Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

ASAHI SEIKO Bearing Units

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less

?* Information on days to ship and prices

Pillow Unit with Set Screws, Cylindrical Hole Shape, UCP

ASAHI SEIKO

Standard model number. Bearing box with a sturdy integrated structure and inserted bearing. Used with a wide range of transmission equipment. Cast iron series

[Features]
· Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
· Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
· Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
· This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
· Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
· Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
· Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
· Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

Volume Discount

Stock

Starting from^∗ ：	13.46 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Diamond Flanged Unit, Silver Series with Eccentric Wheel, Cylindrical Hole Shape, UFL

ASAHI SEIKO

[Features]
· Smaller and more lightweight than conventional insert bearing units.
Also, the bearing box is marked with a center mark for easy positioning.

Volume Discount

Starting from^∗ ：	14.45 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Insert Bearing with Set Screws and Cylindrical Hole Shape, UC Shape

ASAHI SEIKO

[Features]
· Spherical outer diameter surface for alignment function. Two-layer sealed bearing that fixes to the shaft on one side of the wide inner ring with two hex socket head set screws.

Volume Discount

Starting from^∗ ：	10.06 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Diamond Flanged Unit, Silver Series with Eccentric Wheel, Cylindrical Hole Shape, MUFL

ASAHI SEIKO

[Features]
· The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.

Volume Discount

Stock

Starting from^∗ ：	38.96 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Square Flanged Unit with Set Screw, Cylindrical Hole Shape, UCF

ASAHI SEIKO

[Features]
· The bearing box is a rectangular shape, and is mounted to the side walls of machinery. As a result, the bearing mounting part has a simple structure and can be used for a wide range of applications.

Volume Discount

Starting from^∗ ：	13.77 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Diamond Flanged Unit with Set Screws, Cylindrical Hole Shape, UCFL

ASAHI SEIKO

[Features]
· The bearing box is a diamond shape mounted with two bolts, so it can be used in any place and is simple to mount to machinery.

Volume Discount

Stock

Starting from^∗ ：	13.43 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Take-Up Unit With Frame, Cylindrical-Bore Type With Set Screws, UCT200+WB Type

ASAHI SEIKO

Combines a take-up unit with a steel plate frame, and the adjustment bolts enable more flexible adjustment of the shaft center.

Starting from^∗ ：	131.51 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Take-Up-Type Unit, Cylindrical-Bore Type With Set Screws, UCT Type

ASAHI SEIKO

Can be used for belt and chain adjustments in areas where free movement of the shaft center is required.

Starting from^∗ ：	22.53 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Diamond-Flanged Unit, Cylindrical-Bore Type With Set Screws, BLFL Type

ASAHI SEIKO

The lightest bearing box of the cast iron diamond-flanged unit series, with a simple structure that combines bearings with rubber seals and is suitable for a transmission shaft with a relatively light load and medium to low speed.

Starting from^∗ ：	14.22 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Pillow Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, UP

ASAHI SEIKO

[Features]
· Smaller and more lightweight than conventional insert bearing units.
· Also, the bearing box is marked with a center mark for easy positioning.

Volume Discount

Starting from^∗ ：	13.88 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Diamond Flanged Unit, Silver Series with Set Screws, Cylindrical Hole Shape, KFL

ASAHI SEIKO

[Features]
· The bearing box is a diamond flange shape and can be mounted with two bolts, so it is optimal for space saving.

Volume Discount

Stock

Starting from^∗ ：	13.95 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Pillow Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, MUP

ASAHI SEIKO

The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.

[Features]
· Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
· Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
· Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
· This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
· Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
· Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
· Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
· Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

Starting from^∗ ：	43.11 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Insert Bearing, Cylindrical-Bore Type With Set Screws, B Type

ASAHI SEIKO

Both surfaces are sealed with a rubber seal, and the width of the inner and outer rings are narrower than in a UC-type bearing.

Starting from^∗ ：	9.91 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Join Ball Insert Type, Male Screw Rod End, JAM Shape

ASAHI SEIKO

[Features]
· The space between the two inserts is an oil sump, and the product is structured to maintain an arbitrary gap.

Volume Discount

Starting from^∗ ：	20.01 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Round Flanged Unit with Spigot Joint and Set Screws, Cylindrical Hole Shape, UCFC

ASAHI SEIKO

[Features]
· The bearing box mounting surface is fitted with a spigot joint which embeds itself in the partnered material, minimizing eccentricity during mounting for accurate positioning.

