Square HSS End Mills
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
End Mill (Multi-Flute Center-Cutting Long Type), CC-EML
OSG
4-cutter end mill with centre cut in long design using cobalt high-speed steel as base material. Suitable for deep cuts.- Volume Discount
› Configure nowStarting from∗ ： 19.92 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Roughing Long Type, EX-REEL
OSG
Long general purpose roughing cutter made of cobalt high-speed steel as base material for heavy cuts. Suitable for deep cuts.- Volume Discount
› Configure nowStarting from∗ ： 48.86 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
αFS α Flat Nick Roughing Short Blade
SANKO MFG
A flat nick type roughing end mill. Semi-finishing is possible.- Volume Discount
› Configure nowStarting from∗ ： 50.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute General Use, Long
OSG
Universal 2-flute milling cutter in long design using cobalt high-speed steel as base material. Suitable for deep cuts.- Volume Discount
› Configure nowStarting from∗ ： 18.22 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
XPM End Mill (4-Flute Deep-Carving Short Type), DE-XPM-EMS
OSG
Long shank form end mill with 4 blades for deep engraving. Set with a shank radius thinner than the blade bore.- Volume Discount
› Configure nowStarting from∗ ： 33.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular
MISUMI
[Features]
-High-speed steel square cutter with 2 cutting edges and regular cutting edge length, where the cutting diameter can be specified in 0.01 mm steps
-Can be reground. Please refer to the "Regrinding service" page for information on application procedures, range of services, prices, etc.- Non-Coated
- 2 Flutes
- R (Regular)
› Configure nowMin. Shipping Days ： 7 Days -
High-Speed Steel Corner C End Mill, 2-Flute / Regular Model
MISUMI
[Features]
-High speed steel cutter with 2 cutting edges and corner chamfer with selectable corner chamfer in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Non-Coated
- 2 Flutes
- R (Regular)
› Configure nowMin. Shipping Days ： 7 Days -
Super Hard, 4-Flute 4SE
NACHI(FUJIKOSHI)
General-purpose end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.- Volume Discount
› Configure nowStarting from∗ ： 25.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Multi-Flute Center Cut Short CC-EMS
OSG
Cobalt high speed steel centre cut.
Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copper
Coating: Uncoated, Standard/ageing category: Manufacturer's standard product, Number of flutes (pcs.): 4
Skew angle: standard spiral (30 to 44°).- Volume Discount
› Configure nowStarting from∗ ： 16.82 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Rough and Finish End Mills RFE
OSG
Rough under-finish end mill uses an unique trapezoidal blade shape that is capable of performing heavy cutting and finish cutting simultaneously. Nicks that are perpendicular to the axis and the flute strength helps withstand heavy cutting.- Volume Discount
› Configure nowStarting from∗ ： 74.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
αHM α Nick Roughing Hard Type Regular-Blade Type
SANKO MFG
A hard pitch type roughing end mill. Ideal for heavy duty groove cutting. Enables a wide range of machining applications, due to the regular flute length.› Configure nowStarting from∗ ： 45.22 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut
MISUMI
Powdered HSS with high durability is available more cheaply than the cobalt HSS market price- Volume Discount
- TiCN
- 4 Flutes
- R (Regular)
› Configure nowStarting from∗ ： 32.79 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model
MISUMI
[Features]
-Powdered high-speed steel, square, uncoated, long flute length, 4-flute type, which is expected to last a long time
-Suitable for milling deep cavities
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, performance range, prices, etc.- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
› Configure nowStarting from∗ ： 20.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AG Mill, Heavy AGHV
NACHI(FUJIKOSHI)
Performs high efficiency coarse grooving of workpiece materials such as steel, stainless steel and aluminum. Suitable for semi-finishing.- Volume Discount
› Configure nowStarting from∗ ： 47.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
AG Mill, 2-Flute 2AGE
NACHI(FUJIKOSHI)
Performs high-speed, high-efficiency machining of workpiece materials from carbon steel and stainless steel to aluminum.- Volume Discount
› Configure nowStarting from∗ ： 30.24 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
G Standard End Mill, 4-Flute 4GE
NACHI(FUJIKOSHI)
General-purpose coated end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum. Suitable for side surface processing.- Volume Discount
› Configure nowStarting from∗ ： 33.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SG-FAX Roughing End Mill, Large Pitch, Medium SGLREM
NACHI(FUJIKOSHI)
Performs high efficiency coarse grooving of workpiece materials such as steel, stainless steel and aluminum. Large pitch nick.- Volume Discount
› Configure nowStarting from∗ ： 91.35 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SG-FAX Roughing End Mill, Regular Length, Short SGFRERS
NACHI(FUJIKOSHI)
Performs high efficiency coarse grooving of workpiece materials such as steel, stainless steel and aluminum. Fine pitch nick.- Volume Discount
› Configure nowStarting from∗ ： 83.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 49.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
G Standard End Mill, 2-Flute 2GE
NACHI(FUJIKOSHI)
General-purpose coated end-mill that performs machining of workpiece materials from carbon steel and stainless steel to aluminum.- Volume Discount
› Configure nowStarting from∗ ： 26.35 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
2-Flute General Use, Short EDS
OSG
High speed steel square series.
