Spur gears / plastic / contact angle 20 degrees
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
GEABMT1.5-18-15-B-[8,10]
| Type | Material | Accessory | |
| Gears | Metal Hub Insert | ||
| GEABM | MC Nylon | - | Set Screw (EN 1.7220 Equiv., Black Oxide) |
| GEABMS | EN 1.1191 Equiv. | ||
| GEABMT | EN 1.4301 Equiv. | Set Screw (EN 1.4301 Equiv.) | |
| GEABP | Polyacetal | - | Set Screw (EN 1.7220 Equiv., Black Oxide) |
| GEABPS | EN 1.1191 Equiv. | ||
| GEABPT | EN 1.4301 Equiv. | Set Screw (EN 1.4301 Equiv.) | |
Specifications
| Part Number | - | Number of Teeth | - | B | - | Gears Shape | - | P |
| GEABM1.0 GEABPS2.0 GEABM0.5 | - - - | 20 40 20 | - - - | 10 20 8 | - - - | A B K | - - - | 8 20 7 |
| Part Number | Number of Teeth | B | Gear Shape | Shaft Bore Dia. PH7 Selection | d Reference Dia. | D Tip Dia. | G Root Dia. | H | L | ℓ1 | ℓ2 | M (Coarse) | d1 | *1. Allowable Transmission Force (N, m) Bending Strength | Unit Price | |||||
| GEABM GEABP | GEABMS GEABPS | GEABMT GEABPT | ||||||||||||||||||
| Type | Module | W/o Metal Hub Insert | With Metal Hub Insert | MC Nylon | Polyacetal | |||||||||||||||
| GEABM (MC Nylon) GEABP (Polyacetal) GEABMS (With Metal Hub Insert, MC Nylon) GEABPS (With Metal Hub Insert, Polyacetal) GEABMT (Stainless Steel with Metal Hub Insert, MC Nylon) GEABPT (Stainless Steel with Metal Hub Insert, Polyacetal) | 0.5 | *15 | 8 | K | 3~5 | - | 7.5 | 8.5 | 6.25 | 9 | 18 | 10 | 3 | M3 | - | 0.08 | 0.33 | - | - | |
| *16 | 8 | 9 | 6.75 | 0.09 | 0.36 | |||||||||||||||
| *18 | 3~7 | 9 | 10 | 7.75 | 10 | 0.11 | 0.42 | |||||||||||||
| *20 | 10 | 11 | 8.75 | 11 | 0.12 | 0.49 | ||||||||||||||
| *20 | 3 | B | 3~5 | 10 | 11 | 8.75 | 8.5 | 8 (B=3) 7 (B=2) | 5 | 2.5 | 0.05 | 0.18 | ||||||||
| *24 | 3~7 | 12 | 13 | 10.75 | 10 | 0.06 | 0.23 | |||||||||||||
| *25 | 12.5 | 13.5 | 11.25 | 0.06 | 0.24 | |||||||||||||||
| *28 | 14 | 15 | 12.75 | 0.07 | 0.28 | |||||||||||||||
| *30 | 15 | 16 | 13.75 | 0.08 | 0.31 | |||||||||||||||
| *32 | 16 | 17 | 14.75 | 0.08 | 0.33 | |||||||||||||||
| *36 | 18 | 19 | 16.75 | 0.10 | 0.39 | |||||||||||||||
| *40 | 2 3 | 20 | 21 | 18.75 | 0.11 | 0.44 | ||||||||||||||
| *45 | 22.5 | 23.5 | 21.25 | 0.13 | 0.51 | |||||||||||||||
| *48 | 24 | 25 | 22.75 | 0.14 | 0.55 | |||||||||||||||
| *50 | 25 | 26 | 23.75 | 0.15 | 0.58 | |||||||||||||||
| *56 | 3 | 28 | 29 | 26.75 | 0.17 | 0.67 | ||||||||||||||
