Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.

Chamfer, V-Grooves（Tool Material Type：Carbide）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 13 Days or Less 18 Days or Less

?* Information on days to ship and prices

Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

MISUMI

Capable of everything from positioning to chamfering in a single shot

Volume Discount

Non-Coated
Aluminum
2 Flutes

Select to compare

› Configure now
Starting from^∗ ：	40.79 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°

MAKOTOLOY

[Features]
· A single V-cut end mill that can be used for various purposes. Ideal for MC and NC machining.
· The blade tip is close to a V-edge so there is minimum residue in the bottom part during V-grooving.
· Based on a right-blade, clockwise-turning 30° type carbide end mill, ensuring optimum sharpness and good cutting chip discharge.
· An ultra-fine particle carbide alloy is used for the carbide material, ensuring a long tool life.
· Standard type.

Select to compare

› Configure now
Starting from^∗ ：	80.16 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

TS coated carbide chamfer, V grooving end mill, 2-flute

MISUMI

[Features]
-Ideal for chamfers and V-grooves
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.

Volume Discount

TS
General Steel
2 Flutes

Select to compare

› Configure now
Starting from^∗ ：	56.49 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TS coated carbide chamfering end mill, 2-flute / short model

MISUMI

[Features]
-Ideal for chamfering. Can also be used as a deburring tool
-Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting
-Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above
-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

› Configure now
Starting from^∗ ：	38.81 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

MISUMI

[Features]
・Popular 3-flute type for helix angle chambering with high feed rate.
・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
・It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	52.47 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

MISUMI

[Features]
・Machining from positioning to chamfering with a single tool.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	38.75 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P

OSG

Positive chamfer cutter with long shank. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	78.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Toglon Miniature Hard SP 90° ALT Coating

IWATA TOOL

[Features]
· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	85.44 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Milling Cutter for 60° Chamfering Type N 6711

GUHRING

Taper half-angle 30° chamfering milling cutter.

Select to compare

› Configure now
Starting from^∗ ：	40.62 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Chamfering Cutter KMC-2

KYOWA SEIKO

[Features] It can be used for chamfering and horizontal machining. [Features] By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron and aluminium.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	41.70 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Electro-Deposition Router ED-EM

OSG

Select to compare

› Configure now
Starting from^∗ ：	33.77 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°

MAKOTOLOY

Select to compare

› Configure now
Starting from^∗ ：	80.16 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V

THE CUT

[Features]
· No need to turn over the work material. (Also removes through-hole burrs)
· Both sides can be chamfered with the one cutter tool.
· Ultra-fine particle carbide with TiAlN coating for a longer tool life.

Select to compare

› Configure now
Starting from^∗ ：	143.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

MISUMI

Ideal for the Deep Chamfering of Workpieces

Volume Discount

TS
General Steel
2 Flutes

Select to compare

› Configure now
Starting from^∗ ：	48.89 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TS coated carbide chamfering end mill, 2-flute / 15° spiral

MISUMI

[Features]
-The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool
-The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes

Select to compare

› Configure now
Starting from^∗ ：	40.79 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TS coated carbide chamfering end mill, 3-flute / short model

MISUMI

[Features]
-Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).
-Peripheral grooves allow bevel, contour and spiral cutting
-The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type
-With helix angle on peripheral flutes
-Can also be used as a deburring tool
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Select to compare

› Configure now
Starting from^∗ ：	46.59 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TS coated carbide inner R-cutter, 2-flute

MISUMI

[Features]
Easy high-quality machining of corner radii
-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
2 Flutes

Select to compare

› Configure now
Starting from^∗ ：	41.04 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide inner R-cutter, 2-flute

MISUMI

Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes

Volume Discount

Non-Coated
General Steel
2 Flutes

Select to compare

› Configure now
Starting from^∗ ：	40.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

MISUMI

The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

Volume Discount

TS
SUS
2 Flutes

Select to compare

› Configure now
Starting from^∗ ：	61.87 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

