- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
Grub Screws
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Grub screws with hexagon socket and flat point DIN 913 without LONG-LOK (K0707)
KIPP
· Version: steel or stainless steel (A 2)- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 0.13 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 13.02 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Grub screws with Brass / Plastic pivot, Steel
GANTER
Grub screws GN 913.3 with pivot in brass or pivot are used in applications, where marks and damage on the workpiece are unacceptable.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 0.94 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 2.82 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Grub Screws, ball-headed
HALDER
For combination with plastic thrust pads EH 22570.- 3D CAD data available
› Configure nowStarting from∗ ： 0.88 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Grub screws with brass / plastic pivot, Stainless Steel
GANTER
Stainless Steel-Grub screws GN 913.5 with pivot in brass or plastic are used in applications, where marks and damage on the workpiece are unacceptable.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 2.30 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Grub Screw Sets / with Thrust Point similar DIN 6332
MISUMI
similar DIN 6332- Volume Discount
- Stock
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 6.26 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Grub screws with retaining magnet, Steel
GANTER
Grub screws GN 913.6 with retaining magnet are a shielded magnetic system.
Suitable e.g. as workpiece stop, with the magnet holding the workpiece in place.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 5.26 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 11.30 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Fulcrum Screws
HALDER
Can be used as screw-in foot or thrust pad.Compact design for simple levelling by means of the spanner flat at the bushing or preferably by means of an internal hexagon.- 3D CAD data available
› Configure nowStarting from∗ ： 11.35 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Grub Screw _SGPS
NABEYA BI-TECH
[Features]
· Thread main body is superior, wear-resistant stainless steel.
· SGPS-PLUses a plastic pad, SGPS-BRL uses a mortise pad.
· Thread sizes from M4 to M12.
· Thread length can be selected
· Tightening without workpiece scratching.
· Grub screw and lever / knob combination products.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 5.94 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Grub screws with ball point
GANTER
Grub screws GN 632.1 with ball point are as a rule used with thrust pads GN 631.
The ball-Ø d2 is smaller than the thread core-Ø, which allows fitting over the ball end.
The combination of grub screws GN 632.1 and thrust pads GN 631 with gripping elements easily makes clamping screws of many different types.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 1.08 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Grub screw with hexagon socket and pointed end DIN 914 / DIN EN ISO 4027 (K0797)
KIPP
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 0.13 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Grub screws, Stainless Steel
GANTER
Stainless-Steel-Grub screws GN 632.5 with ball point are as a rule used with Stainless Steel-Thrust pads GN 631.5.
The ball-Ø d2 is smaller than the thread core-Ø, which allows fitting over the ball end.
The combination of grub screws GN 632.1 and thrust pads GN 631.5 with gripping elements easily makes clamping screws of many different types.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 1.38 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 12.04 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Grub Screws, DIN 6332 with thrust point
HALDER
For combination with thrust pads with snap ring DIN 6311 form S (EH 22560.) and clamping screws DIN 6332.- 3D CAD data available
› Configure nowStarting from∗ ： 0.86 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Thrust pads, Plastic
GANTER
Thrust pads GN 631 are normally combined with ball point grub screws GN 632.1 / GN 632.5 They are easy to press-on to the ball point of the grub screw by hand.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 0.74 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Grub screws with thrust point, blackened
GANTER
The thrust point of these screws DIN 6332 is designed to be used with or without the thrust pad for clamping.
The snap ring resp. spring is a simple and quick method to connect the thrust pad to the grub screw.
Through the combination of grub screws DIN 6332 with various handles or knobs, simple clamping screws can be created.- Volume Discount
› Configure nowStarting from∗ ： 0.84 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Grub Screw _SGP
NABEYA BI-TECH
Tightening without workpiece scratching.
[Features]
· SGP-PL plastic pad, SGP-BR mortise pad.
· Wide range of sizes from M3 to M12 available.
· Thread length can also be selected.
· Tightening without workpiece scratching.
· Main body: SUM22L ferrosoferric black oxide coating, pad: polyacetal (white) [SGE-PL], brass [SGP-BR]- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 2.11 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Thrust Pads, Plastic
HALDER
For combination with ball-headed grub screws EH 22570.- 3D CAD data available
› Configure nowStarting from∗ ： 0.72 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Grub screws with hardened pivot
GANTER
Grub screws GN 913.2 with hardened spherical pivot (Type A) are used in such cases where point contact is required. They are a lower cost alternative to ball point screws GN 605.
Grub screws GN 913.2 with hardened pointed pivot (Type B) offer an alternative form of finish.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 2.30 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Thrust screws (K0389)
KIPP
· For gentle clamping or exerting pressure on threaded spindles, axles and shafts
· Application sectors: machine, fixture and plant construction, material handling, assembly
· Simple assembly- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 0.94 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Grub Screw _SGT
NABEYA BI-TECH
For workpiece clamping use lever / knob etc. assembly.
