Ring for Personal Coin Lock C-288-Y
[Features]
· Due to the strengthening of the cylinder cap by tempering, it is protected from any damage from drilling, etc.
· Bias cut specification for key (pin groove processing of key corner) that is difficult to duplicate.
· Multiple key combinations with 10 pin 135° arrangement.
· Smooth reversible key structure.
· Since the key will leave the lock only at the time of locking, there is no forgetting to lock
· Due to the strengthening of the cylinder cap by tempering, it is protected from any damage from drilling, etc.
· Bias cut specification for key (pin groove processing of key corner) that is difficult to duplicate.
· Multiple key combinations with 10 pin 135° arrangement.
· Smooth reversible key structure.
· Since the key will leave the lock only at the time of locking, there is no forgetting to lock
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
C-288-OP-2
Basic information
| Type | Ring | Main Body Overall Length(L(mm)) | 30 | Main Body Width(W(mm)) | 30 |
|---|---|---|---|---|---|
| Thickness(H(mm)) | 6 | Main Body Material | Free-Cutting Brass Bar | Surface Finish | Chrome Plating |
This page is Ring for Personal Coin Lock C-288-Y, part number C-288-OP-2.
You can find the detail information about specifications and dimensions on part number C-288-OP-2.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.