MISUMI

The sharp helix blade achieves the clean machined surface with less burr

Volume Discount

Non-Coated
Aluminum
2 Flutes

Select to compare

› Configure now
Starting from^∗ ：	60.11 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type

MISUMI

[Features]
・MISUMI's original inner radius cutter specialized for machining high hardness steel.
・Ideal for high hardness steel inner radius machining up to 65 HRC.
・High-efficiency machining is possible by adopting a 4-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	60.85 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type

MISUMI

[Features]
・Popular chamfering product with helix angle.
・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	34.92 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Chamfer End Mill 2-Flute

MISUMI

[Features]
・Recommended for chamfering general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	32.62 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

MISUMI

[Features]
・Recommended for deep section chamfering of general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
・The long type is ideal for deep cavity milling.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	43.97 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Inner Radius Cutter, 2-Flute

MISUMI

[Features]
・An essential item for corner rounding.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	41.04 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type

MISUMI

[Features]
・The popular high hardness steel chamfer end mill is even more affordable.
・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)
・High-efficiency machining is possible by adopting a 6-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.

Volume Discount

2D / 3D CAD data available

Select to compare

› Configure now
Starting from^∗ ：	42.86 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Leading Drills, FX-LS-LDS

OSG

90° of tip angle with FX coating, carbide leading drill with long shank. Ideal for chamfering deep parts.

Select to compare

› Configure now
Starting from^∗ ：	295.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Leading Drills, FX-LDS

OSG

90° of tip angle with FX coating, carbide leading drill. It enables high speed and long life.

Select to compare

› Configure now
Starting from^∗ ：	357.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Corner, Rounding Shape, FX-ECR

OSG

Specialized R chamfering tools. As high toughness cemented carbide alloy was used as the base material, it is able to handle a wide range of workpieces.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	61.45 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

2-Flute Spiral Chamfering Cutter FX-SCC

OSG

By adopting of sharp high helix, clean working surface with less burr can be obtained.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	88.29 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Spiral Chamfering Cutter (for Steel / Aluminum Alloy) CA-SCC

OSG

By adopting of sharp high helix, clean working surface with less burr can be obtained.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	81.19 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Shank Spiral Chamfering Cutter FX-LS-SCC

OSG

Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.

Select to compare

› Configure now
Starting from^∗ ：	84.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

2-Flute Long Shank Spiral Chamfering Cutter (for Steel / Aluminum) CA-LS-SCC

OSG

Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	87.63 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute, Chamfering Cutter (Negative Type) HSCT-N

OSG

End mill for negative chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	73.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute, Chamfering Cutter (Positive Type) HSCT-P

OSG

End mill for positive chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	73.51 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N

OSG

End mill for negative chamfering, long shank type. It suppresses chatter during machining and has good chip evacuation for a nice surface finish.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	78.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Chamfering Cutter for SV Chamfering Process

UNION TOOL

[Features]
· Carbide spiral chamfering cutter
· Half Taper Angle of 45°
· The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.

Select to compare

› Configure now
Starting from^∗ ：	135.77 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Solid Chamfering End Mill 3-Flute

DIXI

High rigidity, high precision, compact chisel structure enables high precision positioning, accurate positioning on curved and sloped surfaces, and high-quality chamfering.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	49.92 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Mini WR Chamfer Cutter

EIKOSHA

Front / Back R-Chamfering

Select to compare

› Configure now
Starting from^∗ ：	172.40 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Mini WR Chamfer Cutter, Long

EIKOSHA

Front / Back R-Chamfering, Long Pattern

Select to compare

› Configure now
Starting from^∗ ：	225.74 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SAGCCC SA Coated Carbide for Center Chamfering

SANKO MFG

Center chamfering cutter with TiAlN coating. Double angle adopted for the chamfer part.

