TSC Series Carbide Uneven Lead 4-Flute Square End Mill (TSC-VHEM4S3)
- Volume Discount
Product Details:
Manufacturer part number: TSC-VHEM4S3
Brand: MISUMI
Price: 37.65 €
Delivery time: 5 Days
Technical Data:
Outer Diameter (D): 3 φ
Flute Length (ℓ): 6 mm
Shank Diameter (d): 6 mm
Overall Length (L): 50 mm
Figure: 1
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TSC-VHEM4S3
Part Number
|
|---|
| TSC-VHEM4S3 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Figure | |
|---|---|---|---|---|---|---|---|---|---|
37.65 € | 1 | Available | 5 Days | 3 | 6 | 6 | 50 | 1 |
Loading...
Specifications
Model Number
TSC-VHEM4S
| Model Number | Flute Length ℓ | Overall Length L | Shank Diameter d | Figure | |
| Flute Diameter D | |||||
| TSC-VHEM4S | 2 | 4 | 50 | 6 | 1 |
| 2.5 | 5 | 50 | 6 | 1 | |
| 3 | 6 | 50 | 6 | 1 | |
| 3.5 | 7 | 50 | 6 | 1 | |
| 4 | 8 | 50 | 6 | 1 | |
| 5 | 10 | 50 | 6 | 1 | |
| 6 | 12 | 50 | 6 | 2 | |
| 7 | 14 | 60 | 8 | 1 | |
| 8 | 16 | 60 | 8 | 2 | |
| 9 | 18 | 70 | 10 | 1 | |
| 10 | 20 | 70 | 10 | 2 | |
| 11 | 22 | 75 | 12 | 1 | |
| 12 | 24 | 75 | 12 | 2 | |
| 13 | 26 | 75 | 12 | 3 | |
| 14 | 28 | 75 | 12 | 3 | |
| 15 | 30 | 100 | 16 | 1 | |
| 16 | 32 | 100 | 16 | 2 | |
| 18 | 36 | 100 | 16 | 3 | |
| 20 | 40 | 105 | 20 | 2 | |
| 25 | 50 | 120 | 25 | 2 |
More Information
● Suppressing the chattering, stable cutting is achieved even when machining difficult-to-cut materials.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.
[ ! ]The electrical conductivity is minimal.
Basic information
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Titanium Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Groove | Geometry | With Lead |
| Torsion Angle (θ) | Uneven Lead | Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
| ● Inventory Product □ Manufacturer Product | ● |
This page is TSC Series Carbide Uneven Lead 4-Flute Square End Mill, part number TSC-VHEM4S3.
You can find the detail information about specifications and dimensions on part number TSC-VHEM4S3.
Configure
Basic Attributes
-
Type
- TSC-VHEM4S
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| TSC-VHEM4S13 |
| TSC-VHEM4S14 |
| TSC-VHEM4S15 |
| TSC-VHEM4S3.5 |
| TSC-VHEM4S4 |
| TSC-VHEM4S5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Figure |
|---|---|---|---|---|---|---|---|---|---|
96.87 € | 1 | Available | 5 Days | 13 | 26 | 12 | 75 | 3 | |
112.81 € | 1 | Available | 5 Days | 14 | 28 | 12 | 75 | 3 | |
132.30 € | 1 | Available | 5 Days | 15 | 30 | 16 | 100 | 1 | |
37.65 € | 1 | Available | 5 Days | 3.5 | 7 | 6 | 50 | 1 | |
40.85 € | 1 | Available | 5 Days | 4 | 8 | 6 | 50 | 1 | |
47.64 € | 1 | Available | 5 Days | 5 | 10 | 6 | 50 | 1 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.