Magne Welder for Welding, Holding Force (N): 660, Weight (g): 2750
[Features]
· Convenient as it has double suction surfaces and the magnets can be switched on and off with the on/off switch on both ends.
· Stable retention of parts to be joined together when welding iron plate or iron balls.
· Used for tacking or provisional assembly in welding, assembly work, etc.
[Applications]
· For tacking and temporary assembly during welding work and assembly work.
· Convenient as it has double suction surfaces and the magnets can be switched on and off with the on/off switch on both ends.
· Stable retention of parts to be joined together when welding iron plate or iron balls.
· Used for tacking or provisional assembly in welding, assembly work, etc.
[Applications]
· For tacking and temporary assembly during welding work and assembly work.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TMS2-90
Basic information
| Holding Angle(°) | 90 | Magnet ON/OFF Function | Available | Adsorption Power(N) | 660 |
|---|---|---|---|---|---|
| Width(mm) | 195 | Depth(mm) | 45 | Height(mm) | 195 |
| Specifications | Fixed Type | Application | For temporary holding and temporary assembly during welding work. | Trusco Code | 284-8911 |
| Mass(g) | 2750 | Magnet Material | Neodymium Magnet | Exterior Part Material | Steel / Aluminum Alloy |
This page is Magne Welder for Welding, Holding Force (N): 660, Weight (g): 2750, part number TMS2-90.
You can find the detail information about specifications and dimensions on part number TMS2-90.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.