Select to compare

› Configure now
Starting from^∗ ：	101.99 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GCCC for Carbide Center Chamfering

SANKO MFG

[Features]
· Melding the design concepts of endmills and drills, it is available for a wide range of applications.
· Double angle adopted for the chamfer part.
· Provides a clean finish with fewer burrs.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	74.70 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Toglon Sharp SP 60° Carbide

IWATA TOOL

Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	80.94 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Toglon Sharp SP 60° Carbide DLC Coating

IWATA TOOL

Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

Select to compare

› Configure now
Starting from^∗ ：	97.13 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Toglon Sharp SP 90° Carbide

IWATA TOOL

[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	65.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Application
Tip angle (θ)
Tool Diameter (D)(mm)
work material
Single blade, two blades
Peripheral Blade Y/N
Tool Material Type
Coating Y/N
Coating Type
R Size (R)(mm)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MISUMI	MAKOTOLOY	MISUMI	MISUMI	MISUMI	MISUMI	OSG	IWATA TOOL	GUHRING	KYOWA SEIKO	OSG	MAKOTOLOY	THE CUT	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	UNION TOOL	DIXI	EIKOSHA	EIKOSHA	SANKO MFG	SANKO MFG	IWATA TOOL	IWATA TOOL	IWATA TOOL
Product Series	Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral	V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 90°	TS coated carbide chamfer, V grooving end mill, 2-flute	TS coated carbide chamfering end mill, 2-flute / short model	XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type	XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle	3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P	Toglon Miniature Hard SP 90° ALT Coating	Milling Cutter for 60° Chamfering Type N 6711	Carbide Chamfering Cutter KMC-2	Electro-Deposition Router ED-EM	V-Cut Carbide End Mills, Standard Type, Non-Coating Series MVS 60°	Chamfering Cutter, Carbide, Uramen-Maru (Standard Type) C-BMC-V	TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model	TS coated carbide chamfering end mill, 2-flute / 15° spiral	TS coated carbide chamfering end mill, 3-flute / short model	TS coated carbide inner R-cutter, 2-flute	Carbide inner R-cutter, 2-flute	TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade	Carbide Chamfering End Mill for Aluminum Machining, 2-Flute	XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type	XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type	XAL Series Carbide Chamfer End Mill 2-Flute	XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type	XAL Series Carbide Inner Radius Cutter, 2-Flute	XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type	Leading Drills, FX-LS-LDS	Leading Drills, FX-LDS	2-Flute Corner, Rounding Shape, FX-ECR	2-Flute Spiral Chamfering Cutter FX-SCC	2-Flute Spiral Chamfering Cutter (for Steel / Aluminum Alloy) CA-SCC	2-Flute Long Shank Spiral Chamfering Cutter FX-LS-SCC	2-Flute Long Shank Spiral Chamfering Cutter (for Steel / Aluminum) CA-LS-SCC	3-Flute, Chamfering Cutter (Negative Type) HSCT-N	3-Flute, Chamfering Cutter (Positive Type) HSCT-P	3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N	Spiral Chamfering Cutter for SV Chamfering Process	Carbide Solid Chamfering End Mill 3-Flute	Carbide Mini WR Chamfer Cutter	Carbide Mini WR Chamfer Cutter, Long	SAGCCC SA Coated Carbide for Center Chamfering	GCCC for Carbide Center Chamfering	Toglon Sharp SP 60° Carbide	Toglon Sharp SP 60° Carbide DLC Coating	Toglon Sharp SP 90° Carbide
CAD					2D / 3D	2D / 3D															2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D
Starting from^∗	40.79 € *Unit price with basic configuration Volume Discount	80.16 € *Unit price with basic configuration	56.49 € *Unit price with basic configuration Volume Discount	38.81 € *Unit price with basic configuration Volume Discount	52.47 € *Unit price with basic configuration Volume Discount	38.75 € *Unit price with basic configuration Volume Discount	78.36 € *Unit price with basic configuration Volume Discount	85.44 € *Unit price with basic configuration Volume Discount	40.62 € *Unit price with basic configuration	41.70 € *Unit price with basic configuration Volume Discount	33.77 € *Unit price with basic configuration	80.16 € *Unit price with basic configuration	143.23 € *Unit price with basic configuration	48.89 € *Unit price with basic configuration Volume Discount	40.79 € *Unit price with basic configuration Volume Discount	46.59 € *Unit price with basic configuration Volume Discount	41.04 € *Unit price with basic configuration Volume Discount	40.53 € *Unit price with basic configuration Volume Discount	61.87 € *Unit price with basic configuration Volume Discount	60.11 € *Unit price with