Center Reamer (Taper Shank) (CR-MT-90-50)
Product Details:
Manufacturer part number: CR-MT-90-50
Brand: FUKUDA
Price: 319.07 €
Delivery time: 6 Days
Technical Data:
Tip angle (θ): 90
Number of flutes: 9 sheet
Overall Length (L): 130 mm
Shank diameter (d): MT2
Tip diameter: 7
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
CR-MT-90-50
Part Number
|
|---|
| CR-MT-90-50 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Tip angle (θ) | Number of flutes (sheet) | Overall Length (L) (mm) | Shank diameter (d) | Tip diameter | Blade length (ℓ) | Outer Diameter (D) | Outer Diameter Length (ℓ1) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
319.07 € | 1 | 6 Days | 90 | 9 | 130 | MT2 | 7 | 21.5 | 50 | 16.5 |
Loading...
Basic information
| Application | Hole Chamfer | work material | General Steel / Cast Iron / Aluminum / Resin | Single blade, two blades | Single blade |
|---|---|---|---|---|---|
| Peripheral Blade Y/N | N/A | Tool Material Type | High-speed steel (SKH51) | Coating Y/N | N/A |
| Coating Type | Non-Coated | shank | MT | Large diameter tolerance | +0.3～+0.5 |
| Angle Tolerance(Minute) | ±15' |
This page is Center Reamer (Taper Shank), part number CR-MT-90-50.
You can find the detail information about specifications and dimensions on part number CR-MT-90-50.
Configure
Basic Attributes
-
Type
- CR-MT
-
Tip angle (θ)
-
Number of flutes(sheet)
- 9
- 11
- 13
- 15
-
Overall Length (L)(mm)
-
Shank diameter (d)
-
Tip diameter
-
Blade length (ℓ)
-
Outer Diameter (D)
-
Outer Diameter Length (ℓ1)
Filter by standard shipping days
-
- All
- 6 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| CR-MT-60-50 |
| CR-MT-60-60 |
| CR-MT-60-80 |
| CR-MT-90-100 |
| CR-MT-90-60 |
| CR-MT-90-80 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Tip angle (θ) | Number of flutes (sheet) | Overall Length (L) (mm) | Shank diameter (d) | Tip diameter | Blade length (ℓ) | Outer Diameter (D) | Outer Diameter Length (ℓ1) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
358.09 € | 1 | 6 Days | 60 | 9 | 145 | MT2 | 7 | 37.2 | 50 | 15.8 | ||
496.60 € | 1 | 6 Days | 60 | 11 | 155 | MT2 | 10 | 43.3 | 60 | 16.7 | ||
994.55 € | 1 | 6 Days | 60 | 13 | 193 | MT3 | 10 | 60.6 | 80 | 18.4 | ||
1,353.06 € | 1 | 6 Days | 90 | 15 | 183 | MT3 | 10 | 45 | 100 | 24 | ||
476.29 € | 1 | 6 Days | 90 | 11 | 136.5 | MT2 | 10 | 25 | 60 | 16.5 | ||
835.52 € | 1 | 6 Days | 90 | 13 | 168 | MT3 | 10 | 35 | 80 | 19 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.