.5-6.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC16L-P[16-25/0.01]-W[3.01-24.99/0.01]-S[8-24/0.01]-F[2-12/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC20-P[10-18/0.01]-W[6-18/0.01]-S[6-17/0.01]-F[1-8.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC20L-P[20-30/0.01]-W[3.01-29.99/0.01]-S[10-29/0.01]-F[2-14.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC25-P[14-22/0.01]-W[8-22/0.01]-S[8-21/0.01]-F[2-10.5/0.1]-L[5-20/1]-B[5-20/1]
KJPSC8-P[4-6/0.01]-W[3.01-5.99/0.01]-L[5-20/1]
KJPSC10-P[4-8/0.01]-W[3.01-7.99/0.01]-L[5-30/1]
KJPSC10L-P[10-16/0.01]-W[3.01-15.99/0.01]-L[5-30/1]
KJPSC12-P[4-10/0.01]-W[3.01-9.99/0.01]-L[5-30/1]
KJPSC12L-P[12-20/0.01]-W[3.01-19.99/0.01]-L[5-30/1]
KJPSC16-P[6-14/0.01]-W[3.01-13.99/0.01]-L[5-30/1]
KJPSC16L-P[16-25/0.01]-W[3.01-24.99/0.01]-L[5-30/1]
KJPSC20-P[10-18/0.01]-W[3.01-17.99/0.01]-L[5-30/1]
KJPSC20L-P[20-30/0.01]-W[3.01-29.99/0.01]-L[5-30/1]
KJPSC25-P[14-22/0.01]-W[3.01-21.99/0.01]-L[5-30/1]
KJPSCC8-P[4-6/0.01]-W[3.01-5.99/0.01]-L[5-20/1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSShape Tip Shape Material Hardness Large Head/Small Head Stepped Insertion Part S Dimension Tolerance Outer Dia. D
(Ø) 		B
(mm) 		F
(mm) 		L
(mm) 		P
(mm) 		S
(mm) 		W
(mm)

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStepped0/-0.0285 ～ 200.3 ～ 2.55 ～ 204 ～ 63 ～ 53.01 ～ 5.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStepped0/-0.02105 ～ 200.3 ～ 3.55 ～ 204 ～ 83 ～ 73 ～ 7.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedLarge HeadStepped0/-0.02105 ～ 201 ～ 7.55 ～ 208 ～ 165 ～ 153 ～ 15.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStepped0/-0.02125 ～ 200.5 ～ 4.55 ～ 204 ～ 103 ～ 93 ～ 10

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedLarge HeadStepped0/-0.02125 ～ 202 ～ 9.55 ～ 2010 ～ 206 ～ 193 ～ 19.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStepped0/-0.02165 ～ 200.5 ～ 6.55 ～ 206 ～ 144 ～ 133 ～ 14

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedLarge HeadStepped0/-0.02165 ～ 202 ～ 125 ～ 2016 ～ 258 ～ 243 ～ 24.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStepped0/-0.02205 ～ 201 ～ 8.55 ～ 2010 ～ 186 ～ 173 ～ 18

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedLarge HeadStepped0/-0.02205 ～ 202 ～ 14.55 ～ 2020 ～ 3010 ～ 293 ～ 29.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStepped0/-0.02255 ～ 202 ～ 10.55 ～ 2014 ～ 228 ～ 213 ～ 22

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall HeadStepped0/-0.0285 ～ 200.3 ～ 2.55 ～ 204 ～ 63 ～ 53.01 ～ 5.99

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall HeadStepped0/-0.02105 ～ 200.3 ～ 3.55 ～ 204 ～ 83 ～ 73 ～ 7.99

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall HeadStepped0/-0.02125 ～ 200.5 ～ 4.55 ～ 204 ～ 103 ～ 93 ～ 9.99

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall HeadStepped0/-0.02165 ～ 200.5 ～ 6.55 ～ 206 ～ 144 ～ 133 ～ 13.99

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall HeadStepped0/-0.02205 ～ 201 ～ 8.55 ～ 2010 ～ 186 ～ 173 ～ 17.99

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall HeadStepped0/-0.02255 ～ 202 ～ 10.55 ～ 2014 ～ 228 ～ 213 ～ 21.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadStepped0/-0.0285 ～ 200.3 ～ 2.55 ～ 204 ～ 63 ～ 53.01 ～ 5.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadStepped0/-0.02105 ～ 200.3 ～ 3.55 ～ 204 ～ 83 ～ 73 ～ 8

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Large HeadStepped0/-0.02105 ～ 201 ～ 7.55 ～ 208 ～ 165 ～ 153 ～ 15.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadStepped0/-0.02125 ～ 200.5 ～ 4.55 ～ 204 ～ 103 ～ 93 ～ 10

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Large HeadStepped0/-0.02125 ～ 202 ～ 9.55 ～ 2010 ～ 206 ～ 193 ～ 19.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadStepped0/-0.02165 ～ 200.5 ～ 6.55 ～ 206 ～ 144 ～ 133 ～ 14

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Large HeadStepped0/-0.02165 ～ 202 ～ 125 ～ 2016 ～ 258 ～ 243 ～ 24.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadStepped0/-0.02205 ～ 201 ～ 8.55 ～ 2010 ～ 186 ～ 173 ～ 18

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Large HeadStepped0/-0.02205 ～ 202 ～ 14.55 ～ 2020 ～ 3010 ～ 293 ～ 29.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadStepped0/-0.02255 ～ 202 ～ 10.55 ～ 2014 ～ 228 ～ 213 ～ 22