Starting from^∗ ：	21.38 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Diamond-Flanged Unit, Cylindrical-Bore Type With Set Screws, UCFA Type

ASAHI SEIKO

Diamond-flanged unit with bolt hole at one end on an arc to enable free adjustment of the shaft center when installing.

Starting from^∗ ：	21.76 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pillow Unit Silver Series with Set Screws, Cylindrical Hole Shape, KP

ASAHI SEIKO

[Features]
· Although the bearing box is a standard pillow shape, it is smaller and more lightweight than conventional insert bearing units.
· Also, the bearing box is marked with a center mark for easy positioning.
· The fixation method for the bearing box and shaft is the set screw method.

Volume Discount

Starting from^∗ ：	14.41 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Join Ball PTFE, Liner Type, Stainless Steel Female Screw Rod End, FDF Shape

ASAHI SEIKO

[Features]
· Because it uses a solid lubricating method, greasy supply is not required. Made of stainless steel.

Starting from^∗ ：	41.74 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pillow Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series, MUSP Shape

ASAHI SEIKO

The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well. Environmentally friendly series

[Features]
· Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
· Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
· Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
· This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
· Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
· Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
· Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
· Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

Starting from^∗ ：	55.96 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Diamond Flange Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series

ASAHI SEIKO

Starting from^∗ ：	54.85 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPH Type

ASAHI SEIKO

Pillow-type unit UCP200-type bearing box with raised center height.

Starting from^∗ ：	22.85 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPA Type

ASAHI SEIKO

A more compact bearing box than the pillow-type unit UCP200 type, with screw holes for mounting to suit areas with space restrictions.

Starting from^∗ ：	21.76 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Steel Plate Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, BPP Type

ASAHI SEIKO

Combines a built-in bearing with a rubber seal in a simple double steel plate bearing box structure, making it suitable for a transmission shaft with a relatively light load and medium to low speed.

Starting from^∗ ：	13.31 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Diamond-Flanged Unit, Cylindrical-Bore Type With Set Screws, BFL Type

ASAHI SEIKO

Starting from^∗ ：	17.41 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Steel Plate Round-Flanged Unit, Cylindrical-Bore Type With Set Screws, BPF Type CUCF

ASAHI SEIKO

Combines a built-in bearing with a rubber seal in a simple double steel plate bearing box structure, making it suitable for a transmission shaft with a relatively light load and medium to low speed.

Starting from^∗ ：	14.13 €
Min. Shipping Days ：	10 Days

*Unit price with basic configuration

Cartridge-Type Unit, Cylindrical-Bore Type With Set Screws, UCC Type

ASAHI SEIKO

Combines bearings with a cylindrical bearing box made of cast iron with the outer diameter surface given a grinding finish. The entire unit can be used in the same way as a general bearing, and it is suitable for a transmission shaft that expands and contracts.

Starting from^∗ ：	50.22 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Hanger Shaped Unit with Set Screws and Cylindrical Hole Shape, UCECH

ASAHI SEIKO

[Features]
· The bearing box is fitted with screw holes for pipes, and designed to hang down from steel pipes mounted to conveyors. For this reason, it is appropriate for use as a bearing for screw conveyor hangers.

Starting from^∗ ：	22.66 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Insert Bearing, Stainless Steel Series with Set Screws, Cylindrical Hole Shape, MUC

ASAHI SEIKO

[Features]
· Although the size is identical to the UC shape, the outer ring, inner ring, ball, slinger, and set screws are all made of stainless steel.

Starting from^∗ ：	54.09 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：
Specifications
Unit, Type
Bearing Unit, Type
Shaft Bore Dia. d(mm)
Unit Body Material
Bearing Inner Dia. Shape
Pillow Type, Category
Rolling Element Material
Surface Treatment