[Features]
· Use with lever / knob etc. assembly for workpiece clamping.
· Can be used for positioning / stopper etc.
· For use with [STP] [STP-A] [STP-K] as set.
· Produced for grub screw and lever / knob combination use.
· For details refer to lever / knob thread combination service.
· S45CTempered tip (Hardness 50 to 60HRC), tri-iron tetroxide coating (black)- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 3.28 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Bolt with Thrust Pad (BJ746)
IMAO CORPORATION
Swivel tip stop screw. Large round pad is attached to tip. Steel made and SUS versions available.- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 7.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Thrust pads, Stainless Steel
GANTER
Thrust pads GN 631.5 are normally combined with ball point grub screws GN 632.5. They are easy to press-on to the ball point of the grub screw by hand.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 6.38 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Grub screws with ball thrust point (K0391)
KIPP
· Is used together with thrust plate K0933 for clamping
· Material: grade 5.8 steel
· Different thread sizes- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 0.74 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Thrust Pad _STP
NABEYA BI-TECH
[Features]
· Use grub screw SGT as set
· Effective when workpiece surface is tilted etc.
· STPis up to 5°, STP-A and STP-K are up to 12°.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 5.59 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Thrust Pads, DIN 6311 and low model
HALDER
Combinable with grub screws DIN 6332 with thrust point EH 22540.- 3D CAD data available
› Configure nowStarting from∗ ： 1.39 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 3.80 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Levelling feet, Steel
GANTER
Levelling feet GN 6311.4 are normally used when a thread is present at the machine side to adjust the height.
The pin diameter d3 is smaller than the core diameter of the thread, with the effect that the screw can be turned in at the pin. The pressure pin is easily inserted into the plate, with the retaining ring ensuring that the assembly is secure in axial direction.
The static load of the levelling feet GN 6311.4 is limited by the laod capacity of the grub screw (Tensile strength class 5.8). The static load values (only valid for Type OS/KS) in the above table refer to a net vertical load in relation to the ball socket. Under normal operating conditions side loading or angular loading is not uncommon and the load capacity would be considerable reduced which must be taken into consideration.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 16.54 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 1.58 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 4.66 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Grub screws with thrust point DIN 6332 (K0390)
KIPP
· Is used together with thrust plate K0392 for clamping
· Material: steel or stainless steel
· Different thread sizes- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 1.06 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Thrust screws with thrust pad (K0689)
KIPP
· Toggle clamp accessories
· Case-hardened screw pin and thrust pad- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 4.47 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Thrust Pad _SBP
NABEYA BI-TECH
[Features]
· Use grub screw SGB as set
· Made of plastic, and so does not scratch the workpiece.
· Effective where workpiece is not uniform or tilted etc.
· The thrust pad size can be chosen to suit the workpiece.
· Material / finishing polyacetal (matt black)- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 2.32 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Foot plates
GANTER
Foot plates GN 6311.3 are used in connection with screws with pivots (grub screws DIN 6332, tommy screws DIN 6304, DIN 6306).
Owing to the special shape of the immovable retaining ring, the foot plate is easily plugged onto and removed from, the pivot.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 13.68 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Grub screws with thrust point, zinc plated
GANTER
The thrust point of these screws DIN 6332 is designed to be used with or without the thrust pad for clamping.
The snap ring resp. spring is a simple and quick method to connect the thrust pad to the grub screw.
Through the combination of grub screws DIN 6332 with various handles or knobs, simple clamping screws can be created.- Volume Discount
› Configure nowStarting from∗ ： 2.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Thrust pads, Steel
GANTER
Thrust pads DIN 6311 are utilized to transmit clamping forces. They lean to uneven and unparallel surfaces and eliminate the transmission of any screw turning movement to the workpiece.
