Terminal Blocks / Pneumatic / Outlets 2 Sides / No Inlets / Horizontal Mounting

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Terminal Blocks/Pneumatic/Outlets 2 Sides/No Inlets/Horizontal Mounting:Related Image

TypeMaterialSurface TreatmentMax. Operating Pressure
Pitch (P) StandardPitch (P) Configurable
15 Sq.20 Sq.25 Sq.35 Sq.20 Sq.25 Sq.35 Sq.
-BTANCBTABTANLBTANCPBTAPBTANLPAluminum Alloy 5000 series-1MPa≈10kgf/cm2 or less
BTANSABTANCABTAABTANLABTANCAP--Clear Anodize
Material of 15 Sq. is EN AW-6063 Equiv.

Specifications

Part Number       
 -R-S-P
Type Mounting Hole Change Number of Circuits      
BTA
BTAP
G-BTAP
 T
ZT
ZT
 3
4
4
-
-
-
R1
R2
R2
-
-
-
S2
S2
S2

-
-

P50
P50

(G Thread)

Part NumberRc (PT), NPT, M (Coarse) SelectionPitch PNumber of Pitches
N
Total Number of R and S ThreadsABEXYMounting Hole
TypeMounting Hole ChangeNumber of CircuitsR, SStandardConfigurable 1mm IncrementM
(15 Sq.)T (Tapped)1M3 (M3)
M4 (M4)
5 (M5)
--0215151557.5M4
Pitch Standard
BTANSA
 215-14
326
438
5410
6512
7614
8716
(20 Sq.)11 (1/8)
M3 (M3)
M4 (M4)
5 (M5)
--02202020510M5
Pitch Standard
BTANC
BTANCA
Pitch Configurable
BTANCP
BTANCAP
21515~5014
326
438
5410
6512
7614
8716
(25 Sq.)NA (Through)


T (Tapped)


ZT (Counterbore Tapped)
11 (1/8)
2 (1/4)
5 (M5)
1N (NPT1/8)
2N (NPT1/4)
--022525207.512.5M5
Pitch Standard
BTA
BTAA
Pitch Configurable
BTAP
22520~6014
326
438
5410
625~60512
7614
8716
(35 Sq.)12 (1/4)
3 (3/8)
4 (1/2)
--023535257.517.5M6
Pitch Standard
BTANL
BTANLA
Pitch Configurable
BTANLP
24035~6014
326
438
5410
6512
7614
8716
By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering. (Ex.: G-BTA) For ordering, see the Ordering Example.
For R and S, specify 1, 2, 3, 4, 5, M3, M4, 1N or 2N indicated before ( ). Single Circuit is not available for Pitch Configurable Type. Specify the pitch taking into consideration the necessary dimensions for fitting the couplings.
Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right. (Except 15 and 20 Sq.)