Brand	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO	ASAHI SEIKO
Product Series	Pillow Unit with Set Screws, Cylindrical Hole Shape, UCP	Diamond Flanged Unit, Silver Series with Eccentric Wheel, Cylindrical Hole Shape, UFL	Insert Bearing with Set Screws and Cylindrical Hole Shape, UC Shape	Diamond Flanged Unit, Silver Series with Eccentric Wheel, Cylindrical Hole Shape, MUFL	Square Flanged Unit with Set Screw, Cylindrical Hole Shape, UCF	Diamond Flanged Unit with Set Screws, Cylindrical Hole Shape, UCFL	Take-Up Unit With Frame, Cylindrical-Bore Type With Set Screws, UCT200+WB Type	Take-Up-Type Unit, Cylindrical-Bore Type With Set Screws, UCT Type	Diamond-Flanged Unit, Cylindrical-Bore Type With Set Screws, BLFL Type	Pillow Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, UP	Diamond Flanged Unit, Silver Series with Set Screws, Cylindrical Hole Shape, KFL	Pillow Unit Silver Series with Eccentric Wheel, Cylindrical Hole Shape, MUP	Insert Bearing, Cylindrical-Bore Type With Set Screws, B Type	Join Ball Insert Type, Male Screw Rod End, JAM Shape	Round Flanged Unit with Spigot Joint and Set Screws, Cylindrical Hole Shape, UCFC	Diamond-Flanged Unit, Cylindrical-Bore Type With Set Screws, UCFA Type	Pillow Unit Silver Series with Set Screws, Cylindrical Hole Shape, KP	Join Ball PTFE, Liner Type, Stainless Steel Female Screw Rod End, FDF Shape	Pillow Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series, MUSP Shape	Diamond Flange Shape with Eccentric Wheel Method, Stainless Steel and Silver Environmentally Friendly Series	Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPH Type	Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, UCPA Type	Steel Plate Pillow-Type Unit, Cylindrical-Bore Type With Set Screws, BPP Type	Diamond-Flanged Unit, Cylindrical-Bore Type With Set Screws, BFL Type	Steel Plate Round-Flanged Unit, Cylindrical-Bore Type With Set Screws, BPF Type CUCF	Cartridge-Type Unit, Cylindrical-Bore Type With Set Screws, UCC Type	Hanger Shaped Unit with Set Screws and Cylindrical Hole Shape, UCECH	Insert Bearing, Stainless Steel Series with Set Screws, Cylindrical Hole Shape, MUC
Starting from^∗	13.46 € *Unit price with basic configuration Volume Discount	14.45 € *Unit price with basic configuration Volume Discount	10.06 € *Unit price with basic configuration Volume Discount	38.96 € *Unit price with basic configuration Volume Discount	13.77 € *Unit price with basic configuration Volume Discount	13.43 € *Unit price with basic configuration Volume Discount	131.51 € *Unit price with basic configuration	22.53 € *Unit price with basic configuration	14.22 € *Unit price with basic configuration	13.88 € *Unit price with basic configuration Volume Discount	13.95 € *Unit price with basic configuration Volume Discount	43.11 € *Unit price with basic configuration	9.91 € *Unit price with basic configuration	20.01 € *Unit price with basic configuration	21.38 € *Unit price with basic configuration	21.76 € *Unit price with basic configuration	14.41 € *Unit price with basic configuration Volume Discount	41.74 € *Unit price with basic configuration	55.96 € *Unit price with basic configuration	54.85 € *Unit price with basic configuration	22.85 € *Unit price with basic configuration	21.76 € *Unit price with basic configuration	13.31 € *Unit price with basic configuration	17.41 € *Unit price with basic configuration	14.13 € *Unit price with basic configuration	50.22 € *Unit price with basic configuration	22.66 € *Unit price with basic configuration	54.09 € *Unit price with basic configuration
Min. Shipping Days ：	Same day	Same day	Same day	Same day	Same day	Same day	10 Days	Same day	Same day	Same day	Same day	Same day	5 Days	5 Days	Same day	5 Days	Same day	5 Days	5 Days	5 Days	Same day	5 Days	5 Days	5 Days	10 Days	9 Days	Same day	5 Days
Specifications	Stock			Stock		Stock					Stock
Unit, Type	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Others	Bearing Unit	Bearing Unit	Bearing Unit	Others	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit	Bearing Unit
Bearing Unit, Type	Pillow Type	Diamond-Shaped Flange Type	Others	Diamond-Shaped Flange Type	Square Flange Type	Diamond-Shaped Flange Type	Take-Up Type	Take-Up Type	Diamond-Shaped Flange Type	Pillow Type	Diamond-Shaped Flange Type	Pillow Type	Others	-	Round Flange Type	Diamond-Shaped Flange Type	Pillow Type	-	Pillow Type	Diamond-Shaped Flange Type	Pillow Type	Pillow Type	Pillow Type	Diamond-Shaped Flange Type	Diamond-Shaped Flange Type	Others	Others	Others
Shaft Bore Dia. d(mm)	12 ～ 140	8 ～ 30	15 ～ 70	10 ～ 30	12 ～ 140	12 ～ 60	20 ～ 65	12 ～ 140	12 ～ 35	10 ～ 30	10 ～ 30	10 ～ 30	20	8	12 ～ 100	17 ～ 50	10 ～ 30	6 ～ 12	12 ～ 25	10 ～ 25	12 ～ 50	12 ～ 50	12 ～ 35	20	20	50	12 ～ 50	20
Unit Body Material	Cast Iron	Others	Cast Iron	Others	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Others	Others	Others	Cast Iron	-	Cast Iron	Cast Iron	Others	-	-	-	Cast Iron	Cast Iron	Steel	Cast Iron	Stainless Steel	Cast Iron	Cast Iron	Stainless Steel
Bearing Inner Dia. Shape	Cylindrical Hole, Set Screw	Cylindrical Hole, Eccentric Collar	Cylindrical Hole, Set Screw	Cylindrical Hole, Eccentric Collar	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Taper Hole, Adapter	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Eccentric Collar	Cylindrical Hole, Set Screw	Cylindrical Hole, Eccentric Collar	Cylindrical Hole, Set Screw	-	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	-	Cylindrical Hole, Eccentric Collar	Cylindrical Hole, Eccentric Collar	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw	Cylindrical Hole, Set Screw
Pillow Type, Category	Standard	Standard	Standard	Standard	-	Standard	Standard	Standard	Standard	Lightweight	Standard	Lightweight	Standard	-	Standard	Standard	Standard	-	Standard	Standard	High Center	Standard	Standard	Standard	Standard	Standard	Standard	Standard
Rolling Element Material	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	-	Stainless Steel	Stainless Steel	Stainless Steel	-	-	-	Stainless Steel	Stainless Steel	Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Surface Treatment	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	-	-	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided

