XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Stub / Short Type (Gash Land) (XCP-GEM4B8)
- Volume Discount
Product Details:
Manufacturer part number: XCP-GEM4B8
Brand: MISUMI
Price: 60.49 €
Delivery time: 5 Days
Technical Data:
Outer Diameter (D): 8 φ
Flute Length (ℓ): 12 mm
Shank Diameter (d): 8 mm
Overall Length (L): 55 mm
Length Under Neck (ℓ1): 20 mm
(i)Remark
- See the bottom of the outline drawing tab for cutting conditions.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
XCP-GEM4B8
Outline Drawing
Cutting Conditions
Part Number
|
|---|
| XCP-GEM4B8 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Figure | Under Neck Diameter d1 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
60.49 € | 1 | Available | 5 Days | 8 | 12 | 8 | 55 | 20 | 2 | 7.7 |
Loading...
Specifications/Overview
● Gash land blade tip suppresses chipping to the greatest extent possible.
● Available in various blade lengths.
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / High-Hardness Steel – HRC65 / Stainless Steel / Cast Iron | Number of Flutes(sheet) | 4 | Model | Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting | Geometry | With Lead |
| Torsion Angle (θ) | Standard Helix (30 to 40°) | Tolerance of OD(mm) | -0.02 to 0 | ● Inventory Product □ Manufacturer Product | ● |
This page is XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Stub / Short Type (Gash Land), part number XCP-GEM4B8.
You can find the detail information about specifications and dimensions on part number XCP-GEM4B8.
Configure
Basic Attributes
-
Type
- XCP-GEM4B
- XCP-GEM4S
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| XCP-GEM4B4 |
| XCP-GEM4B4-N-4 |
| XCP-GEM4B5 |
| XCP-GEM4B8-N |
| XCP-GEM4S1 |
| XCP-GEM4S1.5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Figure | Under Neck Diameter d1 (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
32.73 € | 1 | Available | 5 Days | 4 | 6 | 6 | 45 | 10 | 1 | 3.75 | |
26.60 € | 1 | Available | 5 Days | 4 | 6 | 4 | 50 | - | 3 | N | |
32.79 € | 1 | Available | 5 Days | 5 | 7.5 | 6 | 45 | 12 | 1 | 4.75 | |
44.53 € | 1 | Available | 5 Days | 8 | 12 | 8 | 60 | - | 3 | N | |
25.32 € | 1 | Available | 5 Days | 1 | 2 | 4 | 40 | - | 1 | - | |
28.17 € | 1 | Available | 5 Days | 1.5 | 3 | 4 | 40 | - | 1 | - |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.