Ion Parts Cleaner IPC-A4
* Compact bench-top type of 314 mm wide and 253 mm deep.
* Eliminates static electricity and removes dust with air controlled by an infrared sensor.
* Time to stop ion blow after sensing a workpiece by a sensor is settable. (1, 3, 5, 10, or 30 sec)
* Adhesive gel collects blown-off dust assuredly.
* Dust on the adhesive gel mat can be washed off with water and the gel mat can be used repeatedly.
* Dust collector is not required; This reduces power consumption significantly and, in the end, the total running cost. Moreover, pulse blow also cuts the amount of air usage.
* In the pulse mode, air is blown intermittently, exerting force of blowing off dust by vibration. It allows low- and high-speed pulses to be selected according to workpiece.
* Incorporates an air regulator.
* Eliminates static electricity and removes dust with air controlled by an infrared sensor.
* Time to stop ion blow after sensing a workpiece by a sensor is settable. (1, 3, 5, 10, or 30 sec)
* Adhesive gel collects blown-off dust assuredly.
* Dust on the adhesive gel mat can be washed off with water and the gel mat can be used repeatedly.
* Dust collector is not required; This reduces power consumption significantly and, in the end, the total running cost. Moreover, pulse blow also cuts the amount of air usage.
* In the pulse mode, air is blown intermittently, exerting force of blowing off dust by vibration. It allows low- and high-speed pulses to be selected according to workpiece.
* Incorporates an air regulator.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
IPC-A4
Basic information
| Product Type | Unit Type | Type | AC System | Power Supply(V) | DC24 ±5%、AC100 |
|---|---|---|---|---|---|
| Width(mm) | 314 | Depth(mm) | 253 | Height(mm) | 361 |
| Power Consumption(W) | 17 | Operating Air Pressure(MPa) | 0.1–0.3 | Trusco Code | 375-5801 |
| Power supply | DC24 ±5%、AC100 | Mass(g) | 6000 | Static Charge Elimination Method | AC High-Frequency Corona Discharge Type |
| Accessory 1 | Power Adapter (100 to 240 VAC) | Accessory 2 | Slide fitting, Screwdriver for needle electrode replacement | Specifications | With Dust Removal Timer (Adjustment Range: 1 to 30 Seconds, 5 Steps) Energy Saving Design with 17 W of Energy Consumption |
| Box | Steel, Hardened Polyvinyl Chlorine Board | Plate | Stainless Steel | Adhesive Sheet | Polyurethane |
| Amount Of Content | 1 unit |
This page is Ion Parts Cleaner IPC-A4, part number IPC-A4.
You can find the detail information about specifications and dimensions on part number IPC-A4.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.