Filter by:

Stock

- Stock Items Included
Clear

Narrow search by specifying spec./dim.

Unit, Type
- Bearing Unit
- Plummer Block
- Framed Bearing Unit
- Others
Enlarge image

Clear

Bearing Unit, Type
- Pillow Type
- Square Flange Type
- Round Flange Type
- Diamond-Shaped Flange Type
- Take-Up Type
- Deformed Diamond-Shaped Flange Type
- Others
Enlarge image

Clear

Shaft Bore Dia. d(mm)
1-1/4

6

8

10

12

12.7

15

15.875

16

17

19.05

19.05 - 30

20

22.225

22.225 - 35

23.812

23.813

25

25.4

28.575

28.575 - 40

30

30.162

30.163

31.75

31.75 - 50

33.34

34.925

34.93

35

36.512

36.513

36.513 - 45

36.513 - 55

38.1

40

41.275

41.275 - 60

42.862

44.45

45

47.625

47.625 - 65

49.213

50

50.8

53.975 - 75

55

55.562

55.563

55.563 - 80

57.15

60

61.913

61.913 - 90

63.5

65

68.262

68.263

70

74.613

74.613 - 85

74.613 - 100

74.6131

75

79.375 - 90

80

82.55

85

87.313

87.313 - 120

90

95

100

105

110

114.3

115

120

125

130

131.763

138.113

140

160
Drawing

Clear

Unit Body Material
- Cast Iron
- Stainless Steel
- Steel Plate
- Structural Steel
- Resin
- Others
- Steel
Clear

Bearing Inner Dia. Shape
- Cylindrical Hole
- Cylindrical Hole, Set Screw
- Cylindrical Hole, Eccentric Collar
- Taper Hole
- Taper Hole, Adapter
- Others
Images

Clear

Pillow Type, Category
- Standard
- Thick
- High Center
- Narrow Width
- Lightweight
Images

Clear

Rolling Element Material
- Steel
- Stainless Steel
Clear

Surface Treatment
- Not Provided
- Black Oxide
Clear

Narrow search by specifying Brand

- MISUMI (13)
- Cost Efficient Products ()
- INA (209)
- SKF (113)
- NIPPON PILLOW BLOCK (39)
- ASAHI SEIKO (28)
- NTN (28)
- FAG (25)
- ZEN (12)
- FSBEARING (11)
- SNR (10)
- NKE BEARINGS (4)
- KMT BEARINGS (1)
- TIMKEN (1)
- SANWA CONVEYOR (1)
- TOHO (1)
Clear