Tool material: Cobalt high speed steel, Working material: General steel/stainless steel/cast iron/aluminium/copper
Coating: Uncoated, Standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2
Zerration angle: Standard helix (30 to 44°).- Volume Discount
› Configure nowStarting from∗ ： 15.46 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
XPM, Long-Shank Short Fine-Pitch Type, VLS-XPM-RESF
OSG
V coating applied powder high speed XPM roughing. Flute with excellent chip control.- Volume Discount
› Configure nowStarting from∗ ： 60.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Short, Fine Pitch, EX-TIN-RESF
OSG
Roughing end mill short-blade series with TiN coating for heavy cutting.- Volume Discount
› Configure nowStarting from∗ ： 45.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL Coated End Mill (Roughing Short Fine-Pitch Type) WH-RESF
OSG
High-speed steel roughing end mills of next generation. For both dry and wet machining.› Configure nowStarting from∗ ： 45.80 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
End Mill (Roughing Medium Type), EX-REEN
OSG
Centre cutting series of heavy duty roughing cutters
Tool material: Cobalt high speed steel, Work material: General steel/stainless steel/cast iron/aluminium/copper
Coating: Uncoated, Standard/ageing category: Manufacturer's standard product, Helix angle: Standard helix (30 to 44°).- Volume Discount
› Configure nowStarting from∗ ： 36.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Rough and Finish End Mills (Long Type) RFEL
OSG
Rough under-finish end mill uses an unique trapezoidal blade shape that is capable of performing heavy cutting and finish cutting simultaneously. Nicks that are perpendicular to the axis and the flute strength helps withstand heavy cutting.› Configure nowStarting from∗ ： 187.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
End Mill (Roughing Long-Shank Short Type), EX-LS-REES
OSG
General purpose roughing cutter for heavy machining with long shank and cobalt high speed steel as base material.- Volume Discount
› Configure nowStarting from∗ ： 42.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
WXL Coated End Mill (Roughing Long Type), WH-REEL
OSG
High-speed steel roughing end mills of next generation. For both dry and wet machining.- Volume Discount
› Configure nowStarting from∗ ： 72.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
3S End Mill, 4-Flute (Standard Blade)
FUKUDA
Side cutting and groove re-polishing are easy- Volume Discount
› Configure nowStarting from∗ ： 26.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
P-XαS P Coated X α Nick Short Blade
SANKO MFG
A semi-fine pitch type roughing end mill. Excellent chip discharge.› Configure nowStarting from∗ ： 56.78 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
S-FPαM S-Coated Fine Pitch Regular Blade
SANKO MFG
[Features]
· Fine pitch type roughing endmill with S coating.
· Machining allowance can be reduced when performing finish machining.
· Enables a wide range of machining applications, due to the regular flute length.› Configure nowStarting from∗ ： 79.67 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
α H α Nick Hard Type
SANKO MFG
A hard pitch type roughing end mill. Ideal for heavy duty groove cutting.- Volume Discount
› Configure nowStarting from∗ ： 39.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
SL Regular Slotting Blade
SANKO MFG
An end mill with a straight blade and 2 cutting edges.