basic configuration Volume Discount	60.85 € *Unit price with basic configuration Volume Discount	34.92 € *Unit price with basic configuration Volume Discount	32.62 € *Unit price with basic configuration Volume Discount	43.97 € *Unit price with basic configuration Volume Discount	41.04 € *Unit price with basic configuration Volume Discount	42.86 € *Unit price with basic configuration Volume Discount	295.75 € *Unit price with basic configuration	357.80 € *Unit price with basic configuration	61.45 € *Unit price with basic configuration Volume Discount	88.29 € *Unit price with basic configuration Volume Discount	81.19 € *Unit price with basic configuration Volume Discount	84.50 € *Unit price with basic configuration	87.63 € *Unit price with basic configuration Volume Discount	73.17 € *Unit price with basic configuration Volume Discount	73.51 € *Unit price with basic configuration Volume Discount	78.36 € *Unit price with basic configuration Volume Discount	135.77 € *Unit price with basic configuration	49.92 € *Unit price with basic configuration Volume Discount	172.40 € *Unit price with basic configuration	225.74 € *Unit price with basic configuration	101.99 € *Unit price with basic configuration	74.70 € *Unit price with basic configuration Volume Discount	80.94 € *Unit price with basic configuration Volume Discount	97.13 € *Unit price with basic configuration	65.80 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	5 Days	Same day	5 Days	5 Days	5 Days	5 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days
Specifications	Non-Coated Aluminum 2 Flutes		TS General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)										TS General Steel 2 Flutes	TS General Steel 2 Flutes	TS General Steel 3 Flutes S (Short)	TS General Steel 2 Flutes	Non-Coated General Steel 2 Flutes	TS SUS 2 Flutes	Non-Coated Aluminum 2 Flutes
Application	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove / Drilling	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	-	Chamfering/Horizontal	-	Hole Chamfer / Chamfering/Horizontal	Hole Chamfer / Drilling / Other	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Round Chamfer	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	-	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal	Centering (Positioning) / Hole Chamfer	Centering (Positioning) / Hole Chamfer	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Hole Chamfer / Chamfering/Horizontal / Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Round Chamfer	Round Chamfer	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove
Tip angle (θ)	90	90	60 ～ 120	60 ～ 120	-	-	90	90	60	90°	-	60	90°	90	90	90	-	-	90	90	-	-	-	-	-	-	90	90	-	90	90	90	90	90	90	90	90	90	-	-	-	-	60	60	90
Tool Diameter (D)(mm)	3 ～ 12	1 ～ 20	3 ～ 16	3 ～ 12	-	-	1 ～ 2	0.1 ～ 1.5	4 ～ 12	0.3 ～ 4	4 ～ 12	1 ～ 20	2.8 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	-	-	3 ～ 12	3 ～ 12	-	-	-	-	-	-	16 ～ 25	16 ～ 25	0.5 ～ 1.5	0.8 ～ 1	0.8 ～ 1	0.8 ～ 1	0.8 ～ 1	1 ～ 2	1 ～ 2	1 ～ 2	0.8 ～ 1	2 ～ 12	3.8 ～ 13.4	6.8 ～ 15.4	3 ～ 20	3 ～ 20	1.2 ～ 16	2 ～ 16	1.2 ～ 16
work material	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	General Steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	Quenched and tempered steel[○] / High Hardness Steel[○]	-	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	-	General Steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[○]	Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Graphite[○] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○]	General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	General Steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	General Steel[○] / Aluminum[○] / Copper[○] / Resin[○]
Single blade, two blades	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	Single blade	-	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	Single blade	-	-	-	-	-	Single blade	Single blade	Single blade
Peripheral Blade Y/N	N/A	-	N/A	Available	Available	N/A	N/A	N/A	-	-	-	-	-	Available	N/A	Available	N/A	N/A	N/A	N/A	N/A	Available	N/A	Available	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	-	-	-	Available	Available	N/A	N/A	N/A
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
Coating Y/N	N/A	N/A	Available	Available	Available	Available	N/A	Available	Available	N/A	Available	N/A	Available	Available	Available	Available	Available	N/A	Available	N/A	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	N/A	Available	N/A	N/A	N/A	N/A	N/A	Available	-	-	Available	N/A	N/A	Available	N/A
Coating Type	-	-	TS	TS	AlCrN	AlCrN	Non-Coated	ALT	TiAlN	-	-	-	TiAlN	TS	TS	TS	TS	-	TS	-	AlCrN	AlCrN	AlCrN	AlCrN	AlCrN	TS	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	TiAlN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	TiAlN	-	-	TiAlN	Non-Coated	-	DLC	-
R Size (R)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.1 ～ 5	0.2 ～ 5	-	-	-	-	-	-	-	-	-	-	0.1 ～ 2	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filter by:

