FRL Units（Drain Cock：Manual）

?* Information on days to ship and prices

• 

  Filter Regulator AW20 to 60-B, Filter Regulator With Backflow Function AW20K to 60K-B

  SMC

  Filter regulators and filter regulators with backflow function, with both filter and regulator integrated in one unit.
  [Features]
  · Helps save on space, and requires less piping.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	32.02 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Stock] Filter Regulator (Modular Standard) W*000 Series

  CKD

  Modular type filter and regulator.
  [Features]
  ・ Compact modularization: Modular design that unifies the main dimensions (width and depth) of each FRL device compactly.
  ・ Assembled dimensions are accurately calculated with a simple calculation.
  ・ The element with long service lifespan incorporates a unique chemical fiber structure that is rough on the surface and becomes finer the further inward it goes.
  ・ Greatly reduced clogs and greatly improved element service lifespan.
  ・ No rust concerns.
  ・ Space saving recessed pressure gauge: Past models had a pressure gauge that stuck out of the front surface, wasting space or being at risk of striking the employees. This recessed design is both clean and an improvement to safety.
  ・ Weight is reduced by 50% (compared to C4000) compared to past models.
  [Applications]
  ・ Clean air, oil-less air, etc. can be supplied depending on the applications and purposes.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	69.21 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  AC10-40-A (FRL), Modular Type, Air Filter + Regulator + Lubricator

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	56.18 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  AW10-40-A, AW Filter / Regulator Combination

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle
  · Without corrosion. The use of a resin body ensures there is no rusting.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	23.69 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  AC10B-40B-A (FRL), Modular Type, Air Filter + Regulator

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	36.69 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Modular Type FRL Combination Standard White Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Compact modularization: Design for each F.R.L device focused on making it more compact. Assembled dimensions are accurately calculated with a simple calculation.
  · Lightweight: The material combination allows for both strength and low weight.
  · Long life element: The elements are constructed from a unique fiber structure that is rough on the surface and becomes finer the further inward it goes (PAT.PEND). Almost no clogs. No rust concerns.
  · Space-saving embedded pressure meter: Past models had a pressure meter that stuck out of the front surface, wasting space or being at risk of striking the employees. This embedded design is both clean and an improvement to safety.
  · Prevents oil drips when reverse pressure is applied such as when residual exhaust valves release pressure.
  · Taking safety into further consideration, this device is equipped with a corrosive resistant plastic bowl.
  · Gauge plug is sealed even here a pipe plug is not installed.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	13 Days

• 

  Modular type filter and regulator standard white series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	14 Days

• 

  AC10A-40A-A (FRL), Modular Type, Filter Regulator + Lubricator

  SMC

  Air Combination Filter Regulator + Lubricator with a bowl that is completely covered by transparent bowl guard.
  [Features]
  · The inside can be seen from all angles (360°).
  · The bowl is protected from the external environment, ensuring high levels of safety.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	44.35 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  AC20-B to AC60-B, Modular Type, Air Filter + Regulator + Lubricator

  SMC

  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.
  & nbspThe inside can be seen from all angles (360°).
  & nbspThe bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  & nbspThe element and bowl are combined into one unit, making it possible to replace the element by hand.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	71.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Modular Type FM Combination Standard White Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.

  2D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	14 Days

• 

  Modular Type WL Combination Standard White Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Its elasticity and flexibility allows it to be used for piping in even tight spaces.
  · TAC duct aluminum can shrink to 1/5 of its length, and TAC duct aluminum 2 can shrink to 1/10 of its length. This allows it to be stored compactly so it does not take up much storage space.
  · Can withstand bending multiple times and is resistant to heat (up to 80°C)

  2D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	14 Days

• 

  Modular Type WM Combination Standard White Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Its elasticity and flexibility allows it to be used for piping in even tight spaces.
  · TAC duct aluminum can shrink to 1/5 of its length, and TAC duct aluminum 2 can shrink to 1/10 of its length. This allows it to be stored compactly so it does not take up much storage space.
  · Can withstand bending multiple times and is resistant to heat (up to 80°C)

  2D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	14 Days

• 

  Modular Reverse Filter Regulator Standard White Series

  CKD

  Boost your system with modularization. Dual element construction provides long life. Note: CAD data of this series is being revised. Please wait till the corrections are done.
  
