Vacuum Generators, Vacuum Ejectors（Additional Function：Valves For Vacuum Generation）

?* Information on days to ship and prices

• 

  Vacuum Generator with Pressure Sensor VQ Series

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  Combination type vacuum generator, optimal for controlling large flow rates.
  Pressure sensor specification (30‑mm wide, dual-output, NPN open collector output pressure sensor)

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	230.01 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Vacuum Ejector With Valve And Switch ZM Series

  SMC

  An ejector manufactured by SMC.
  [Features]
  · All-in-one.
  · Capable of manifolding.
  · Maximum suction flow rate increased by 40%.
  · Maximum vacuum pressure -84 kPa.
  · Compact and lightweight.
  · Air-operated type.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	152.89 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  ZK2, Vacuum Unit, Ejector System with Valve

  SMC

  A vacuum unit ejector system manufactured by SMC
  [Features]
  · Built-in digital pressure switch for vacuums, with energy-saving function. Cuts the air supply upon reaching vacuum: Leading to 90% reduction in air consumption
  · Has a 2-stage ejector structure that increases suction flow rate by 50% and reduces air consumption by 30% (compared to SMC's single-stage ejectors)
  · Compact and lightweight, with a 28% reduction in volume (88 cm³) and a 59% reduction in weight (81 g) compared to conventional products
  · Reduced wiring for single units as well as manifolding.
  · Once the supply valve is switched ON, the vacuum generation state is maintained even if the power is cut off. This reduces power consumption.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	194.00 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Vacuum Generator VG, Built-In Vacuum Switch, Supply and Break Valve, Filter and Cable Side Route

  NIHON PISCO

  Makes a unit of a vacuum switch, vacuum break valve, etc. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Makes a unit of a vacuum switch, vacuum break valve, etc., and allows selection of a type suited to the purpose.
  · Makes available 3 types, with a former analog output added to the vacuum switch output specification, a 2‑point switch output, and an inexpensive analog output alone.

  Select to compare

  › Configure now
  Starting from∗ ：	219.17 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Single Unit Type, Straight Type B for Granular / Powder Body Transport

  NIHON PISCO

  Transports small indefinite shaped working material such as granules, powder and fiber.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	48.96 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Single Unit Type, Type B Nipple for Granular / Powder Body Transport

  NIHON PISCO

  Transports small indefinite shaped working material such as granules, powder and fiber. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	52.12 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Single Unit Type, Type A Straight for Granular / Powder Body Transport

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.
  · Transports small indefinite shaped working material such as granules, powder and fiber.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	48.83 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Single Unit Type, Type C Straight for Granular / Powder Body Transport

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.
  · Transports small indefinite shaped working material such as granules, powder and fiber.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	52.93 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Single Unit Type, Type D Straight for Granular / Powder Body Transport

  NIHON PISCO

  Transports small indefinite shaped working material such as granules, powder and fiber. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	53.02 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Single Unit Type, Type A Nipple for Granular / Powder Body Transport

  NIHON PISCO

  Transports small indefinite shaped working material such as granules, powder and fiber. *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	43.23 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Single Unit Type, Type A Union Straight for Granular / Powder Body Transport

  NIHON PISCO

  Transports small indefinite shaped working material such as granules, powder and fiber.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.

  • Volume Discount

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	49.74 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Single Unit Type, Type B Union Straight for Granular / Powder Body Transport

  NIHON PISCO

  *The CAD data for this series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Transports small indefinite shaped working material such as granules, powder and fiber.
  · A vacuum (intake) port and exhaust port are in a single line, and by expelling the working material from the vacuum port through the interior of the vacuum generator VRL, the working material can be transported through the tube.
  · Allows model selection by size and weight of working material.
  · Transports small indefinite shaped working material such as granules, powder and fiber.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	49.84 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Vacuum Generator for Process Gas Ventilation VG Series

  CKD

  -Consumption of supply fluid can be greatly reduced. - The product is resistant to pressure fluctuations on the primary side.

  Select to compare

  › Configure now
  Starting from∗ ：	521.62 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Large Vacuum Unit, Ejector System, ZR Series

  SMC

  A vacuum unit ejector system manufactured by SMC.
  [Features]
  · Large suction flow rate, suitable when used with large-sized pads or multiple pads.
  · Nozzle diameters: ø1.0, ø1.3, ø1.5, ø1.8, ø2.0
  · Vacuum unit suitable for workpieces of 0.5 to 5 kg.
  · Modular design makes it possible to combine functions as required.
  · Safe due to vacuum self-holding function by means of double solenoid valves.
  · Compact and lightweight.
  · Capable of manifolding.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	277.47 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Large Size Vacuum Module: Vacuum Pump System ZR Series

  SMC

  A vacuum module vacuum pump system ideal for use with multiple or large-sized pads.
  [Features]
  · Ideal for use with multiple or large-sized pads.
  · A vacuum module which is suitable for workpieces ranging in size from 0.5 to 5 kg.
  · Modular design makes it possible to combine functions as required.
  · Vacuum self-holding function by means of double solenoid valves ensures safety.
  · Compact and lightweight.
  · Suitable for use in manifolds.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	302.31 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Vacuum Unit, Ejector System, ZX Series

  SMC

  A vacuum unit ejector system best suited to small precision components.
  [Features]
  · Electronic components weighing up to 100 g.
  · Modular design makes it possible to combine the most suitable functions.
  · Compact and lightweight (120 g with complete set), which makes it ideal for installing actuators.
  · Ejector nozzles available in 0.5 to 1.0‑mm diameters (suction flow rate 5 to 22 L/min [ANR]).
  · Capable of manifolding.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	150.89 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Vacuum Unit, Vacuum Pump System, ZK Series

  SMC

  Vacuum unit and vacuum pump system capable of manifolding.
  [Features]
  · Ideal for electronic components and small precision components weighing up to 100 g.
  · Modular design makes it possible to combine the most suitable functions.
  · Compact and lightweight (120 g with complete set), which makes it ideal for installing actuators.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	177.40 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Vacuum / Release Unit VQD1000-V Series

  SMC

  A vacuum/release module that does not require a restrictor circuit for release air.
  [Features]
  · Response speed 13 msec (at 500 mm*).
  · 18.5 msec (at 1,000 mm*).
  *Distance from module to the workpiece.
  · Smooth detachment of workpieces without over-shoot.
  · No workpiece blowout caused by release air.
  · No need to adjust the timing when switching between vacuum and positive pressure (single signal control).
  · N.O. specification (vacuum adhesion type when not energized) and N.C. specification (vacuum shut-off type when not energized) can be selected.

  Select to compare

  › Configure now
  Starting from∗ ：	119.81 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

Loading...