• 10 million products
  • Same-day shipment for 30.000 stock items
  • Competitive prices

Our business hours are 08:00 to 17:00 (Mon-Thu) / 08:00 to 16:00 (Fri). (GMT+1)

Search by category
or manufacturer

Category search
Automation Components
Fasteners
Materials
Wiring Components
Electrical & Controls
Cutting Tools
Processing Tools
Material Handling & Storage
Safety & General Supplies
Lab & Clean Room Supplies
Press Die Components
Plastic Mold Components

Manufacturer search
Manufacturer list

Hanging Clamp

  • Data to be displayed
    30
    45
    60
  • Sort
Shipping Days
  • ALL
  • 3 Days or Less
  • Omnidirectional Screw Type Clamp

    Omnidirectional Screw Type Clamp

    EAGLE CLAMP

    [Feature] - Lifting/hanging/pulling operations in all directions can be done freely by the spherical jaw that changes the pulling force to sandwiching force in all directions. - The tightening status of the screw can be checked at a glance with the tightening check line. - The tightening efficiency was improved by using a newly developed swivel pad type tightening screw. - The utility is further enhanced by a 'twin shackle' that has a shackle mounting section in 2 locations. [Application] - For lifting, hanging, reversing, pulling, as a substitute for a lifting piece, or for installing chain hoists.

    Starting from
    291.92€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Clamp for Lifting Concrete Products (L Blocks, Curbstones, Slope Protection Mold Blocks)

    Clamp for Lifting Concrete Products (L Blocks, Curbstones, Slope Protection Mold Blocks)

    EAGLE CLAMP

    8-step opening adjustment is possible by replacing the opening adjustment pin. Due to the use of urethane rubber, lifting and transportation can be done without causing damage. For L-shaped blocks for concrete products, curbs and slope blocks.

    Starting from
    264.00€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Drum Lifter

    Drum Lifter

    ZOJIRUSHI

    [Feature] - A compact and lightweight lifting tool especially for drums, it can be also used both for drums with or without lids. [Application] - Drum lifting operations.

    Starting from
    111.50€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Clamps Only for Vertical Lifting (with Safety Lock)

    Clamps Only for Vertical Lifting (with Safety Lock)

    JAPAN CLAMP

    [Feature] - Flipping operations are also possible. - Can also be used for pulling out lightweight steel sheet pile (short items). [Application] - Vertical lifting of steel plate / shaped steel, etc.

    Starting from
    328.75€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Clamp for Lifting Secondary Concrete Products (Hand / Machine Dual Purpose)

    Clamp for Lifting Secondary Concrete Products (Hand / Machine Dual Purpose)

    EAGLE CLAMP

    A single person can perform the removal and fitting of groove lid. Model combining hand lifting and machine lifting. U-shaped groove, lid, transportation of curbs and concrete blocks, stacked drop-off, laying, construction operation.

    Starting from
    400.33€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • U-shaped Lifting Clamp

    U-shaped Lifting Clamp [2 Pieces Per Package]

    JAPAN CLAMP

    [Feature] -With a large effective usable size, it is ideal for lifting of reinforced concrete, long U-shaped and L-shaped items. - Since the clamp arm is opened by a stopper structure when the device is in a no-load state, it is extremely convenient in that a single person can set 2 machines simultaneously - Slinging operations can be performed by a single person thanks to a mechanism in which the lifting posture is maintained by spring lock mechanized teeth that automatically bite into concrete when the stopper is pulled after clamp attachment. - The clamp arm automatically locks in a an "OPEN" state by pressing the upper hinge plate from above during removal. [Application] - For lifting U-shaped grooved beams.

    Starting from
    409.83€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Vertical Lifting Clamp (with Safety Lock)

    Vertical Lifting Clamp (with Safety Lock)

    ZOJIRUSHI

    [Feature] - Provided with a safety lock that securely maintains a locked state even if the suspended load lands and becomes loose. - A standard type with a wide range of uses that is convenient for horizontal suspension and flipping operations. [Application] For transporting iron plates and shape steel.

    Starting from
    214.67€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Screw Type Clamp WF

    Screw Type Clamp WF

    ZOJIRUSHI

    [Feature] - Features a circular double cam lock structure that enables work to be performed safely by thanks to the strong tightening force it generates. - Multi-directional operation is possible thanks to its 2 lifting holes. - Can be also used for lifting of I-beams, etc., that are sloped. - Lightest screw clamp in the industry. [Application] - For lifting and transportation tasks. - Piece for hanging of electric chain hoists, manual hoists, pulleys, etc. - Drawing operations for insole steel plates or structures.

    Starting from
    150.92€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Hanging Clamp for Drum Container

    Hanging Clamp for Drum Container

    JAPAN CLAMP

    [Feature] - Lashes drums with a single touch. - Developed specially for standard drums (φ 570 mm). [Application] - For drum suspension work.

    Starting from
    303.75€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Hanging Clamp for Drum Container

    Hanging Clamp for Drum Container

    JAPAN CLAMP

    [Feature] - Lashes drums with a single touch. For combined use of sealed drums/open drums (drums with lids). [Application] - For drum suspension work.

