Stainless Steel-Knurled screws with recessed stud for loss prevention (Part Numbers - CAD Download)
- Volume Discount
When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
653.2-M4-21-NI
Basic information
| Material | Stainless Steel |
|---|
This page is Stainless Steel-Knurled screws with recessed stud for loss prevention, part number 653.2-M4-21-NI.
You can find the detail information about specifications and dimensions on part number 653.2-M4-21-NI.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| 653.2-M4-15-NI |
| 653.2-M4-17-NI |
| 653.2-M4-19-NI |
| 653.2-M5-18-NI |
| 653.2-M5-20-NI |
| 653.2-M5-22-NI |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Length l (mm) | Thread d1 |
|---|---|---|---|---|---|---|
4.72 € | 1 | Available |
Same day
Stock | 15 | M 4 | |
4.60 € | 1 | Available |
Same day
Stock | 17 | M 4 | |
4.70 € | 1 | Available |
Same day
Stock | 19 | M 4 | |
5.34 € | 1 | Available |
Same day
Stock | 18 | M 5 | |
5.94 € | 1 | Available | 4 Days | 20 | M 5 | |
6.02 € | 1 | Available | 4 Days | 22 | M 5 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.