- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
Insert（Sales Unit：Low Quantity (Available beginning with 1 pc.)）
Search by sub-category
Thread Inserts - Tangless
Thread Inserts
Tangless Inserts Installation/Removal Tools
Threaded Inserts Dedicated Tools
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Self-Tapping Inserts / Slotted
MISUMI
It is a split groove threaded insert, threaded on both the inner and outer diameters.
Fasteners that do not require a front force strip to compensate for the mechanical strength of threaded sections made of materials with relatively low strength.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 1.20 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ensat, Slotted Type 302
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
- Stock
› Configure nowStarting from∗ ： 0.39 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)
TOKAI METAL INDUSTRY
A general-purpose well-balanced screw insert with low cost.
[Features]
・ At the time of press-fit, the product has direction.
・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.- Volume Discount
› Configure nowStarting from∗ ： 0.16 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Insert Nitronics 60
RECOIL
Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).- Volume Discount
› Configure nowStarting from∗ ： 2.50 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ultrasert UD2 / UD4 (Brass Cadmium-Free)
TOKAI METAL INDUSTRY
These inserts are the best choice for easy and secure fitment into plastic holes.- Volume Discount
› Configure nowStarting from∗ ： 0.19 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Techlock (SL)
JAPAN DRIVE-IT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8- Volume Discount
› Configure nowStarting from∗ ： 0.22 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 1.00 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tangless Insert
RECOIL
The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.- Volume Discount
› Configure nowStarting from∗ ： 0.47 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ensat Three-Hole / Short 307 Type
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
› Configure nowStarting from∗ ： 0.82 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tangless Inserts Installation / Removal Tools
MISUMI
- Volume Discount
- Stock
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 159.69 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Dodge Bit Insert Flange Type (Brass Cadmium-Free)
TOKAI METAL INDUSTRY
General purpose type. Low cost and well balanced.- Volume Discount
- Stock
› Configure nowStarting from∗ ： 0.28 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Self-Tapping Inserts Installation Tool
MISUMI
Compatible thread inserts are M3, 4, 5, 6, 8, 10 and 12.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 98.03 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Ensat, Type 308, 3-Hole / Long Size
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
› Configure nowStarting from∗ ： 0.93 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 1.84 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ensat, Ultra Coarse Outside Screw, Type 309
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.- Volume Discount
› Configure nowStarting from∗ ： 0.42 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Tool for Inserts Manual Processing 610-Type
KKV
A manual work tool for inserts. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6- Volume Discount
- Stock
› Configure nowStarting from∗ ： 68.11 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Brass Bit Insert (Flanged) / HFB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing› Configure nowStarting from∗ ： 0.39 € Min. Shipping Days ： 19 Days *Unit price with basic configuration
-
Ensat Expanded Slot Type, Model 302, Inch Type
KKV
[Features]
· Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.
· The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.
· If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining.
[Materials]
SUM22L free-cutting steel (equivalent), hexavalent chromate› Configure nowStarting from∗ ： 0.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 29.48 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DODGE BET Insert (Standard), Double Sided Chamfer Type, Brass (Cadmium-Free)
TOKAI METAL INDUSTRY
General purpose type. Low cost and well balanced.- Volume Discount
› Configure nowStarting from∗ ： 0.16 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 88.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Insert, Inconel X-750
RECOIL
The color of the main body will become silver when the method of heat treatment changes.
Not plated. (Inconel Black Recoil)
An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.
[Features]
· Nickel alloy.
