Cutting Wheel For Disc Grinder
[Features]
· For cutting stainless steel, iron and other metals. Safety design maximum use rpm is 14.5 min-1.
· Special abrasive grain coating greatly increases durability.
· Sharp cut with no burrs at 1‑mm thickness.
· Material does not scorch during high speed cutting.
· Stainless steel also cuts cleanly.
· For cutting stainless steel, iron and other metals. Safety design maximum use rpm is 14.5 min-1.
· Special abrasive grain coating greatly increases durability.
· Sharp cut with no burrs at 1‑mm thickness.
· Material does not scorch during high speed cutting.
· Stainless steel also cuts cleanly.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
MCD10510P/10
Basic information
| Product Type | Flat | Work material | Stainless Steel / Cast Iron | Outer Diameter(mm) | 105 |
|---|---|---|---|---|---|
| Blade thickness(mm) | 1 | Internal Diameter(mm) | 15 | Max. Rotational Speed(min−1) | 14500 |
| Features | Special coating abrasive vastly improves durability / 1.0 mm thickness enables sharp cutting without burr / Material does not get burned with high-speed cutting, stainless steel can also be cleanly cut |
This page is Cutting Wheel For Disc Grinder, part number MCD10510P/10.
You can find the detail information about specifications and dimensions on part number MCD10510P/10.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.