Holder 1 x D HT800WP 4105
· Can be used for both hole drilling up to 1 X D and chamfering at the same time.
· Suitable for deep pilot hole machining.
· Internal oil supply type.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| 4105-11.000 |
| 4105-12.000 |
| 4105-13.000 |
| 4105-14.000 |
| 4105-16.000 |
| 4105-18.000 |
| 4105-20.000 |
| 4105-22.000 |
| 4105-24.000 |
| 4105-26.000 |
| 4105-28.000 |
| 4105-30.000 |
| 4105-32.000 |
| 4105-36.000 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Overall Length L1 (mm) | shank diameter d2 (mm) | Shank length l3 (mm) | Holder Size (mm) | Compatible tip diameter d1 (mm) | Maximum diameter of chamfer d3 (mm) | Maximum step length l2 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
311.80 € | 1 | 25 Days | 81 | 12 | 45 | 110 | 11.00-11.99 | 17.0 | 12.0 | ||
311.80 € | 1 | 25 Days | 84 | 12 | 45 | 120 | 12.00-12.99 | 18.0 | 13.0 | ||
311.80 € | 1 | 25 Days | 86 | 14 | 45 | 130 | 13.00-13.99 | 18.0 | 14.0 | ||
326.91 € | 1 | 25 Days | 93 | 16 | 48 | 140 | 14.00-15.99 | 18.0 | 16.0 | ||
385.45 € | 1 | 25 Days | 99 | 18 | 48 | 160 | 16.00-17.99 | 20.0 | 18.0 | ||
406.34 € | 1 | 25 Days | 106 | 20 | 50 | 180 | 18.00-19.99 | 22.0 | 20.0 | ||
406.34 € | 1 | 25 Days | 117 | 25 | 56 | 200 | 20.00-21.99 | 24.0 | 22.0 | ||
441.00 € | 1 | 25 Days | 122 | 25 | 56 | 220 | 22.00-23.99 | 26.0 | 24.0 | ||
488.33 € | 1 | 25 Days | 128 | 25 | 56 | 240 | 24.00-25.99 | 28.0 | 26.0 | ||
488.33 € | 1 | 25 Days | 142 | 32 | 60 | 260 | 26.00-27.99 | 32.0 | 28.0 | ||
539.70 € | 1 | 25 Days | 147 | 32 | 60 | 280 | 28.00-29.99 | 34.0 | 30.0 | ||
598.04 € | 1 | 25 Days | 152 | 32 | 60 | 300 | 30.00-31.99 | 38.0 | 32.0 | ||
631.45 € | 1 | 25 Days | 163 | 32 | 60 | 320 | 32.00-35.99 | 42.0 | 36.0 | ||
750.84 € | 1 | 25 Days | 173 | 32 | 60 | 360 | 36.00-40.00 | 46.0 | 40.0 |
Loading...
Basic information
| work material | General Steel / High Hardness Steel / Stainless Steel / Cast Iron / Aluminum / Copper / Resin | Coating Y/N | N/A | With/without Oil Hole | Available |
|---|---|---|---|---|---|
| Internal oil supply | Available | Shank diameter tolerance | h6 |
Configure
Basic Attributes
-
Overall Length L1(mm)
-
shank diameter d2(mm)
-
Shank length l3(mm)
- 45
- 48
- 50
- 56
- 60
-
Holder Size(mm)
-
Compatible tip diameter d1(mm)
-
Maximum diameter of chamfer d3(mm)
-
Maximum step length l2(mm)
-
Type
- 4105
Filter by standard shipping days
-
- All
- 25 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.