TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model
- Volume Discount
[Features]
-R of the tip is also effective in suppressing chipping
-Crescent shape with good discharge of cutting chip even with small diameter
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Due to the coating characteristics, it is suitable for high speed machining and dry machining.
-R of the tip is also effective in suppressing chipping
-Crescent shape with good discharge of cutting chip even with small diameter
-It has coating with high oxidation resistance and high hardness, and achieves long service life. Due to the coating characteristics, it is suitable for high speed machining and dry machining.
- TS
- General Steel
- 2 Flutes
- S (Short)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| TSC-SCEM0.1-30 |
| TSC-SCEM0.2-30 |
| TSC-SCEM0.3-30 |
| TSC-SCEM0.15-30 |
| TSC-SCEM0.25-30 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | R Size (mm) | |
|---|---|---|---|---|---|
41.48 € | 1 | Available | 5 Days | 0.1 | |
40.86 € | 1 | Available | 5 Days | 0.2 | |
43.32 € | 1 | Available | 5 Days | 0.3 | |
42.68 € | 1 | Available | 5 Days | 0.15 | |
44.41 € | 1 | Available | 5 Days | 0.25 |
Loading...
Specifications
| Model Number | Overall Length L | Shank Diameter d | ||
| Tip R | Double Angle θ | |||
| TSC-SCEM | 0.1 | 30° | 45 | 4 |
| 0.15 | 30° | 45 | 4 | |
| 0.2 | 30° | 45 | 4 | |
| 0.25 | 30° | 45 | 4 | |
| 0.3 | 30° | 45 | 4 |
For Cutting Conditions, Refer to >>Click here.
More Information
● The curve tip helps to prevent chipping.
● The half-moon shape yields a good chip discharge performance with a small diameter.
Basic information
| Model | Tapered Bore | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / Stainless Steel / Cast Iron / Aluminum / Copper | Number of Flutes(sheet) | 1 |
|---|---|---|---|---|---|
| Shank Diameter (d)(mm) | 4 | Overall Length (L)(mm) | 45 | Coating | For High Hardness (Silicone-Based) |
| Double Angle (θ) | 30 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.