Tightening Fittings（Page 3）

?* Information on days to ship and prices

• 

  Corrosion Resistant SUS316 Tighten Fitting, Bulkhead Straight

  NIHON PISCO

  All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	18.25 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  for Corrosion Resistance - SUS316 Tightening Fitting - Bulkhead Union Straight

  NIHON PISCO

  All materials use SUS316 to provide excellent corrosion resistance.
  
  [Features]
  · SUS316, a substance with superior corrosion resistance, was used in all of the materials.
  · The no-sleeve-required design eliminates issues of forgetting to attach or losing a sleeve.
  · Purified with clean air and packaged in a Class 1000 clean room.
  · Added inch sizes.
  · Wide selection of products.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	23.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Plastic Sleeve

  TAIYO

  A single sleeve unit for reliably sealing tubes.
  
  [Features]
  · A threaded-type pipe fitting which can securely seal tubes using the plastic sleeve.
  · Easy connections.
  · The product consists of three parts including the main body, sleeve and nut. It can be easily attached by inserting the tube into the sleeve and tightening the nut.
  · Available in a wide variety of diameters.
  · A large selection of models is available to fit tube diameters ranging from R1/8 to R1/2.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.77 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SUS316 Fitting Male Connectors

  CHIYODA TSUSHO

  Full decreasing treatment for cleanliness. Male connectors.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	10.57 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  SUS316 Fitting, Male Elbow

  CHIYODA TSUSHO

  Full decreasing treatment for cleanliness. Male elbows.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	17.82 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Hose Fitting, Universal Socket

  CHIYODA TSUSHO

  A cap-nut universal socket with high pull-out strength.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.21 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Hose Fitting, Hose Nipple

  CHIYODA TSUSHO

  A hose nipple with high pull-out strength.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.00 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Hose Fitting, Universal Nipple

  CHIYODA TSUSHO

  A cap-nut universal nipple with high pull-out strength.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.17 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Hose Fitting, Hose Intermediate Fitting

  CHIYODA TSUSHO

  A cap-nut hose intermediate fitting with high pull-out strength.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Tube Fitting Male Threaded Elbow Connector

  KOYO

  Uses cadmium-free brass material.

  Select to compare

  › Configure now
  Starting from∗ ：	5.99 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Tube Fitting Female Threaded Connector

  KOYO

  Uses cadmium-free brass material.

  Select to compare

  › Configure now
  Starting from∗ ：	5.65 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Junron Brass Nipple Joint Tee

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for "pneumatic pipe fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. Each R (PT) screw size has a different colored screw seal.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	4.59 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junlon Brass Fitting, Service Tee

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism clamps onto the tube insert with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.61 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junron Brass Fitting Union Tee

  JUNKOSHA

  [Features]
  · The union tees of the metric Series conform to Japanese Industrial Standard JIS B8381 ‘Pneumatic Fittings’.
  · A mechanism where the tube insert is held and fastened by a sleeve and cap nut to create a secure connection
  · The connection will remain intact until the tube breaks.
  · Equipped with a threaded collar thread by R (PT) thread size.
  · Supports compressed air lines, water pressure, and hydraulic pressure.
  

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.51 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Junron Brass Fitting Bulkhead Female Union

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  Select to compare

  › Configure now
  Starting from∗ ：	5.90 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junlon Brass Fittings - Union Elbow

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for pneumatic fittings. The mechanism clamps on to the tube insert with the sleeve and the cap nut for a reliable connection. With collar thread seal for each R (PT) thread size.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	6.61 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junlon Brass Fittings - Bulkhead Union

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  Select to compare

  › Configure now
  Starting from∗ ：	5.14 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Junlon Brass Fittings - Cap Nut with Guard Wire

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  Select to compare

  › Configure now
  Starting from∗ ：	3.16 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junron Brass Fitting Sleeve (Brass)

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	0.87 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Junlon Brass Fittings - Cap Nut

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism clamps onto the tube insertwith the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	0.65 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Junron Brass Fitting Union

  JUNKOSHA

  Conforms to Japanese Industrial Standards JIS B8381 for pneumatic fittings. The mechanism clamps on to the tube insert with the sleeve and the cap nut for a reliable connection. With collar thread seal for each R (PT) thread size.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	2.54 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Junron Stainless Steel Elbow Fitting

  JUNKOSHA

  Usable across a broad temperature range. Prevents wear to tubing cost by over-tightening of cap nuts and the like. No abnormality in the connected part unless the tube ruptures. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	25.75 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Junron Stainless Fitting Union

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	25.56 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junron Stainless Steel Fitting Union Tee

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nuts, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	49.10 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junron Stainless Fitting Union Elbow

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over tightening of cap nut and the like. No abnormality in the connected part unless the tube ruptures. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	34.13 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Junlon Stainless Steel Fitting Tee

  JUNKOSHA

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	41.34 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junron Stainless Steel Fitting Service Tee

  JUNKOSHA

  Usable across a broad temperature range. Wear on tubing due to over tightening of the cap nut, etc. is eliminated.
  