Stock

- Show only stock items
Clear

Application
- Centering (Positioning)
- Hole Chamfer
- Chamfering/Horizontal
- V Groove
- Round Chamfer
- Drilling
- Other
Images

Clear

Tip angle (θ)
5～85°

30

45

45°

60

60°

65°

75°

90

90°

Center Hole Angle: 90°

120

130

135
Drawing

Clear

Tool Diameter (D)(mm)
0 to 2

0.1

0.2

0.3

0.3, 0.6

0.4

0.5

0.5, 1

0.6

0.7

0.8

0.9

1

1, 2

1.2

1.5

1.6

1.8

2

2.4

2.5

2.6

2.8

3

3.17

3.2

3.3

3.4

3.5

3.6

3.8

4

4.2

4.4

4.5

4.6

4.8

5

5.2

5.4

5.5

5.6

5.8

6

6.2

6.35

6.4

6.5

6.6

6.8

7

7.2

7.4

7.5

7.6

7.8

7.92

8

8.2

8.4

8.5

8.8

9.4

9.53

10

10.2

10.4

10.8

11

11.4

12

12.4

12.7

13

13.4

14

14.4

15

15.4

15.88

16

17

18

19

20

21

22

23

25

26

30

31

32

35

36

40

45

46

50

55

60

65

66

70

75

80

90

100
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Single blade, two blades
- Single blade
- Double-edged
Images

Clear

Peripheral Blade Y/N
- Available
- N/A
Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
Details

Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- TS
- TiAlN
- TiCN
- TiN
- DLC
- Non-Coated
- AlCrN
- ALT
- Other
Details

Clear

R Size (R)(mm)
0.1

0.15

0.2

0.25

0.3

0.35

0.4

0.5

0.55

0.6

0.7

0.75

0.8

0.85

0.9

0.95

1

1, 1.5

1.1

1.2

1.25

1.3

1.4

1.5

1.6

1.7

1.75

1.8

1.9

2

2, 3

2.1

2.2

2.25

2.3

2.4

2.5

2.6

2.7

2.75

2.8

2.9

3

3.25

3.5

3.75

4

4.25

4.5

4.75

5

5.25

5.5

5.75

6

6.25

6.5

6.75

7

7.25

7.5

7.75

8

8.5

9

9.5

10

10.5

11

11.5

12

12.5

13

13.5

14

14.5

15

15.5

16

16.5

17

17.5

18

18.5

19

19.5

20

20.5

21

21.5

22

22.5

23

23.5

24

24.5

25

25.5

26

26.5

27

27.5

28

28.5

29

29.5

30
Drawing

Clear