  [Features]
  · Series featuring built in reverse flow feature, 5μm dust removal, and 0.3μm tar removal

  2D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	14 Days

• 

  Modular Type FRL Combination Standard White Series

  CKD

  Boost your system with modularization. Dual element construction provides long life.
  Choose from over 1000 in stock models, such as those with attached pressure meters, from our website.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	85.15 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Air Combination, Air Filter + Mist Separator + Regulator, AC20C-A to AC40C-A

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	73.35 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  AC20D-40D-A (FRL), Modular Type, Filter Regulator + Mist Separator

  SMC

  SMC modular-type F.R.L. combination unit.
  [Features]
  · Uses a transparent bowl guard.
  · A transparent bowl guard with improved environmental resistance that provides all-round protection.
  · The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
  · Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
  · Superior visibility: 360°
  · The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
  · Weight reduction: reduced by up to 90 g
  · Without corrosion. The use of a resin body ensures there is no rusting.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	61.53 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Mist Separator Regulator AWM20 to 40/Micro Mist Separator Regulator AWD20 to 40

  SMC

  SMC Mist Separator Regulator.
  [Features]
  · The AWM Series combines a regulator and mist separator into one unit. Use for clean air blowing applications. (Filtration: 0.3 μm)
  · The AWD Series combines a regulator and micro-sized mist separator into one unit. Use for ultra-clean air blowing applications. (Filtration: 0.01 μm)

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	60.32 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  AWG20(K)~40(K), Filter Regulator w / Built-in Pressure Gauge

  SMC

  AWG20/30/40 Filter Regulator With Built-In Pressure Gauge that enables installation and removal of pressure gauge cover with a single action.
  [Features]
  Pressure gauge anti-revolving mechanism.
  Panel-cut for pressure gauge not necessary.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	73.65 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  AC20A-B to AC60A-B, Modular Type, Filter Regulator + Lubricator

  SMC

  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.
  & nbspThe inside can be seen from all angles (360°).
  & nbspThe bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  & nbspThe element and bowl are combined into one unit, making it possible to replace the element by hand.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	59.19 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  AC20B-B to AC60B-B, Modular Type, Air Filter + Regulator

  SMC

  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.
  & nbspThe inside can be seen from all angles (360°).
  & nbspThe bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  & nbspThe element and bowl are combined into one unit, making it possible to replace the element by hand.
  · The amount of space required for maintenance has been reduced.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	44.97 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  AC20C-B to AC40C-B, Modular Type, Air Filter + Mist Separator + Regulator

  SMC

  Air combination with better visibility and environmental resistance.
  [Features]
  · The bowl is completely covered by a transparent bowl guard.
  · The inside can be seen from all angles (360°).
  · The bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  · The element and bowl are combined into one unit, making it possible to replace the element by hand.
  · The amount of space required for maintenance has been reduced.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	73.35 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  AC20D-B to AC40D-B, Modular Type, Filter Regulator + Mist Separator

  SMC

  [Features]
  · Improved visibility and environmental resistance.
  · The bowl is completely covered by transparent bowl guard.
  & nbspThe inside can be seen from all angles (360°).
  & nbspThe bowl is completely protected from the external environment, helping improve safety.
  · Easy to work with.
  & nbspThe element and bowl are combined into one unit, making it possible to replace the element by hand.
  · The amount of space required for maintenance has been reduced.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	61.53 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  FFM Combination (Standard Modular Type) C * 070 Series

  CKD

  Boost your system with modularization.
  Dual element construction provides long life.
  [Features]
  ・ Integrated filter and oil mist filter.

  2D CAD data available

  Select to compare

  › Configure now
  Min. Shipping Days ：	19 Days

Loading...