| *60 | 30 | 31 | 28.75 | 0.18 | 0.73 | |||||||||||||||
| *64 | 32 | 33 | 30.75 | 0.20 | 0.78 | |||||||||||||||
| *70 | 3~8 | 35 | 36 | 33.75 | 12 | 0.22 | 0.86 | |||||||||||||
| *72 | 36 | 37 | 34.75 | 0.22 | 0.89 | |||||||||||||||
| *80 | 40 | 41 | 38.75 | 0.25 | 0.99 | |||||||||||||||
| *90 | 3~9 | 45 | 46 | 43.75 | 14 | 0.28 | 1.13 | |||||||||||||
| *100 | 50 | 51 | 48.75 | 0.32 | 1.27 | |||||||||||||||
| *120 | 60 | 61 | 58.75 | 0.39 | 1.54 | |||||||||||||||
| 0.8 | *12 | 7 | K | 4~7 | - | 9.6 | 11.2 | 7.6 | 11.2 | 20 | 13 | 3 | M3 | - | 0.13 | 0.50 | - | - | ||
| *14 | 4~8 | 11.2 | 12.8 | 9.2 | 12.8 | 0.17 | 0.66 | |||||||||||||
| *15 | 4~9 | 12 | 13.6 | 10 | 13.6 | 0.18 | 0.73 | |||||||||||||
| *16 | 5 | B | 4~7 | 12.8 | 14.4 | 10.8 | 10 | 14 | 9 | 0.15 | 0.58 | |||||||||
| *18 | 14.4 | 16 | 12.4 | 0.17 | 0.67 | |||||||||||||||
| *20 | 16 | 17.6 | 14 | 0.20 | 0.78 | |||||||||||||||
| *24 | 5~8 | 19.2 | 20.8 | 17.2 | 12.5 | 0.25 | 0.98 | |||||||||||||
| *25 | 20 | 21.6 | 18 | 0.26 | 1.04 | |||||||||||||||
| *28 | 22.4 | 24 | 20.4 | 0.30 | 1.20 | |||||||||||||||
| *30 | 24 | 25.6 | 22 | 0.33 | 1.30 | |||||||||||||||
| *32 | 25.6 | 27.2 | 23.6 | 4 | 0.36 | 1.42 | ||||||||||||||
| *36 | 6~9 | 28.8 | 30.4 | 26.8 | 14 | M4 | 0.42 | 1.65 | ||||||||||||
| *40 | 32 | 33.6 | 30 | 0.47 | 1.88 | |||||||||||||||
| *45 | 36 | 37.6 | 34 | 0.55 | 2.18 | |||||||||||||||
| *48 | 38.4 | 40 | 36.4 | 0.59 | 2.36 | |||||||||||||||
| *50 | 40 | 41.6 | 38 | 0.63 | 2.49 | |||||||||||||||
| *56 | 44.8 | 46.4 | 42.8 | 0.72 | 2.85 | |||||||||||||||
| *60 | 48 | 49.6 | 46 | 0.78 | 3.11 | |||||||||||||||
| *64 | 51.2 | 52.8 | 49.2 | 0.84 | 3.33 | |||||||||||||||
| *70 | 6~11 | 56 | 57.6 | 54 | 16 | 0.92 | 3.66 | |||||||||||||
| *72 | 57.6 | 59.2 | 55.6 | 0.95 | 3.78 | |||||||||||||||
| *80 | 64 | 65.6 | 62 | 1.07 | 4.24 | |||||||||||||||
| *90 | 6~14 | 72 | 73.6 | 70 | 20 | 1.21 | 4.83 | |||||||||||||
| *100 | 6~16 | 80 | 81.6 | 78 | 24 | 1.37 | 5.43 | |||||||||||||
| *120 | 6~21 | 96 | 97.6 | 94 | 30 | 1.66 | 6.58 | |||||||||||||
| 1.0 | 15 | 12 | A | 6~10 | 6 | 15 | 17 | 12.5 | - | - | - | - | - | P+4 | 0.49 | 1.71 | ||||
| *16 | K | 8~12 | - | 16 | 18 | 13.5 | 18 | 25 | 13 | 3 | M3 | - | 0.54 | 1.89 | - | - | ||||
| 18 | 10 | A B | 8~10 | 8 | 18 | 20 | 15.5 | 15 | 20 | 10 | 4 | M4 | P+4 | 0.53 | 1.84 | |||||