Materials: HS-Co (cobalt high-speed steel)
Outer diameter tolerance: -0.03 to 0
Straight blade.- Volume Discount
› Configure nowStarting from∗ ： 20.75 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
V-WREES, HSS-Co end mill
OSG
HSS-Co end mill - Multiflute, for roughing, short length of cut - Weldon shank› Configure nowStarting from∗ ： 35.30 € Min. Shipping Days ： 2 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!- Volume Discount
- AS
- 4 Flutes
- S (Short)
› Configure nowStarting from∗ ： 38.64 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!- Volume Discount
- AS
- 4 Flutes
- R (Regular)
› Configure nowStarting from∗ ： 43.35 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!- Volume Discount
- AS
- 4 Flutes
- L (Long)
› Configure nowStarting from∗ ： 57.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut
MISUMI
The combination of AS coating and 45° helix achieves the astonishing durability for everything from general steel to stainless steel!- Volume Discount
- AS
- 3 Flutes
- S (Short)
› Configure nowStarting from∗ ： 47.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]
-The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded
-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- S (Short)
› Configure nowStarting from∗ ： 36.63 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut
MISUMI
[Features]
-The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded
-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- R (Regular)
› Configure nowStarting from∗ ： 43.10 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut
MISUMI
[Features]
-The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded
-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 4 Flutes
- L (Long)
› Configure nowStarting from∗ ： 57.21 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
MISUMI
[Features]
-The coating exhibits excellent durability, even in high-speed machining where the tool is heavily loaded
-The coating exhibits high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- AS
- 3 Flutes
- S (Short)
› Configure nowStarting from∗ ： 44.90 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
Powdered HSS with high durability is available more cheaply than the cobalt HSS market price- Volume Discount
- TiCN
- 4 Flutes
- S (Short)
› Configure nowStarting from∗ ： 24.74 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut
MISUMI
[Features]
-High-speed steel powder roughing type with long flute length expected to last long
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 4 Flutes
- L (Long)
› Configure nowStarting from∗ ： 45.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
MISUMI
[Features]
-Long shank of high-speed steel powder expected to last a long time
-Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TiCN
- 3 Flutes
- S (Short)
› Configure nowStarting from∗ ： 43.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| work material |
| Blade shape type |
| Number of flutes(sheet) |
| Tool Material Type |
| Machining Application |
| Shank diameter (d)(mm) |
| Coating |
| Overall Length (L)(mm) |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Underneck length (ℓ1)(mm) |
| shank |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | SANKO MFG | OSG | OSG | MISUMI | MISUMI | NACHI(FUJIKOSHI) | OSG | OSG | SANKO MFG | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | FUKUDA | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | OSG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut | Powdered High-Speed Steel Square End Mill, 4-Flute / Regular / Non-Coated Model | WXL Coated End Mill (Roughing Short Fine-Pitch Type) WH-RESF | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Short, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral / Regular, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Long, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, 45° Spiral, Short, Long Shank, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut | AS Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Center Cut | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Long, Center Cut | TiCN Coated Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut | ||||||||||||||||||||||||||||||
