Outside Gasket Handle A-463
[Features]
· 3 point tightening mechanism developed for the outside system.
· No caulking, etc. required on the mounting part for attaching the handle to the outside of the packing.
· Large stroke can be obtained with a slim body.
· Upper and lower rod ends use plastic rollers, and the operation is smooth.
· For rod seat, recommended hinge B-71-3 is compatible with installation.
· Therefore, we do not choose right or left side use of the door (panel cut is also vertically symmetrical). Even if the size of the housing changes, it is not necessary to change the length of the rod.
· Small and slim pin tumbler lock with high security is used.
· Left/right combination type (exchange left and right by turning over the control center)
· 3 point tightening mechanism developed for the outside system.
· No caulking, etc. required on the mounting part for attaching the handle to the outside of the packing.
· Large stroke can be obtained with a slim body.
· Upper and lower rod ends use plastic rollers, and the operation is smooth.
· For rod seat, recommended hinge B-71-3 is compatible with installation.
· Therefore, we do not choose right or left side use of the door (panel cut is also vertically symmetrical). Even if the size of the housing changes, it is not necessary to change the length of the rod.
· Small and slim pin tumbler lock with high security is used.
· Left/right combination type (exchange left and right by turning over the control center)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
A-463
Basic information
| Material | Zinc Alloy | Finish | Satin Nickel Plating | Compatible Plate Thickness(mm) | 2.3 |
|---|---|---|---|---|---|
| Accessory | Clasp | Overall Length(mm) | 155 | Overall Width(mm) | 29 |
| Full height(mm) | 24.7 | Product Code | 03303 |
This page is Outside Gasket Handle A-463, part number A-463.
You can find the detail information about specifications and dimensions on part number A-463.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.