· For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.- Volume Discount
› Configure nowStarting from∗ ： 18.06 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flat Head Sonic Lock (Type SHK)
JAPAN DRIVE-IT
[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 3, 4, 5, 6, 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D- Volume Discount
› Configure nowStarting from∗ ： 0.36 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
E-SERT P Type Insertion Tool
TSUGAMI
A general purpose insertion tool that can be used by beginners to perform simple insertion. Available in sizes of M 2.5 mm or larger for coarse and fine threads. Sizes below 8 mm are available for standard thread inserts and locks.› Configure nowStarting from∗ ： 53.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
E-Certs
TSUGAMI
Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.- Volume Discount
› Configure nowStarting from∗ ： 0.65 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Dodge Insert Flange Type (Brass Cadmium-Less)
TOKAI METAL INDUSTRY
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.- Volume Discount
› Configure nowStarting from∗ ： 0.44 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Trade Series Recoil Kit (Milli)
RECOIL
Includes an insertion tool with tap handle functionality. A magnet-type extraction tool has also been set together with this.- Volume Discount
› Configure nowStarting from∗ ： 73.02 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Recoil-Free (mm) SUS304
RECOIL
Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.- Volume Discount
- Stock
› Configure nowStarting from∗ ： 0.33 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Brass, Ensat, Screw Plastic Deformation, Type 305
KKV
Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.- Volume Discount
› Configure nowStarting from∗ ： 0.40 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Ensat, Chip-Free / Short, Type 337
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
› Configure nowStarting from∗ ： 0.87 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Sel Locking Fastener SLN (Non-Lock)
SEL JAPAN
Optimal nut for preventing looseness of vibrating parts, etc. For mounting, press in and tighten with a normal screwdriver. No special tools required.- Volume Discount
› Configure nowStarting from∗ ： 1.48 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Recoil-Free Specialized Size
RECOIL
Recoil, threaded insert, non-recoil special size. [Thread type]Coarse. " Material: EN 1.4301 Equiv. (sintered)- Volume Discount
› Configure nowStarting from∗ ： 1.46 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Iron, Ensat, Small Outside Diameter Slotted Type 303
KKV
Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.- Volume Discount
› Configure nowStarting from∗ ： 0.54 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Brass Sonic Lock (SL Type)
SUNCO
[Nominal M] 2.5, 3, 4
[Material] Brass
[Surface Processing] Bare- Volume Discount
› Configure nowStarting from∗ ： 0.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Sprue Insertion Tool INP M Thread
SUNCO
[Nominal M] 2.2, 2.5, 2.6, 3, 4, 5, 6, 8, 12, 14, 16, 18, 20, 22› Configure nowStarting from∗ ： 60.88 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Insertion Tool Tangless
SUNCO
[nominal size M] 2, 2.5, 3, 4, 5, 6, 8, 10, 12 [thread type] metric (coarse) thread› Configure nowStarting from∗ ： 158.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Brass Bit Insert (Standard, One Sided) / HSB
HIROSUGI-KEIKI
[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing- Volume Discount
› Configure nowStarting from∗ ： 0.30 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 24.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Thread Insert Tang Breaking Tool
MISUMI
Compatible thread inserts range from M2 to M18.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 23.22 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Sprue (Unify) (UNF)
NIPPON SPREW
Screw reinforcer featuring a coiled, diamond-shaped stainless steel thread. Can achieve high-reliability tightening by effective use of the the springback.- Volume Discount
› Configure nowStarting from∗ ： 0.90 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Dodge Bit Insert Standard SD (Brass Cadmium-Less)
TOKAI METAL INDUSTRY
Because it is an extension method, it can be used during press fitting insertion after molding with the thinnest possible wall thickness.- Volume Discount
› Configure nowStarting from∗ ： 0.39 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Recoil Tap
RECOIL
[Features]
· Recoil taps differ from ordinary taps, designed for exclusive use with screw thread inserts (STI). They have a large diameter but the same pitch as a standard tap in order to accommodate the Recoil Inserts.
· Recoil Taps are manufactured to precise standards from High Speed steel (HSS or HSS-E) with ground threads and are available in Intermediate and Bottoming leads.
· In addition to hand taps, Spiral Point and Spiral Flute machine taps are also available for mass production purposes. In addition, for all spark plug applications pilot nose taps are available, which do not require a special recoil drill. The Recoil thread inserts when installed into a correctly tapped hole will provide the applicable internal thread tolerance for the installed bolt.
· Intermediate tap...The most commonly used tap, mainly used for through hole applications. 4 -thread lead.
