- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 to 15:00 (CEST) 16/6/2024. We apologize for the inconvenience.
TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model (Part Numbers)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
When machining raw material, heat-treated steel, aluminium, etc., finishing standing walls for mould bottom (main mould), etc., they show their strength thanks to the positive rake angle, sharp corners of the bottom edge and strong bevel angle of 53°
-High tool rigidity minimises tool tilt during side milling.
- TS
- General Steel
- Multi-Flutes （5 ~）
- S (Short)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TSC-PSXS5
Part Number
|
|---|
| TSC-PSXS5 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Tolerance of OD (mm) | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
89.40 € | 1 | Available | 5 Days | 5 | 10 | 4 | 6 | 60 | - | Flat Surface / Side Surface / Inclined Cutting | Stocked Product | -0.020 ~ -0.038 | 1 | ● |
Loading...
Specifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Number of Flutes | Figure | |
| Outer Diameter D |
||||||
| TSC-PSXS | 1 | 2 | 60 | 6 | 4 | 1 |
| 2 | 4 | 60 | 6 | 4 | 1 | |
| 3 | 6 | 60 | 6 | 4 | 1 | |
| 4 | 8 | 60 | 6 | 4 | 1 | |
| 5 | 10 | 60 | 6 | 4 | 1 | |
| 6 | 12 | 60 | 6 | 6 | 2 | |
| 8 | 16 | 75 | 8 | 6 | 2 | |
| 10 | 20 | 80 | 10 | 6 | 2 | |
| 12 | 24 | 100 | 12 | 6 | 2 |
For Cutting Conditions, Refer to >>Click here.
More Information
● The positive finish of the rake angle, sharp edge processing of the bottom blade corners and 53° strong twist deliver strength when finishing pocket vertical wall surfaces of mold bases (holding blocks), and when machining raw materials, heat-treated steel and aluminum.
● The TS film coating with much greater oxidation resistance and hardness than conventional films exhibits excellent durability, even with raw carbon steel materials, in addition to heat-treated steel.
● The tool has a high rigidity, reducing the chances of tool breakage to a minimum when cutting side surfaces.
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Model | Highly-Helical | Coating | For High Hardness (Silicone-Based) |
|---|---|---|---|---|---|
| Geometry | Sharp Corner | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
This page is TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model, part number TSC-PSXS5.
You can find the detail information about specifications and dimensions on part number TSC-PSXS5.
Configure
Basic Attributes
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Inclined Cutting
-
Type
- SN-TSC-PSXS
- SNR-TSC-PSXS
- TSC-PSXS
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Number of Flutes(sheet)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Additional Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
Filter by standard shipping days
-
- All
- 5 Days or Less
- 7 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| TSC-PSXS12 |
| TSC-PSXS2 |
| TSC-PSXS3 |
| TSC-PSXS4 |
| TSC-PSXS6 |
| TSC-PSXS8 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Number of Flutes (sheet) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | Additional Classification | Tolerance of OD (mm) | Figure | ● Inventory Product □ Manufacturer Product |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
136.33 € | 1 | Available | 5 Days | 12 | 24 | 6 | 12 | 100 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.032 ~ -0.059 | 2 | ● | |
51.66 € | 1 | Available | 5 Days | 2 | 4 | 4 | 6 | 60 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.014 ~ -0.028 | 1 | ● | |
55.56 € | 1 | Available | 5 Days | 3 | 6 | 4 | 6 | 60 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.014 ~ -0.028 | 1 | ● | |
81.41 € | 1 | Available | 5 Days | 4 | 8 | 4 | 6 | 60 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.020 ~ -0.038 | 1 | ● | |
87.20 € | 1 | Available | 5 Days | 6 | 12 | 6 | 6 | 60 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.020 ~ -0.038 | 2 | ● | |
101.80 € | 1 | Available | 5 Days | 8 | 16 | 6 | 8 | 75 | - | Inclined Cutting / Flat Surface / Side Surface | Stocked Product | -0.025 ~ -0.045 | 2 | ● |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.