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadSteppedg6105 ～ 200.3 ～ 3.55 ～ 204 ～ 83 ～ 75 ～ 7.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedLarge HeadSteppedg6105 ～ 201 ～ 75 ～ 2010 ～ 165 ～ 153 ～ 15.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadSteppedg6125 ～ 200.5 ～ 4.55 ～ 204 ～ 103 ～ 95 ～ 9.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedLarge HeadSteppedg6125 ～ 202 ～ 95 ～ 2012 ～ 206 ～ 193 ～ 19.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadSteppedg6165 ～ 200.5 ～ 6.55 ～ 206 ～ 144 ～ 135 ～ 14

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedLarge HeadSteppedg6165 ～ 202 ～ 125 ～ 2016 ～ 258 ～ 243 ～ 24.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadSteppedg6205 ～ 201 ～ 8.55 ～ 2010 ～ 186 ～ 176 ～ 18

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedLarge HeadSteppedg6205 ～ 202 ～ 14.55 ～ 2020 ～ 3010 ～ 293 ～ 29.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadSteppedg6255 ～ 202 ～ 10.55 ～ 2014 ～ 228 ～ 218 ～ 22

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall HeadSteppedg6105 ～ 200.3 ～ 3.55 ～ 204 ～ 85 ～ 75 ～ 8

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall HeadSteppedg6125 ～ 200.5 ～ 4.55 ～ 204 ～ 103 ～ 95 ～ 10

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall HeadSteppedg6165 ～ 200.5 ～ 6.55 ～ 206 ～ 144 ～ 135 ～ 14

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall HeadSteppedg6205 ～ 201 ～ 8.55 ～ 2010 ～ 186 ～ 176 ～ 18

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall HeadSteppedg6255 ～ 202 ～ 10.55 ～ 2014 ～ 228 ～ 218 ～ 22

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadSteppedg6105 ～ 200.3 ～ 3.55 ～ 204 ～ 83 ～ 73 ～ 8

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Large HeadSteppedg6105 ～ 201 ～ 75 ～ 2010 ～ 165 ～ 153 ～ 15.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadSteppedg6125 ～ 200.5 ～ 4.55 ～ 204 ～ 103 ～ 93 ～ 10

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Large HeadSteppedg6125 ～ 202 ～ 95 ～ 2012 ～ 206 ～ 193 ～ 19.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadSteppedg6165 ～ 200.5 ～ 6.55 ～ 206 ～ 144 ～ 135 ～ 14

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Large HeadSteppedg6165 ～ 202 ～ 125 ～ 2016 ～ 258 ～ 243 ～ 24.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadSteppedg6205 ～ 201 ～ 8.55 ～ 2010 ～ 186 ～ 176 ～ 18

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Large HeadSteppedg6205 ～ 202 ～ 14.55 ～ 2020 ～ 3010 ～ 293 ～ 29.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadSteppedg6255 ～ 202 ～ 10.55 ～ 2014 ～ 228 ～ 218 ～ 22

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStandard-8--5 ～ 204 ～ 6-3 ～ 5.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStandard-10--5 ～ 304 ～ 8-3 ～ 7.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedLarge HeadStandard-10--5 ～ 3010 ～ 16-3 ～ 15.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStandard-12--5 ～ 304 ～ 10-3 ～ 9.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedLarge HeadStandard-12--5 ～ 3012 ～ 20-3 ～ 19.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStandard-16--5 ～ 306 ～ 14-3 ～ 13.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedLarge HeadStandard-16--5 ～ 3016 ～ 25-3 ～ 24.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStandard-20--5 ～ 3010 ～ 18-3 ～ 17.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedLarge HeadStandard-20--5 ～ 3020 ～ 30-3 ～ 29.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStandard-25--5 ～ 3014 ～ 22-3 ～ 21.99

-

1 7 Days 10StraightOval[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall HeadStandard-8--5 ～ 204 ～ 6-3 ～ 5.99

Loading...

  1. 1
  2. 2
  3. Next >>
 

Basic information

Type Slot Pin Tip Type Straight Shape of Stepped Section Oval

Configure

Clear all

81Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Shape

    • Straight
    • Stepped

    Clear

  • Tip Shape

    • D Cut
    • Oval

    Clear

  • Material

    • Steel
      • EN 1.1191 Equiv.
    • Stainless Steel
      • EN 1.4037 Equiv.
      • EN 1.4301 Equiv.

    Clear

  • Hardness

    • 45HRC ~
    • 45 ~ 50HRC
    • No Hardened

    Clear

  • Large Head/Small Head

    • Large Head
    • Small Head

    Clear

  • Stepped

    • Standard
    • Stepped

    Clear

  • Insertion Part S Dimension Tolerance

    • 0/-0.02
    • g6

    Clear

  • Outer Dia. D(Ø)

    • 8
    • 10
    • 12
    • 16
    • 20
    • 25

    Clear

  • B(mm)

     [5-20/1mm Unit(s)]

    Clear

  • F(mm)

     [0.3-14.5/0.1mm Unit(s)]

    Clear

  • L(mm)

     [5-30/1mm Unit(s)]

    Clear

  • P(mm)

     [4-30/0.01mm Unit(s)]

    Clear

  • S(mm)

     [3-29/0.01mm Unit(s)]

    Clear

  • W(mm)

     [3.01-29.99/0.01mm Unit(s)]

    Clear

  • Type

    • KJPDC
    • KJPDCS
    • KJPDHC
    • KJPGDC
    • KJPGDCC
    • KJPGDHC
    • KJPSC
    • KJPSCC
    • KJPSCS
    • KJPSHC

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 7 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.