| Starting from∗ | 19.92 € *Unit price with basic configuration Volume Discount | 48.86 € *Unit price with basic configuration Volume Discount | 50.96 € *Unit price with basic configuration Volume Discount | 18.22 € *Unit price with basic configuration Volume Discount | 33.34 € *Unit price with basic configuration Volume Discount | - | - | 25.69 € *Unit price with basic configuration Volume Discount | 16.82 € *Unit price with basic configuration Volume Discount | 74.50 € *Unit price with basic configuration Volume Discount | 45.22 € *Unit price with basic configuration | 32.79 € *Unit price with basic configuration Volume Discount | 20.83 € *Unit price with basic configuration Volume Discount | 47.81 € *Unit price with basic configuration Volume Discount | 30.24 € *Unit price with basic configuration Volume Discount | 33.36 € *Unit price with basic configuration Volume Discount | 91.35 € *Unit price with basic configuration Volume Discount | 83.43 € *Unit price with basic configuration Volume Discount | 49.89 € *Unit price with basic configuration Volume Discount | 26.35 € *Unit price with basic configuration Volume Discount | 15.46 € *Unit price with basic configuration Volume Discount | 60.98 € *Unit price with basic configuration Volume Discount | 45.80 € *Unit price with basic configuration Volume Discount | 45.80 € *Unit price with basic configuration | 36.19 € *Unit price with basic configuration Volume Discount | 187.42 € *Unit price with basic configuration | 42.36 € *Unit price with basic configuration Volume Discount | 72.70 € *Unit price with basic configuration Volume Discount | 26.53 € *Unit price with basic configuration Volume Discount | 56.78 € *Unit price with basic configuration | 79.67 € *Unit price with basic configuration | 39.36 € *Unit price with basic configuration Volume Discount | 20.75 € *Unit price with basic configuration Volume Discount | 35.30 € *Unit price with basic configuration | 38.64 € *Unit price with basic configuration Volume Discount | 43.35 € *Unit price with basic configuration Volume Discount | 57.97 € *Unit price with basic configuration Volume Discount | 47.62 € *Unit price with basic configuration Volume Discount | 36.63 € *Unit price with basic configuration Volume Discount | 43.10 € *Unit price with basic configuration Volume Discount | 57.21 € *Unit price with basic configuration Volume Discount | 44.90 € *Unit price with basic configuration Volume Discount | 24.74 € *Unit price with basic configuration Volume Discount | 45.86 € *Unit price with basic configuration Volume Discount | 43.62 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 7 Days | 7 Days | 6 Days | 6 Days | 6 Days | 6 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 7 Days | 6 Days | 6 Days | 2 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 3 ～ 40 | 6 ～ 50 | 10 ～ 50 | 0.8 ～ 40 | 8 ～ 50 | 2.7 ～ 24.99 | 3 ～ 25 | 2.5 ～ 50 | 2.5 ～ 40 | 12 ～ 50 | 6 ～ 50 | 6 ～ 30 | 3 ～ 25 | 3 ～ 50 | 1 ～ 50 | 2.5 ～ 50 | 6 ～ 50 | 6 ～ 50 | 6 ～ 50 | 1 ～ 50 | 0.45 ～ 60 | 6 ～ 50 | 6 ～ 50 | 6 ～ 40 | 6 ～ 50 | 20 ～ 50 | 6 ～ 50 | 10 ～ 40 | 3 ～ 100 | 5 ～ 50 | 5 ～ 50 | 5 ～ 50 | 2 ～ 49 | - | 6 ～ 30 | 6 ～ 30 | 10 ～ 30 | 6 ～ 30 | 5 ～ 32 | 6 ～ 30 | 10 ～ 30 | 6 ～ 30 | 6 ～ 32 | 10 ～ 30 | 6 ～ 30 |
| Blade length (ℓ)(mm) | 15 ～ 110 | 24 ～ 150 | 25 ～ 80 | 6 ～ 110 | 20 ～ 75 | 10 ～ 60 | 10 ～ 60 | 7 ～ 70 | 10 ～ 65 | 40 ～ 120 | 15 ～ 110 | 19 ～ 68 | 15 ～ 90 | 9 ～ 70 | 2 ～ 70 | 7 ～ 70 | 16 ～ 122 | 15 ～ 70 | 15 ～ 70 | 2 ～ 70 | 1.1 ～ 80 | 11 ～ 75 | 13 ～ 75 | 13 ～ 63 | 16 ～ 112 | 106 ～ 212 | 13 ～ 75 | 45 ～ 125 | 13 ～ 80 | 10 ～ 80 | 15 ～ 120 | 8 ～ 75 | 10 ～ 60 | - | 13 ～ 45 | 19 ～ 68 | 45 ～ 90 | 11 ～ 45 | 13 ～ 53 | 19 ～ 68 | 45 ～ 90 | 11 ～ 45 | 13 ～ 53 | 45 ～ 90 | 11 ～ 45 |
