TSC series carbide roughing end mill, fine pitch / short model (Part Numbers)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
- TS
- General Steel
- 4 Flutes
- S (Short)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TSC-RFPS9
Part Number
|
|---|
| TSC-RFPS9 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Additional Classification | Tolerance of OD (mm) | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
90.16 € | 1 | Available | 5 Days | 9 | 18 | 10 | 69 | - | Stocked Product | 0 ~ -0.058 | 1 | ● |
Loading...
Specifications
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Number of Flutes | Figure | |
| Outer Diameter D |
||||||
| TSC-RFPS | 5 | 10 | 57 | 6 | 4 | 1 |
| 6 | 12 | 57 | 6 | 4 | 2 | |
| 7 | 14 | 66 | 8 | 4 | 1 | |
| 8 | 16 | 69 | 8 | 4 | 2 | |
| 9 | 18 | 69 | 10 | 4 | 1 | |
| 10 | 20 | 72 | 10 | 4 | 2 | |
| 12 | 24 | 83 | 12 | 4 | 2 | |
| 13 | 26 | 83 | 14 | 4 | 1 | |
| 14 | 26 | 83 | 14 | 4 | 2 | |
| 16 | 32 | 92 | 16 | 4 | 2 | |
| 18 | 32 | 92 | 18 | 4 | 2 | |
| 20 | 38 | 104 | 20 | 4 | 2 |
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● It adopts a fine pitch nick that delivers a finish with good surface roughness after machining.
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Roughing |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Inclined Cutting | Geometry | Ultra-Small R |
| Torsion Angle (θ) | Weak Helix (15 to 25°) |
This page is TSC series carbide roughing end mill, fine pitch / short model, part number TSC-RFPS9.
You can find the detail information about specifications and dimensions on part number TSC-RFPS9.
Configure
Basic Attributes
-
Length Under Neck (ℓ1)(mm)
-
Type
- SN-TSC-RFPS
- TSC-RFPS
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Additional Classification
- Standard Neck Relief
- Stocked Product
Filter by standard shipping days
-
- All
- 5 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| TSC-RFPS10 |
| TSC-RFPS12 |
| TSC-RFPS13 |
| TSC-RFPS14 |
| TSC-RFPS16 |
| TSC-RFPS18 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Additional Classification | Tolerance of OD (mm) | Figure | ● Inventory Product □ Manufacturer Product |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
72.80 € | 1 | Available | 5 Days | 10 | 20 | 10 | 72 | - | Stocked Product | 0 ~ -0.07 | 2 | ● | |
92.63 € | 1 | Available | 5 Days | 12 | 24 | 12 | 83 | - | Stocked Product | 0 ~ -0.07 | 2 | ● | |
126.58 € | 1 | Available | 5 Days | 13 | 26 | 14 | 83 | - | Stocked Product | 0 ~ -0.07 | 1 | ● | |
89.29 € | 1 | Available | 5 Days | 14 | 26 | 14 | 83 | - | Stocked Product | 0 ~ -0.07 | 2 | ● | |
151.13 € | 1 | Available | 5 Days | 16 | 32 | 16 | 92 | - | Stocked Product | 0 ~ -0.07 | 2 | ● | |
131.03 € | 1 | Available | 5 Days | 18 | 32 | 18 | 92 | - | Stocked Product | 0 ~ -0.084 | 2 | ● |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.