    Starting from
    493.50€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Horizontal Lifting Clamp (with Safety Lock)

    Horizontal Lifting Clamp (with Safety Lock)

    JAPAN CLAMP

    [Feature] - Abundant applications for lifting of not only flat sheets, but also shaped steel, etc. - Can also be used to flip over beams, etc. [Application] - Erection and transportation work of H-shape steel, such as steel beams and frames.

    Starting from
    305.83€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Vertical Lifting Clamp (with Latch-Type Locking Device)

    Vertical Lifting Clamp (with Latch-Type Locking Device)

    EAGLE CLAMP

    [Feature] - Being compact and lightweight, the locking device is easy to use and is of a reliable latch type. [Application] - Vertical lifting of steel / shaped steel, etc.

    Starting from
    300.50€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Horizontal Lifting Clamp EASY-S Model

    Horizontal Lifting Clamp EASY-S Model

    MIKI NETSUREN

    Dedicated to lifting angles/channels/I-beams and their structural materials, it is an easy clamp that guarantees a high efficiency lifting work. The S-type has a torsion coil spring mounted on the cam shaft, and attaching the clamp does not require supporting by hand. Dedicated to lifting of angles/channels/I-beams and their structural materials.

    Starting from
    120.42€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Vertical Lifting Clamp (Manual Locking Type)

    Vertical Lifting Clamp (Manual Locking Type)

    MIKI NETSUREN

    Has the structure that bites with increasingly strong force as the lifting load increases. By applying manual lock, normally if the load becomes zero by the action of a certain amount of initial load, the clamp will never deviate from the member. Vertical lifting operations for steel and shaped steel, etc.

    Starting from
    244.92€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Drum Lifting Clamp (for JIS Z1601 Drums)

    Drum Lifting Clamp (for JIS Z1601 Drums)

    MIKI NETSUREN

    Specialized JIS Z1601 drums. With the lock released, it is possible to automatically clamp the drum by arranging the cam on the outer peripheral surface of the drum (rib), opening the clamp by the lever, and lifting the clamp, . Drums can be removed automatically by lifting the clamp once drums make contact with the drum and are in a no-load state . For drum suspension work.

    Starting from
    396.75€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Simple Clamp Exclusively for Vertically Lifting Shaped-steel (Can be Used for Hoisting Operations)

    Simple Clamp Exclusively for Vertically Lifting Shaped-steel (Can be Used for Hoisting Operations)

    JAPAN CLAMP

    [Feature] - Ideal for moving, reversing or unloading of H-shaped steel and I-shaped steel, as well as lifting and stacking of I-beams and structural materials. - Reverse unloading work in which materials are subjected to strong impact is also possible. [Application] - Various types of steel such as H-shaped steel/I-shaped steel/angle steel etc.

    Starting from
    350.50€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • U-shaped Lifting Clamp CU-M Type (Machine Type)

    U-shaped Lifting Clamp CU-M Type (Machine Type)

    MIKI NETSUREN

    The Neturen U-grooved suspension clamp is durable, lightweight, easy to work with, and is given the highest emphasis on the safety. For Laying Work Such as by Cranes in Construction of U-Grooves and Flumes, Etc.

    Starting from
    110.42€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Vertical Lifting Clamp V-25-N Model (One-Touch Safety Locking Type)

    Vertical Lifting Clamp V-25-N Model (One-Touch Safety Locking Type)

    MIKI NETSUREN

    Has the structure that bites with increasingly strong force as the lifting load increases. With one-touch operation of 'Push, Pull' for the hanging ring, the cam can be closed or locked in an open state. With a compression coil spring, normally if the load becomes zero by the action of a certain amount of initial load, the clamp will never deviate from the member.

    Starting from
    237.50€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Screw Clamp HP-Y Type (for Pulling)

    Screw Clamp HP-Y Type (for Pulling)

    MIKI NETSUREN

    A unique mechanism was adopted for preventing deformation of the tension member, and the problem has been completely eliminated. Can be also used for lifting operations (hanging angle 60°). Can be used for multiple purposes with lateral lifting, pulling and other operation applications of members by the combined use of such as chain block and lever block, etc.

    Starting from
    219.67€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Horizontal Lifting Clamp (with Latch-type Locking Device)

    Horizontal Lifting Clamp (with Latch-type Locking Device)

    EAGLE CLAMP

    [Feature] - Features a light weight, compact size, and handles that make it easy to use. - Operational efficiency is also improved through the use of large suspending rings. - Spring-type tightening mechanism. [Application] - Horizontal suspension of shaped steel (H-shaped steel, I-shaped steel, channel steel), steel frames, bridges, steel structural materials, steel plates and steel beams, etc.

    Starting from
    323.08€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Horizontal Lifting Clamp (for Horizontally Lifting Laminate Boards)

    Horizontal Lifting Clamp (for Horizontally Lifting Laminate Boards)

    EAGLE CLAMP

    [Feature] - Convenient clamp for horizontal suspension of thin sheets. - Also useful for curved thin sheets. [Application] - Horizontal suspension of thin sheets.