  [Features]
  · As the product consists of SUS316, which has good corrosion resistance properties, it can be used in a wide temperature range from low to high.
  · Designed specially for fluorine polymer/nylon resin tubes to ensure that the tube does not rupture due to excessive tightening of the cap nut, etc.
  · No abnormalities are allowed in the connected part unless the tube ruptures.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it is rust resistant.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	34.58 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Junlon Stainless Steel Fitting Female Nipple

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of an over tightening of cap nut, etc. No abnormality in the connected part unless the tube is ruptured. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	24.90 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Junlon Stainless Fittings Bulkhead Female Union

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of an over tightening of cap nut, etc. No abnormality in the connected part unless the tube is ruptured. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	25.41 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Junron Stainless Steel Fitting Bulkhead Union

  JUNKOSHA

  Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
  
  [Features]
  · Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
  · Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
  · No abnormality in the connected part unless the tube is ruptured.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it resists rust.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	45.49 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  US2 Series Nipple for Flexible Tubes Made Up of Junlon Stainless Steel

  JUNKOSHA

  [Features]
  ▪ Stainless steel fittings for flexible tubing.
  ▪ To resolve tube twisting during piping, a unique mechanism of cap nuts built into the sleeve can be used.
  · Tightening torque of the cap nut does not need to be managed.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	13.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Junron Stainless Fitting US2 Series Elbow for Flexible Tubes

  JUNKOSHA

  Stainless steel fittings for flexible tubing. To resolve snaking during piping, we use cap nuts built into the sleeve that use a mechanism unique to our company. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	32.54 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Junlon Stainless Steel Fittings - US2 Series Union for Flexible Tube

  JUNKOSHA

  Stainless steel fittings for flexible tubing. To resolve tube twisting during piping, cap nuts built into the sleeve that use the unique Junkosha mechanism are employed. The cap nut tightening torque does not require management.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	34.33 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Junron Stainless Fitting US2 Series Union Tee for Flexible Tubes

  JUNKOSHA

  Stainless steel fittings for flexible tubing. To resolve tube twisting during piping, we use cap nuts built into the sleeve that use a unique Junkosha mechanism. Does not require management of cap nut tightening torque.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	76.18 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Brass) Connector (mm Size)

  NITTA

  It consists of three parts: brass fitting body of connector (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	1.84 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  QuickSeal Series Insertion Type (Brass Specifications) 90° Elbow (mm Size)

  NITTA

  This 90° brass elbow (mm size) consists of three parts: fitting body, nut, and sleeve. The fitting body and insert come integrated. Also, it is superb in negative pressure performance.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	2.90 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Seal Series, Insert Type (Brass Specifications), Tee (mm Size)

  NITTA

  Brass specification tee (millimeter size) fitting includes three components: the main body, , nuts and sleeve(s) in an integrated package. Also features excellent negative pressure performance.
  
  [Features]
  · Screw-in type.
  · Three parts included: fitting body, nuts and sleeve(s).
  · Demonstrates excellent sealing performance.
  · Fitting body and insert are integrated.
  · Also features excellent performance under negative pressure.
  · Only the connectors are sealed.
  · Does not require sealing tape.
  Compliant with JISB8381-1995 (pipe fitting for a flexible hose for pneumatic use)

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.71 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Brass) Service Tee (mm Size)

  NITTA

  It consists of three parts: brass fitting body of service tee (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.76 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Brass) Union Tee (mm Size)

  NITTA

  It consists of three parts: brass fitting body of union tee (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.20 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Seal Series Insert Type (Brass Specifications) Panel Touch Connector (mm Size)

  NITTA

  Three-item system made up of brass specification panel touch connector (mm size) fitting unit, nuts and sleeves, and integrated fitting unit and insert. Excellent negative pressure performance.
  
  [Features]
  · The tube is connected by PushOne®.
  · No need for jigs nor tools to connect the tube.
  · Electroless nickel plated.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · Flame-retardant resin (equivalent to UL94 V-0 standard) adopted.
  · Non-combustible PBT resin is used for the materials.
  · Equivalent to UL94 V-0 standard, with superior self-extinguishing properties.
  · Can be used in environments in which sputtering occurs.
  · The R screws are sealed, and thus there is no need to wrap them with sealing tape.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.89 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Quick Seal Series Brass Sleeve

  NITTA

  [Features] The brass sleeve is sold separately. [Material] Brass (no surface treatment).

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	0.98 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Seal Series, Insert Type (Stainless Steel Specifications), Connector (mm Size)

  NITTA

  A 3-point stainless steel specification connector (mm sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Also demonstrates excellent performance at negative pressures.
  
  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  · Demonstrate excellent sealing performance.
  · Fitting body and insert are integrated.
  · Also has excellent performance with negative pressure.
  · Made of SUS304 for excellent corrosion resistance.
  · Complies with JIS B 8381-1995 (connector for flexible pneumatic hose).

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	7.43 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Seal Series, Insertion Type (Stainless Steel Specifications) 90° Elbow (Sized in Millimeters)

  NITTA

  A 3-point stainless steel 90° elbow (millimeter sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	24.68 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick Seal Series, Insert Type (Stainless Steel Specifications), Tee (mm Size)

  NITTA

  A 3-point stainless steel specification tee (mm sized) with fitting body, nut, and sleeve.
  
  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  ·Excellent sealing performance.
  · Integrated fitting body and insert.
  · Also has excellent performance under negative pressure.
  · Made of SUS304 for excellent corrosion resistance.
  · Complies with JIS B 8381-1995 (connector for flexible pneumatic hose).

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	44.80 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Quick Seal Series, Insertion Type (Stainless Steel Specifications), Union Connector (Sized in Millimeters)

  NITTA

  A 3-point stainless steel specification union connector (sized in millimeters) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Also shows excellent performance at negative pressures.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	63.01 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

Loading...