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
BTA1-[R1N,​R2N]-[S1N,​S2N]
BTA1-[R1N,​R2N]-S[1,​2,​5]
BTA1-R[1,​2,​5]-[S1N,​S2N]
BTA1-R[1,​2,​5]-S[1,​2,​5]
BTA2-[R1N,​R2N]-[S1N,​S2N]
BTA2-[R1N,​R2N]-S[1,​2,​5]
BTA2-R[1,​2,​5]-[S1N,​S2N]
BTA2-R[1,​2,​5]-S[1,​2,​5]
BTA3-[R1N,​R2N]-[S1N,​S2N]
BTA3-[R1N,​R2N]-S[1,​2,​5]
BTA3-R[1,​2,​5]-[S1N,​S2N]
BTA3-R[1,​2,​5]-S[1,​2,​5]
BTA4-[R1N,​R2N]-[S1N,​S2N]
BTA4-[R1N,​R2N]-S[1,​2,​5]
BTA4-R[1,​2,​5]-[S1N,​S2N]
BTA4-R[1,​2,​5]-S[1,​2,​5]
BTA5-[R1N,​R2N]-[S1N,​S2N]
BTA5-[R1N,​R2N]-S[1,​2,​5]
BTA5-R[1,​2,​5]-[S1N,​S2N]
BTA5-R[1,​2,​5]-S[1,​2,​5]
BTA6-[R1N,​R2N]-[S1N,​S2N]
BTA6-[R1N,​R2N]-S[1,​2,​5]
BTA6-R[1,​2,​5]-[S1N,​S2N]
BTA6-R[1,​2,​5]-S[1,​2,​5]
BTA7-[R1N,​R2N]-[S1N,​S2N]
BTA7-[R1N,​R2N]-S[1,​2,​5]
BTA7-R[1,​2,​5]-[S1N,​S2N]
BTA7-R[1,​2,​5]-S[1,​2,​5]
BTA8-[R1N,​R2N]-[S1N,​S2N]
BTA8-[R1N,​R2N]-S[1,​2,​5]
BTA8-R[1,​2,​5]-[S1N,​S2N]
BTA8-R[1,​2,​5]-S[1,​2,​5]
BTAA1-[R1N,​R2N]-[S1N,​S2N]
BTAA1-[R1N,​R2N]-S[1,​2,​5]
BTAA1-R[1,​2,​5]-[S1N,​S2N]
BTAA1-R[1,​2,​5]-S[1,​2,​5]
BTAA2-[R1N,​R2N]-[S1N,​S2N]
BTAA2-[R1N,​R2N]-S[1,​2,​5]
BTAA2-R[1,​2,​5]-[S1N,​S2N]
BTAA2-R[1,​2,​5]-S[1,​2,​5]
BTAA3-[R1N,​R2N]-[S1N,​S2N]
BTAA3-[R1N,​R2N]-S[1,​2,​5]
BTAA3-R[1,​2,​5]-[S1N,​S2N]
BTAA3-R[1,​2,​5]-S[1,​2,​5]
BTAA4-[R1N,​R2N]-[S1N,​S2N]
BTAA4-[R1N,​R2N]-S[1,​2,​5]
BTAA4-R[1,​2,​5]-[S1N,​S2N]
BTAA4-R[1,​2,​5]-S[1,​2,​5]
BTAA5-[R1N,​R2N]-[S1N,​S2N]
BTAA5-[R1N,​R2N]-S[1,​2,​5]
BTAA5-R[1,​2,​5]-[S1N,​S2N]
BTAA5-R[1,​2,​5]-S[1,​2,​5]
BTAA6-[R1N,​R2N]-[S1N,​S2N]
BTAA6-[R1N,​R2N]-S[1,​2,​5]
BTAA6-R[1,​2,​5]-[S1N,​S2N]
BTAA6-R[1,​2,​5]-S[1,​2,​5]
BTAA7-[R1N,​R2N]-[S1N,​S2N]
BTAA7-[R1N,​R2N]-S[1,​2,​5]
BTAA7-R[1,​2,​5]-[S1N,​S2N]
BTAA7-R[1,​2,​5]-S[1,​2,​5]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Surface Treatment Block Size
(mm)
Number of Circuits
(Circuits)
Thread Size / Type Mounting Hole Change Pitch P
(mm)
Pitch Standard / Configurable Drawing R Part Thread Dia. NPT Selection [R] Drawing S Part Thread Dia. NPT Selection [S] Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4) Select a value for M Thread (Coarse) Dia. on S (in Drawing). [SM] 3(M3) 4(M4) Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) Select a value for PT/PF, M Thread (Coarse) Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 251Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]1/4 [S2N] / 1/8 [S1N]----

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 251Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 251Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [S2N] / 1/8 [S1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 251Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 252Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]1/4 [S2N] / 1/8 [S1N]----

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 252Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 252Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [S2N] / 1/8 [S1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 252Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 253Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]1/4 [S2N] / 1/8 [S1N]----

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 253Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 253Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [S2N] / 1/8 [S1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 253Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 254Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]1/4 [S2N] / 1/8 [S1N]----

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 254Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 254Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [S2N] / 1/8 [S1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 254Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 255Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]1/4 [S2N] / 1/8 [S1N]----

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 255Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 255Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [S2N] / 1/8 [S1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 255Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 256Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]1/4 [S2N] / 1/8 [S1N]----

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 256Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 256Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [S2N] / 1/8 [S1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 256Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 257Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]1/4 [S2N] / 1/8 [S1N]----

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 257Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 257Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [S2N] / 1/8 [S1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 257Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 258Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]1/4 [S2N] / 1/8 [S1N]----

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 258Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 258Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [S2N] / 1/8 [S1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 258Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 251Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]1/4 [S2N] / 1/8 [S1N]----

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 251Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 251Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [S2N] / 1/8 [S1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 251Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 252Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]1/4 [S2N] / 1/8 [S1N]----

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 252Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 252Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [S2N] / 1/8 [S1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 252Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 253Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]1/4 [S2N] / 1/8 [S1N]----

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 253Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 253Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [S2N] / 1/8 [S1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 253Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 254Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]1/4 [S2N] / 1/8 [S1N]----

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 254Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 254Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [S2N] / 1/8 [S1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 254Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 255Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]1/4 [S2N] / 1/8 [S1N]----

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 255Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 255Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [S2N] / 1/8 [S1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 255Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 256Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]1/4 [S2N] / 1/8 [S1N]----

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 256Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 256Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [S2N] / 1/8 [S1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 256Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 257Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]1/4 [S2N] / 1/8 [S1N]----

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 257Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type1/4 [R2N] / 1/8 [R1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 257Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type-1/4 [S2N] / 1/8 [S1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 257Standard Thread {PT, M (Coarse) Thread}Not Specified (Counterbore)-Fixed Type----1 ~ 51 ~ 5

Loading...

Basic information

Shape Vertical Through Hole Application Pneumatic

Complementary Products

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360