    Starting from
    239.58€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • U-shaped Lifting Clamp CU-H Type (Handy Type with Grip)

    U-shaped Lifting Clamp CU-H Type (Handy Type with Grip)

    MIKI NETSUREN

    The Neturen U-grooved suspension clamp is durable, lightweight, easy to work with, and is given the highest emphasis on the safety. Can also be used as non-damaging type. In laying work such as by cranes in construction of U-grooves and flumes, etc. In laying work such as by cranes, etc.

    Starting from
    109.33€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Drum Lifting Clamp (for JIS Z1601 Drums)

    Drum Lifting Clamp (for JIS Z1601 Drums)

    MIKI NETSUREN

    Specialized JIS Z1601 drums. One-touch lifting is possible by mounting so that the cam touches the outer peripheral surface of the drum. Vertical lifting/horizontal lifting/reversing are possible. For drum suspension work.

    Starting from
    229.25€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Omnidirectional Screw Type Clamp

    Omnidirectional Screw Type Clamp

    EAGLE CLAMP

    [Feature] - Lifting/hanging/pulling operations in all directions can be done freely by the spherical jaw that changes the pulling force to sandwiching force in all directions. - The tightening status of the screw can be checked at a glance with the tightening check line. - Slim design permits work even in narrow spaces. [Application] - Lifting, reversing and pulling of steel plate/shape steel/flat steel/steel beams/steel frames/bridges, etc.

    Starting from
    411.67€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Horizontal Lifting ・ Vertical Lifting Combined Clamp

    Horizontal Lifting ・ Vertical Lifting Combined Clamp

    JAPAN CLAMP

    [Feature] - Flipping operations, as well as horizontal suspension can be performed simultaneously. - Featuring significantly enhanced capacity. (Features a Size that is Almost Unchanged in Comparison to Conventional Horizontal Lifting Clamps, but with a 50% Increased Horizontal Lifting Capacity) [Application] - Horizontal suspension / vertical suspension combined. - Erection and transportation of H-shape steel, etc.

    Starting from
    355.50€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Screw Type Multi-purpose Clamp

    Screw Type Multi-purpose Clamp

    JAPAN CLAMP

    [Feature] - Universal type capable of vertical lifting, horizontal lifting and horizontal pulling. - With an automatic clamping structure, it is extremely effective for lifting of materials with sloping surfaces, such as I-shape steel etc. - Includes a hex head at the end of the screw for use with ratchet spanners. [Application] - For lifting, pulling and fixing pieces of steel material.

    Starting from
    303.50€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Horizontal Lifting Clamp (with Latch-type Locking Device)

    Horizontal Lifting Clamp (with Latch-type Locking Device)

    EAGLE CLAMP

    [Feature] - Clamp suitable for lifting or turning over shaped steel. - Can be used also for items such as I-shapes steel having a small front surface. [Application] - Horizontal lifting of shaped steel (angle steel, channel steel, I-shaped steel, H-shaped steel), steel frames, bridges, steel structural materials and steel plates, etc.

    Starting from
    329.17€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Horizontal Lifting Clamp (with Safety Lock)

    Horizontal Lifting Clamp (with Safety Lock)

    ZOJIRUSHI

    [Feature] - Clamp for lifting and horizontal lifting of H-shaped steel, I-shaped steel, T-shaped steel and L-shaped steel, etc. - Raising or horizontal movement is convenient, and there is no risk of detachment even if cargo becomes vertical position when raising. [Application] - For transporting iron plates and shape steel.

    Starting from
    200.58€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Horizontal Lifting Clamp (with Lock Springs)

    Horizontal Lifting Clamp (with Lock Springs)

    JAPAN CLAMP

    [Feature] - A lightweight/compact clamp especially for horizontal lifting. - Erection work can be done easily. - A clamp provided with a lock spring that does not detach even when there is no load. [Application] - For erection and transportation of shaped steel.

    Starting from
    206.25€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Vertical Lifting ・ Horizontal Lifting Combined Clamp HV-G Model (Manual Locking Type)

    Vertical Lifting ・ Horizontal Lifting Combined Clamp HV-G Model (Manual Locking Type)

    MIKI NETSUREN

    Perfect for lifting/reversing work of such as I-shaped, T-shaped, angled and channeled structures. Perfect for lifting items with short face widths.

    Starting from
    245.83€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

  • Horizontal Lifting Clamp

    Horizontal Lifting Clamp [2 Pieces Per Package]

    JAPAN CLAMP

    [Feature] - A clamp useful for the lifting and transfer of steel plates that incorporates the safety of a clamp with the convenience of conventional "Hakka" models. - Since the tip of the clamp is of a wedge shape, insertion of suspended loads is easy. [Application] - For horizontal movement of insole iron plates. - Especially for horizontal suspension of iron plates.

    Starting from
    354.00€
    Min. Shipping Days
    3 Days

    *Unit price with basic configuration

Configure

Reset

Narrow search by specifying spec./dim.

Narrow search by specifying manufacturer

Brand

MISUMI Public Circulation Product Business

Narrow search by specifying CAD data type

  • 2D
  • 3D

Select Image

Close