· Bottoming tap...Used when tapping to the bottom of a blind hole. 2-Thread lead, and is normally used after a taper tap or intermediate tap.- Volume Discount
› Configure nowStarting from∗ ： 19.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Insert SUS316
RECOIL
An insert for corrosion resistance and non-magnetic applications (Helisert and sprue).- Volume Discount
› Configure nowStarting from∗ ： 0.40 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Sparrow (Type SP)
JAPAN DRIVE-IT
[Type] Press Fit Use
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2- Volume Discount
› Configure nowStarting from∗ ： 0.30 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Screwsert (Type SCT)
JAPAN DRIVE-IT
[Type] Self-tapping Used
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3, 4, 5, 6, 8, 10, Length (following insertion)
[L](D = screw diameter M) 2D 2.5D
[Length] B (mm) 6.0 8.0 10.0 14.0 15.0 18.0- Volume Discount
› Configure nowStarting from∗ ： 0.98 € Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Application |
| Material |
| Screw Type |
| Screw Dia. M (after insertion)(mm) |
| Thread Dia. (After inserted), Unified(inch) |
| Length L (after insertion) (D = Thread Dia. M) |
| Notch |
| Shape |
| Sales Unit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | KKV | TOKAI METAL INDUSTRY | RECOIL | TOKAI METAL INDUSTRY | JAPAN DRIVE-IT | MISUMI | RECOIL | KKV | MISUMI | TOKAI METAL INDUSTRY | MISUMI | KKV | MISUMI | KKV | KKV | HIROSUGI-KEIKI | KKV | MISUMI | TOKAI METAL INDUSTRY | MISUMI | RECOIL | JAPAN DRIVE-IT | TSUGAMI | TSUGAMI | TOKAI METAL INDUSTRY | RECOIL | RECOIL | KKV | KKV | SEL JAPAN | RECOIL | KKV | SUNCO | SUNCO | SUNCO | HIROSUGI-KEIKI | MISUMI | MISUMI | NIPPON SPREW | TOKAI METAL INDUSTRY | RECOIL | RECOIL | JAPAN DRIVE-IT | JAPAN DRIVE-IT |
| Product Series | DODGE BET Insert (Standard), Double Sided Chamfer Type, Brass (Cadmium-Free) | ||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||
| Starting from∗ | 1.20 € *Unit price with basic configuration Volume Discount | 0.39 € *Unit price with basic configuration Volume Discount | 0.16 € *Unit price with basic configuration Volume Discount | 2.50 € *Unit price with basic configuration Volume Discount | 0.19 € *Unit price with basic configuration Volume Discount | 0.22 € *Unit price with basic configuration Volume Discount | 1.00 € *Unit price with basic configuration Volume Discount | 0.47 € *Unit price with basic configuration Volume Discount | 0.82 € *Unit price with basic configuration Volume Discount | 159.69 € *Unit price with basic configuration Volume Discount | 0.28 € *Unit price with basic configuration Volume Discount | 98.03 € *Unit price with basic configuration Volume Discount | 0.93 € *Unit price with basic configuration Volume Discount | 1.84 € *Unit price with basic configuration Volume Discount | 0.42 € *Unit price with basic configuration Volume Discount | 68.11 € *Unit price with basic configuration Volume Discount | 0.39 € *Unit price with basic configuration | 0.81 € *Unit price with basic configuration | 29.48 € *Unit price with basic configuration Volume Discount | 0.16 € *Unit price with basic configuration Volume Discount | 88.45 € *Unit price with basic configuration Volume Discount | 18.06 € *Unit price with basic configuration Volume Discount | 0.36 € *Unit price with basic configuration Volume Discount | 53.69 € *Unit price with basic configuration | 0.65 € *Unit price with basic configuration Volume Discount | 0.44 € *Unit price with basic configuration Volume Discount | 73.02 € *Unit price with basic configuration Volume Discount | 0.33 € *Unit price with basic configuration Volume Discount | 0.40 € *Unit price with basic configuration Volume Discount | 0.87 € *Unit price with basic configuration Volume Discount | 1.48 € *Unit price with basic configuration Volume Discount | 1.46 € *Unit price with basic configuration Volume Discount | 0.54 € *Unit price with basic configuration Volume Discount | 0.34 € *Unit price with basic configuration Volume Discount | 60.88 € *Unit price with basic configuration | 158.73 € *Unit price with basic configuration | 0.30 € *Unit price with basic configuration Volume Discount | 24.57 € *Unit price with basic configuration Volume Discount | 23.22 € *Unit price with basic configuration Volume Discount | 0.90 € *Unit price with basic configuration Volume Discount | 0.39 € *Unit price with basic configuration Volume Discount | 19.44 € *Unit price with basic configuration Volume Discount | 0.40 € *Unit price with basic configuration Volume Discount | 0.30 € *Unit price with basic configuration Volume Discount | 0.98 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | Same day | 5 Days | Same day | 5 Days | Same day | Same day | Same day | Same day | 19 Days | 6 Days | 5 Days | Same day | 5 Days | 5 Days | 6 Days | 6 Days | Same day | Same day | 6 Days | Same day | Same day | Same day | 6 Days | Same day | Same day | 6 Days | 6 Days | 6 Days | Same day | 5 Days | 5 Days | 6 Days | Same day | 6 Days | Same day | Same day | Same day |