| 20 | 8~11 | 20 | 22 | 17.5 | 16 | 0.61 | 2.13 | |||||||||||||
| 22 | 8~12 | 22 | 24 | 19.5 | 18 | 0.69 | 2.41 | |||||||||||||
| 24 | 8~14 | 8, 10 | 24 | 26 | 21.5 | 20 | 0.77 | 2.69 | ||||||||||||
| 25 | 25 | 27 | 22.5 | 0.82 | 2.84 | |||||||||||||||
| 26 | 8~15 | 26 | 28 | 23.5 | 22 | 0.86 | 3.00 | |||||||||||||
| 28 | 28 | 30 | 25.5 | 0.94 | 3.28 | |||||||||||||||
| 30 | 10~17 | 10, 12 | 30 | 32 | 27.5 | 25 | 1.03 | 3.56 | ||||||||||||
| 32 | 10~18 | 32 | 34 | 29.5 | 26 | 1.11 | 3.87 | |||||||||||||
| 35 | 35 | 37 | 32.5 | 1.25 | 4.34 | |||||||||||||||
| 36 | 10~19 | 10, 12, 15 | 36 | 38 | 33.5 | 28 | 1.30 | 4.51 | ||||||||||||
| 40 | 10~21 | 40 | 42 | 37.5 | 30 | 1.48 | 5.15 | |||||||||||||
| 45 | 45 | 47 | 42.5 | 1.71 | 5.95 | |||||||||||||||
| 48 | 48 | 50 | 45.5 | 1.86 | 6.45 | |||||||||||||||
| 50 | 10~24 | 10, 12, 15, 20 | 50 | 52 | 47.5 | 35 | 1.96 | 6.80 | ||||||||||||
| 55 | 55 | 57 | 52.5 | 2.20 | 7.63 | |||||||||||||||
| 60 | 60 | 62 | 57.5 | 2.44 | 8.49 | |||||||||||||||
| 70 | 10~28 | 70 | 72 | 67.5 | 40 | 2.88 | 10.02 | |||||||||||||
| 75 | 75 | 77 | 72.5 | 3.11 | 10.80 | |||||||||||||||
| 80 | 80 | 82 | 77.5 | 3.33 | 11.59 | |||||||||||||||
| 90 | 90 | 92 | 87.5 | 3.80 | 13.19 | |||||||||||||||
| 100 | 100 | 102 | 97.5 | 4.27 | 14.84 | |||||||||||||||
| 120 | 120 | 122 | 117.5 | 5.18 | 17.99 | |||||||||||||||
| 1.5 | 15 | 15 | A B | 8~12 | 8 | 22.5 | 25.5 | 18.75 | 18 | 24 | 9 | 3 | M3 | P+4 | 1.38 | 3.16 | ||||
| 16 | 8~14 | 8, 10 | 24 | 27 | 20.25 | 20 | 1.53 | 3.50 | ||||||||||||
| 18 | 8~15 | 27 | 30 | 23.25 | 22 | 27 | 12 | 4 | M4 | 1.79 | 4.08 | |||||||||
| 20 | 8~17 | 8, 10, 12 | 30 | 33 | 26.25 | 25 | 2.07 | 4.73 | ||||||||||||
| 24 | 8~21 | 8, 10, 12, 15 | 36 | 39 | 32.25 | 30 | 2.61 | 5.97 | ||||||||||||
| 25 | 8~21 | 37.5 | 40.5 | 33.75 | 2.76 | 6.30 | ||||||||||||||
| 26 | 8~22 | 39 | 42 | 35.25 | 32 | 2.91 | 6.65 | |||||||||||||
| 28 | 8~23 | 42 | 45 | 38.25 | 34 | 3.18 | 7.27 | |||||||||||||
| 30 | 8~24 | 8, 10, 12, 15, 20 | 45 | 48 | 41.25 | 35 | 3.46 | 7.90 | ||||||||||||
| 32 | 8~28 | 48 | 51 | 44.25 | 40 | 3.76 | 8.58 | |||||||||||||
| 35 | 8~28 | 52.5 | 55.5 | 48.75 | 4.22 | 9.63 | ||||||||||||||
| 36 | 8~28 | 54 | 57 | 50.25 | 4.38 | 10.00 | ||||||||||||||
| 40 | 10~31 | 10, 12, 15, 20, 25 | 60 | 63 | 56.25 | 45 | 5.00 | 11.42 | ||||||||||||