Hints for installation
The thrust pad has to be held at an angle allowing the circlip to drop to the bottom of its groove with the split end downwards. The thrust pin is then offered up to the split end of the circlip at the lowest possible angle and pressed home.- Volume Discount
› Configure nowStarting from∗ ： 1.98 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 20.18 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 3.74 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Grub Screw _SGB
NABEYA BI-TECH
A set screw that can be used for tightening, positioning, stopping workpieces, etc., and the plastic pad will not damage the workpiece.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 2.77 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Thrust Pad TP-1
KONISHI MFG
For use with grub screw and set. Clamp tip surface area can be enlarged to enable stable, secure clamping.- 2D CAD data available
› Configure nowStarting from∗ ： 7.42 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Grub Screw GS
KONISHI MFG
For use with thrust pad and set. Grub screw thread diameter and length can be selected by preferred size.- 2D CAD data available
› Configure nowStarting from∗ ： 5.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Thrust Pad TP-2
KONISHI MFG
For use with grub screw and set. Clamp tip surface area can be enlarged to enable stable, secure clamping.- 2D CAD data available
› Configure nowStarting from∗ ： 10.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 5.88 € Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Thread Dia. x Pitch |
| Thread Material |
| Pad Material |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KIPP | MISUMI | GANTER | MISUMI | HALDER | GANTER | MISUMI | GANTER | MISUMI | HALDER | NABEYA BI-TECH | GANTER | KIPP | GANTER | MISUMI | HALDER | GANTER | GANTER | NABEYA BI-TECH | HALDER | GANTER | KIPP | NABEYA BI-TECH | IMAO CORPORATION | GANTER | KIPP | NABEYA BI-TECH | HALDER | REYHER | GANTER | GANTER | GANTER | KIPP | KIPP | NABEYA BI-TECH | GANTER | GANTER | GANTER | GANTER | GANTER | NABEYA BI-TECH | KONISHI MFG | KONISHI MFG | KONISHI MFG | REYHER |
| Product Series | Grub screws with hexagon socket and flat point DIN 913 without LONG-LOK (K0707) | Grub screw with hexagon socket and pointed end DIN 914 / DIN EN ISO 4027 (K0797) | |||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
| Starting from∗ | 0.13 € *Unit price with basic configuration | 13.02 € *Unit price with basic configuration Volume Discount | 0.94 € *Unit price with basic configuration Volume Discount | 2.82 € *Unit price with basic configuration Volume Discount | 0.88 € *Unit price with basic configuration | 2.30 € *Unit price with basic configuration Volume Discount | 6.26 € *Unit price with basic configuration Volume Discount | 5.26 € *Unit price with basic configuration Volume Discount | 11.30 € *Unit price with basic configuration Volume Discount | 11.35 € *Unit price with basic configuration | 5.94 € *Unit price with basic configuration Volume Discount | 1.08 € *Unit price with basic configuration Volume Discount | 0.13 € *Unit price with basic configuration | 1.38 € *Unit price with basic configuration Volume Discount | 12.04 € *Unit price with basic configuration Volume Discount | 0.86 € *Unit price with basic configuration | 0.74 € *Unit price with basic configuration Volume Discount | 0.84 € *Unit price with basic configuration Volume Discount | 2.11 € *Unit price with basic configuration Volume Discount | 0.72 € *Unit price with basic configuration | 2.30 € *Unit price with basic configuration Volume Discount | 0.94 € *Unit price with basic configuration | 3.28 € *Unit price with basic configuration Volume Discount | 7.10 € *Unit price with basic configuration | 6.38 € *Unit price with basic configuration Volume Discount | 0.74 € *Unit price with basic configuration | 5.59 € *Unit price with basic configuration Volume Discount | 1.39 € *Unit price with basic configuration | 3.80 € *Unit price with basic configuration Volume Discount | 16.54 € *Unit price with basic configuration Volume Discount | 1.58 € *Unit price with basic configuration Volume Discount | 4.66 € *Unit price with basic configuration Volume Discount | 1.06 € *Unit price with basic configuration | 4.47 € *Unit price with basic configuration | 2.32 € *Unit price with basic configuration Volume Discount | 13.68 € *Unit price with basic configuration Volume Discount | 2.86 € *Unit price with basic configuration Volume Discount | 1.98 € *Unit price with basic configuration Volume Discount | 20.18 € *Unit price with basic configuration Volume Discount | 3.74 € *Unit price with basic configuration Volume Discount | 2.77 € *Unit price with basic configuration Volume Discount | 7.42 € *Unit price with basic configuration | 5.12 € *Unit price with basic configuration | 10.10 € *Unit price with basic configuration | 5.88 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 4 Days | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 4 Days | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 4 Days | Same day | 6 Days | Same day | 4 Days | 6 Days | Same day | Same day | Same day | 7 Days | 7 Days | 4 Days | 4 Days | Same day | 5 Days | 5 Days | Same day | 9 Days | 7 Days | Same day | 6 Days | 6 Days | 6 Days | Same day |
| Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Type | - | - | - | - | Grub Screws | - | - | - | - | Grub Screws | - | - | - | - | - | - | - | - | - | Thrust Pads | - | - | - | - | - | - | - | - | Grub Screw Sets | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Dia. x Pitch | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | M6X1 ～ M20X2.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Material | Steel / Stainless Steel | - | - | - | - | - | - | - | - | - | - | - | Steel / Stainless Steel | - | - | - | - | - | - | - | - | Steel | - | - | - | Steel | - | - | Steel | - | - | - | Steel / Stainless Steel | Steel | - | - | - | - | - | - | - | - | - | - | Steel |
| Pad Material | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Resin | - | - | - | Steel / Stainless Steel | - | - | - | - | Steel | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Steel |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Thread Dia. x Pitch
-
Thread Material
-
Pad Material
Brand
CAD data type
-
- 2D
- 3D
Categories related to Grub Screws
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.