| work material | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | General Steel[○] / Quenched and tempered steel[○] | - | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Blade shape type | Square | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Roughing | Roughing | Roughing | Square | Roughing | Square | Square | Roughing | Roughing | Roughing | Square | Square | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Square | Roughing | Roughing | Roughing | Square | - | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing |
| Number of flutes(sheet) | 4 | 4 ～ 6 | 4 ～ 6 | 2 | 4 | 2 | 2 | 4 | 4 | 4 ～ 8 | 4 ～ 6 | 3 ～ 5 | 4 | 4 ～ 6 | 2 | 4 | 3 ～ 6 | 3 ～ 6 | 4 ～ 6 | 2 | 2 | 3 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 2 | - | 3 ～ 5 | 3 ～ 5 | 4 ～ 5 | 3 ～ 4 | 3 ～ 6 | 3 ～ 5 | 4 ～ 5 | 3 ～ 4 | 3 ～ 6 | 4 ～ 5 | 3 ～ 4 |
| Tool Material Type | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Alloy HSS | Alloy HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Powder high-speed steel | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Alloy HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | - | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel | Powder high-speed steel |
| Machining Application | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Side | Side / Groove | Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | - | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts |
| Shank diameter (d)(mm) | 6 ～ 32 | 6 ～ 42 | 10 ～ 42 | 6 ～ 32 | 6 ～ 42 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 32 | 12 ～ 42 | 6 ～ 42 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 32 | 6 ～ 42 | 20 ～ 42 | 6 ～ 42 | 10 ～ 32 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 32 | - | 6 ～ 25 | 6 ～ 25 | 10 ～ 25 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 10 ～ 25 | 6 ～ 25 | 6 ～ 32 | 10 ～ 25 | 6 ～ 25 |
| Coating | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiCN | Non-Coated | AG | AG | TiN | TiCN | TiCN | Non-Coated | TiN | Non-Coated | - | TiN | - | Non-Coated | Non-Coated | Non-Coated | - | Non-Coated | For General Steels (AlCrN, etc.) | TiCN | Non-Coated | Non-Coated | - | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiCN | TiCN | TiCN |
| Overall Length (L)(mm) | 60 ～ 195 | 68 ～ 252 | 90 ～ 200 | 50 ～ 195 | 80 ～ 350 | 50 ～ 130 | 50 ～ 130 | 50 ～ 160 | 50 ～ 150 | 90 ～ 210 | 60 ～ 200 | 63 ～ 144 | 60 ～ 160 | 50 ～ 160 | 50 ～ 160 | 50 ～ 160 | 80 ～ 220 | 60 ～ 160 | 60 ～ 160 | 50 ～ 160 | 45 ～ 170 | 80 ～ 210 | 57 ～ 177 | 80 ～ 185 | 60 ～ 214 | 180 ～ 315 | 80 ～ 210 | 100 ～ 220 | 51 ～ 180 | 70 ～ 200 | 80 ～ 240 | 55 ～ 165 | 60 ～ 170 | - | 57 ～ 121 | 63 ～ 144 | 95 ～ 166 | 80 ～ 160 | 57 ～ 133 | 63 ～ 144 | 95 ～ 166 | 80 ～ 160 | 57 ～ 133 | 95 ～ 166 | 80 ～ 160 |
| Torsion Angle (θ) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Weak torsion (15˚ to 25˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Weak torsion (15˚ to 25˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Weak torsion (15˚ to 25˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | No torsion | - | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) |
| Base Blade Y/N | - | - | Available | - | - | Available | Available | - | - | - | Available | Available | Available | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Available | Available | Available | Available | Available | - | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| shank | Straight | Straight | - | Straight | Straight | - | - | - | Straight | Straight | - | - | - | - | - | - | - | - | - | - | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1/2
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
-
-
Blade length (ℓ)(mm)
-
work material
-
Blade shape type
-
Number of flutes(sheet)
-
Tool Material Type
-
Machining Application
-
Shank diameter (d)(mm)
-
Coating
-
Overall Length (L)(mm)
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Underneck length (ℓ1)(mm)
-
shank
Brand
CAD data type
-
- 2D
- 3D
Categories related to Square HSS End Mills
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.