| 45 | 10~31 | 67.5 | 70.5 | 63.75 | 5.78 | 13.20 | ||||||||||||||
| 48 | 10~31 | 72 | 75 | 68.25 | 6.27 | 14.31 | ||||||||||||||
| 50 | 10~31 | 75 | 78 | 71.25 | 6.60 | 15.08 | ||||||||||||||
| 60 | 10~35 | 90 | 93 | 86.25 | 50 | 8.24 | 18.83 | |||||||||||||
| 70 | 12~35 | 12, 15, 20, 25 | 105 | 108 | 101.25 | 9.72 | 22.21 | |||||||||||||
| 80 | 12~38 | 120 | 123 | 116.25 | 55 | 11.25 | 25.70 | |||||||||||||
*1 Allowable Transmission Forces in the table are reference values calculated with prescribed conditions. For conditions, see >> P. 1498. Tooth width is calculated as 10mm.
Module 0.5 with 40 ~ 50 teeth is calculated as tooth width 3mm.
■Module 2.0, 2.5, 3.0
| Part Number | Number of Teeth | B | Gear Shape | Shaft Bore Dia. PH7 Selection | d Reference Dia. | D Tip Dia. | G Root Dia. | H | L | ℓ1 | ℓ2 | M (Coarse) | d1 | *1. Allowable Transmission Force (N, m) Bending Strength | Unit Price | |||||
| GEABM GEABP | GEABMS GEABPS | GEABMT GEABPT | ||||||||||||||||||
| Type | Module | W/o Metal Hub Insert | With Metal Hub Insert | MC Nylon | Polyacetal | |||||||||||||||
| GEABM (MC Nylon) GEABP (Polyacetal) GEABMS (With Metal Hub Insert, MC Nylon) GEABPS (With Metal Hub Insert, Polyacetal) GEABMT (Stainless Steel with Metal Hub Insert, MC Nylon) GEABPT (Stainless Steel with Metal Hub Insert, Polyacetal) | 2.0 | *12 | 20 | A B | 10~12 | - | 24 | 28 | 19.0 | 18 | 34 | 14 | 4 | M4 | - | 2.25 | 2.45 | - | - | |
| 14 | 10~14 | 10 | 28 | 32 | 23.0 | 20 | P+4 | 2.96 | 3.23 | |||||||||||
| 15 | 10~16 | 10, 12 | 30 | 34 | 25.0 | 24 | 3.28 | 3.59 | ||||||||||||
| 16 | 10~17 | 10, 12, 15 | 32 | 36 | 27.0 | 25 | 3.63 | 3.97 | ||||||||||||
| 18 | 10~21 | 36 | 40 | 31.0 | 30 | 4.24 | 4.63 | |||||||||||||
| 20 | 10~23 | 40 | 44 | 35.0 | 33 | 4.91 | 5.36 | |||||||||||||
| 24 | 10~28 | 10, 12, 15, 20 | 48 | 52 | 43.0 | 40 | 6.19 | 6.77 | ||||||||||||
| 25 | 50 | 54 | 45.0 | 6.54 | 7.15 | |||||||||||||||
| 28 | 10~31 | 10, 12, 15, 20, 25 | 56 | 60 | 51.0 | 45 | 7.54 | 8.24 | ||||||||||||
| 30 | 10~33 | 60 | 64 | 55.0 | 48 | 8.20 | 8.96 | |||||||||||||
| 32 | 12~35 | 12, 15, 20, 25, 30 | 64 | 68 | 59.0 | 50 | 8.91 | 9.73 | ||||||||||||
| 35 | 12~35 | 70 | 74 | 65.0 | 9.99 | 10.92 | ||||||||||||||
| 36 | 12~35 | 72 | 76 | 67.0 | 10.38 | 11.34 | ||||||||||||||
| 40 | 12~42 | 80 | 84 | 75.0 | 60 | 11.86 | 12.95 | |||||||||||||
