- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
Other Hinges and Hinge Accessory（Page 3）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Corner hinges / screw bolts / steel / GN 129.2 / GANTER
GANTER
Hinges GN 129.2 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 16.98 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Corner hinges, plug-in / internal thread / Zinc / GN 161.1 / GANTER
GANTER
Hinges GN 161.1 are a variant with highly attractive design. The fixing screws are invisible.
During the load tests, the hinges were gradually loaded and relieved at room temperature with incrementally increasing force.
For the specified values, an insignificant permanent deformation remained after relieving the load which had no effect on the function and appearance. In most cases, the failure loads are multiples of the specified value.
The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition.
The user must determine from case to case whether a product is suitable for the intended use. Environmental influences and aging may influence these values.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 9.62 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Hinge base plates / angle / zinc die-cast / 139.4-101 / GANTER
GANTER
The angled mounting plate GN 139.4 allows the hinges GN 139.1 / GN 139.2 to be attached between frame and door, i.e. the door gap.
The long slotted holes allow the attachment to profile
systems.
Countersunk screws for fixing the hinges to the mounting plate are
included part of the order.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 25.04 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Hinge Base Plates / slotted holes / steel / zinc plated / 139.3-170 / GANTER
GANTER
The flat mounting plate GN 139.3 allows the hinges GN 139.1 / GN 139.2 to be attached from the front.
The long slotted holes allow the attachment to profile
s ystems.
Countersunk screws for fixing the hinges to the mounting plate are
included part of the order.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 35.96 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 2.07 € Min. Shipping Days ： 1 Day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 11.26 € Min. Shipping Days ： 1 Day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 0.79 € Min. Shipping Days ： 1 Day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 28.96 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 2.96 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Hinges, aluminium profiles / panel elements, three-part, vertically stretched
GANTER
- Volume Discount
› Configure nowStarting from∗ ： 38.70 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Block hinges with counterbore, long version (K1144)
KIPP
· Connect two fixed components flexibly to each other
· Application sectors: machine construction, furniture construction, doors, hatches, hoods
· Universal left and right application
· For overlying doors
· Version: galvanised steel or high-gloss chromed- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 10.19 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Block hinges with fastening nuts (K1338)
KIPP
· Connect two fixed components flexibly to each other
· Application sectors: machine construction, furniture construction, doors, hatches, hoods
· For flush-mounted constructions
· Light and heavy versions
· Stainless steel 1.4305, 1.4301- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 21.31 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Block hinges with fastening nuts, Form A (K1142)
KIPP
· Connect two fixed components flexibly to each other
· Application sectors: machine construction, furniture construction, doors, hatches, hoods
· For overlying or inlying doors
· For overlying or inlying doors
· Fastening material included- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 8.77 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Block hinges with fastening nuts, long version (K1143)
KIPP
· Connect two fixed components flexibly to each other
· Application sectors: machine construction, furniture construction, doors, hatches, hoods
· Universal left and right application
· For overlying or inlying doors
· Fastening material included- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 11.67 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Connectors with screw fitting, Form A, straight bush (K1498)
KIPP
· Rated up to IP 67
· High temperature range
· With screw lock
· A coded- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 37.78 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Connectors with screw fitting, Form B, angled bush (K1498)
KIPP
· Rated up to IP 67
· High temperature range
· With screw lock
· A coded- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 48.91 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Spring hinges steel or stainless steel 180 mm, spring closed (K1176)
KIPP
· Connect two fixed components flexibly to each other
· Application sectors: machine construction, furniture construction, doors, hatches, hoods
· Material: steel or 1.4301 stainless steel
· Self-closing
· Form B: with holes- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 25.12 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Spring hinges steel or stainless steel 180 mm, spring open (K1176)
KIPP
· Connect two fixed components flexibly to each other
· Application sectors: machine construction, furniture construction, doors, hatches, hoods
· Material: steel or 1.4301 stainless steel
· Self-opening
· Form A: without holes- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 25.12 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Main Body Type |
| Length L *Figure in () is the min length of the adjustable type.(mm) |
| Operating Environment |
| Main Body Material |
| Main Body Surface Treatment |
| Width W(mm) |
| Additional Function |
| Reversed |
| Mounting Method |
| Mounting Screw Hole Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | GANTER | GANTER | GANTER | GANTER | HALDER | HALDER | HALDER | GANTER | GANTER | GANTER | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP | KIPP |
| Product Series | Corner hinges, plug-in / internal thread / Zinc / GN 161.1 / GANTER | Hinge base plates / angle / zinc die-cast / 139.4-101 / GANTER | Hinge Base Plates / slotted holes / steel / zinc plated / 139.3-170 / GANTER | Hinge base plates / internal thread / stainless steel / blank / 25160.07xx / HALDER | Hinges, aluminium profiles / panel elements, three-part, vertically stretched | Connectors with screw fitting, Form A, straight bush (K1498) | Spring hinges steel or stainless steel 180 mm, spring closed (K1176) | Spring hinges steel or stainless steel 180 mm, spring open (K1176) | ||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
| ||||||
| Starting from∗ | 16.98 € *Unit price with basic configuration Volume Discount | 9.62 € *Unit price with basic configuration Volume Discount | 25.04 € *Unit price with basic configuration Volume Discount | 35.96 € *Unit price with basic configuration Volume Discount | 2.07 € *Unit price with basic configuration | 11.26 € *Unit price with basic configuration | 0.79 € *Unit price with basic configuration | 28.96 € *Unit price with basic configuration Volume Discount | 2.96 € *Unit price with basic configuration Volume Discount | 38.70 € *Unit price with basic configuration Volume Discount | 10.19 € *Unit price with basic configuration | 21.31 € *Unit price with basic configuration | 8.77 € *Unit price with basic configuration | 11.67 € *Unit price with basic configuration | 37.78 € *Unit price with basic configuration | 48.91 € *Unit price with basic configuration | 25.12 € *Unit price with basic configuration | 25.12 € *Unit price with basic configuration |
| Min. Shipping Days | 5 Days | 4 Days | 5 Days | 5 Days | 1 Day | 1 Day | 1 Day | 9 Days | 7 Days | 9 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Main Body Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Length L *Figure in () is the min length of the adjustable type.(mm) | 40 ～ 51 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Operating Environment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Main Body Material | Steel | - | - | - | - | - | - | - | - | - | - | Stainless Steel | Stainless Steel / Steel | Stainless Steel / Steel | - | - | Stainless Steel / Steel | Stainless Steel / Steel |
| Main Body Surface Treatment | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Width W(mm) | 45 ～ 61 | 63 | 101 | 170 | - | - | - | - | - | - | 85 | 40.2 ～ 51 | 39 ～ 49 | 40 ～ 51 | - | - | 180 | 180 |
| Additional Function | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Reversed | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Method | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mounting Screw Hole Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Main Body Type
-
Length L *Figure in () is the min length of the adjustable type.(mm)
-
Operating Environment
-
Main Body Material
-
Main Body Surface Treatment
-
Width W(mm)
-
Additional Function
- Not Provided
- With Stopper
- With Catches
- Spring Built-in
-
Reversed
-
Mounting Method
-
Mounting Screw Hole Type
Brand
CAD data type
-
- 2D
- 3D
Categories related to Other Hinges and Hinge Accessory
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.