| 45 | 90 | 94 | 85.0 | 13.70 | 14.97 | |||||||||||||||
| 48 | 96 | 100 | 91.0 | 14.85 | 16.23 | |||||||||||||||
| 50 | 100 | 104 | 95.0 | 15.65 | 17.1 | |||||||||||||||
| 60 | 120 | 124 | 115.0 | 19.54 | 21.35 | |||||||||||||||
| GEABM (MC Nylon) GEABMS (With Metal Hub Insert, MC Nylon) GEABMT (Stainless Steel with Metal Hub Insert, MC Nylon) | 2.5 | 12 | 25 | A B | 10~16 | 10 | 30 | 35 | 23.75 | 23 | 37 | 12 | 6 | M5 | P+6 | 4.39 | - | |||
| 14 | 10~17 | 10 | 35 | 40 | 28.75 | 25 | 5.77 | |||||||||||||
| 15 | 12~21 | 10, 12, 15 | 37.5 | 42.5 | 31.25 | 30 | 6.41 | |||||||||||||
| 16 | 12~22 | 40 | 45 | 33.75 | 32 | 7.09 | ||||||||||||||
| 18 | 12~26 | 10, 12, 15, 20 | 45 | 50 | 38.75 | 38 | 8.28 | |||||||||||||
| 20 | 12~28 | 50 | 55 | 43.75 | 40 | 9.59 | ||||||||||||||
| 22 | 12~30 | 12, 15, 20 | 55 | 60 | 48.75 | 44 | M6 | P+8 | 10.84 | |||||||||||
| 24 | 12~33 | 12, 15, 20, 25 | 60 | 65 | 53.75 | 48 | 12.10 | |||||||||||||
| 25 | 12~35 | 62.5 | 67.5 | 56.25 | 50 | 12.78 | ||||||||||||||
| 28 | 12~42 | 12, 15, 20, 25, 30 | 70 | 75 | 63.75 | 60 | 14.73 | |||||||||||||
| 30 | 12~45 | 75 | 80 | 68.75 | 65 | 16.02 | ||||||||||||||
| 32 | 15~49 | 15, 20, 25, 30, 35 | 80 | 85 | 73.75 | 70 | 17.40 | |||||||||||||
| 35 | 87.5 | 92.5 | 81.25 | 19.52 | ||||||||||||||||
| 36 | 90 | 95 | 83.75 | 20.27 | ||||||||||||||||
| 40 | 100 | 105 | 93.75 | 23.15 | ||||||||||||||||
| 45 | 112.5 | 117.5 | 106.25 | 26.76 | ||||||||||||||||
| 48 | 120 | 125 | 113.75 | 29.01 | ||||||||||||||||
| 50 | 125 | 130 | 118.75 | 30.57 | ||||||||||||||||
| 3.0 | 12 | 30 | A B | 12~19 | 12 | 36 | 42 | 28.5 | 28 | 45 | 15 | 7.5 | M5 | P+6 | 7.58 | - | ||||
| 14 | 12~22 | 12, 15 | 42 | 48 | 34.5 | 32 | 9.98 | |||||||||||||
| 15 | 14~25 | 45 | 51 | 37.5 | 36 | 11.08 | ||||||||||||||
| 16 | 14~26 | 12, 15, 20 | 48 | 54 | 40.5 | 38 | 12.25 | |||||||||||||
| 18 | 14~28 | 54 | 60 | 46.5 | 40 | 14.31 | ||||||||||||||
| 20 | 14~35 | 15, 20, 25 | 60 | 66 | 52.5 | 50 | M6 | P+8 | 16.56 | |||||||||||
| 22 | 14~37 | 66 | 72 | 58.5 | 54 | 18.72 | ||||||||||||||
| 24 | 14~40 | 15, 20, 25, 30 | 72 | 78 | 64.5 | 58 | 20.90 | |||||||||||||
| 25 | 14~42 | 75 | 81 | 67.5 | 60 | 22.08 | ||||||||||||||
| 28 | 14~49 | 15, 20, 25, 30, 35 | 84 | 90 | 76.5 | 70 | 25.45 | |||||||||||||
| 30 | 14~52 | 90 | 96 | 82.5 | 75 | 27.68 | ||||||||||||||
| 32 | 18~52 | 20, 25, 30, 35, 40 | 96 | 102 | 88.5 | 30.06 | ||||||||||||||
| 35 | 18~56 | 105 | 111 | 97.5 | 80 | 33.73 | ||||||||||||||
| 36 | 108 | 114 | 100.5 | 35.02 | ||||||||||||||||
| 40 | 120 | 126 | 112.5 | 40.01 | ||||||||||||||||
| 45 | 135 | 141 | 127.5 | 46.25 | ||||||||||||||||
Number of Teeth with * is not With Metal Hub Insert Type.
Alterations
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Part Number
|
|---|
| GEABMT1.5-18-15-B-[8,10] |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Number of Teeth (Teeth) | Material | Shape | Shaft Bore Dia. (Ø) | Tooth Width B (mm) | Bushings | |
|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 7 Days | - | 18 | [General Steel Material] S45C | Shape A | 8 ～ 10 | 15 | Core Rod (EN 1.4301 Equiv.) |
Loading...
Lead Time
GEABM, GEABP
GEABMS
>>Click here
[ ! ]Non-Returnable
[ ! ] A flat charge of $13.5 for 3 or more identical pieces.
GEABMT, GEABPS, GEABPT
>>Click here
[ ! ]Non-Returnable
[ ! ] A flat charge of $13.5 for 3 or more identical pieces.
GEABMS
>>Click here[ ! ]Non-Returnable
[ ! ] A flat charge of $13.5 for 3 or more identical pieces.
GEABMT, GEABPS, GEABPT
>>Click here[ ! ]Non-Returnable
[ ! ] A flat charge of $13.5 for 3 or more identical pieces.
Basic information
| Heat Treatment | Not Provided | Surface Treatment | Not Provided | Ground Tooth | Not Provided |
|---|---|---|---|---|---|
| Backlash | Provided | Bearing | Not Provided | Shaft Bore Tolerance | H7 |
| Precision(Old JIS) | JIS B 1702 (Class 5) |
Configure
Basic Attributes
-
Number of Teeth(Teeth)
-
Shape
-
Shape A -
Shape B -
Shape K
-
-
Shaft Bore Dia.(Ø)
-
Tooth Width B(mm)
-
Bushings
- Not Provided
- Core Rod (EN 1.1191 Equiv.)
- Core Rod (EN 1.4301 Equiv.)
-
Type
- GEABM
- GEABMS
- GEABMT
- GEABP
- GEABPS
- GEABPT
-
Material
- General Steel Material
- Resin
- General Steel Material
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
- 9 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Cantilever Shafts / shouldered / external thread, ring groove / spanner flat
MISUMI Shipping Days: 3 Days
-
Hinge pins / stainless steel, steel / two-sided split pin hole / incl. split pin
MISUMI Shipping Days: 3 Days
-
Rack gears / contact angle 20 degrees / dimension L standard
MISUMI Standard Price : 7.34 € Shipping Days: Same day
MISUMI Unit еxample related to this product
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.