| Specifications |
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
| Type | Self-Tapping | Self-Tapping | Standard | Standard | Standard | Press Fit | Standard | Tangless | Self-Tapping | Tool | Standard | Tool | Self-Tapping | Tangless | Self-Tapping | Tool | Press Fit | Self-Tapping | Tool | Standard | Tool | Standard | Press Fit | Tool | Standard | Standard | Tool | Standard | Self-Tapping | Self-Tapping | Swaged | Standard | Self-Tapping | Press Fit | Tool | Tool | Press Fit | Tool | Tool | Standard | Standard | Tool | Standard | Press Fit | Self-Tapping |
| Application | Light Metal | - | Resin General | Light Metal | Resin General | - | Light Metal | Light Metal | - | - | Resin General | - | - | Light Metal | - | - | Light Metal | - | - | Resin General | - | Light Metal / Cast Iron | - | - | Light Metal / Cast Iron / Resin General | Resin General | - | Light Metal | - | - | Light Metal | Light Metal | - | - | - | - | Light Metal | - | - | Light Metal | Resin General | - | Light Metal | Resin General | Resin General |
| Material | Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.) / Brass | Brass | Nitrox 60 | Brass | Brass | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.) | - | Brass | - | Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.) | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Brass | Steel | Brass | Steel | - | Brass | - | Inconel X-750 | Brass | Steel | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Brass | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Brass | Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.) | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Steel | Brass | - | - | Brass | - | - | Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) | Brass | - | Stainless (EN 1.4401 Equiv.) | Brass | Brass |
| Screw Type | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread / Metric (Fine) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | Metric (Coarse) Thread | - | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Unified (Coarse) Thread / BSW (Coarse) Thread | - | Metric (Coarse) Thread | - | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread | - | - | Unified (Fine) Thread | Metric (Coarse) Thread | - | Metric (Coarse) Thread | Metric (Coarse) Thread | Metric (Coarse) Thread |
| Screw Dia. M (after insertion)(mm) | 3 ～ 12 | 2.5 ～ 30 | 1.6 ～ 8 | 3 ～ 12 | 2 ～ 8 | 2 ～ 10 | 3 ～ 16 | 2.5 ～ 12 | 3 ～ 16 | - | 2 ～ 8 | - | 3 ～ 16 | 2.5 ～ 10 | 3 ～ 16 | 2.5 ～ 16 | 3 | - | - | 1.4 ～ 5 | - | 3 ～ 12 | 2 ～ 8 | 3 ～ 10 | 2 ～ 24 | 2.6 ～ 6 | 2 ～ 20 | 2 ～ 42 | 3 ～ 6 | 3 ～ 12 | 4 | 3 ～ 10 | 3 ～ 10 | 2.5 | 2.2 ～ 20 | 2 ～ 12 | 3 ～ 4 | - | - | - | 2.6 ～ 8 | 2 ～ 16 | 3 ～ 16 | 2 ～ 6 | 3 ～ 8 |
| Thread Dia. (After inserted), Unified(inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2 ～ No. 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | #10-32 | - | - | - | - | - |
| Length L (after insertion) (D = Thread Dia. M) | - | - | 1D / 1.5D / 2D / 2.5D / 3D | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D | 1D / 1.5D / 2D / 3D | 1D / 1.5D / 2D | - | - | 1D / 1.5D / 2D / 2.5D / 3D | - | - | 1D / 1.5D / 2D | - | - | 1.5D | - | - | 1D / 1.5D / 2D / 2.5D | - | 1D / 1.5D / 2D | 1.5D / 2D | - | 1D / 1.5D / 2D / 2.5D / 3D / 0.5D | 1.5D / 2D / 2.5D | - | 1D / 1.5D / 2D / 2.5D / 3D | - | - | - | 0.5D / 0.8D | - | - | - | - | 1D / 1.5D | - | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D / 2.5D / 3D | - | 1D / 1.5D / 2D | 1D / 1.5D / 2D | 2D / 2.5D |
| Notch | Not Provided | - | Not Provided | Provided | Not Provided | Not Provided | Provided | Not Provided | - | - | Not Provided | - | - | Not Provided | - | Not Provided | Not Provided | Not Provided | - | Not Provided | - | Provided | Not Provided | - | Provided | Not Provided | - | Provided | - | - | Not Provided | Provided | - | Not Provided | - | - | Not Provided | - | - | Provided | Not Provided | - | Provided | Not Provided | Not Provided |
| Shape | Slotted | Slotted | Standard | - | Standard | Standard | - | - | 3-Hole Type | - | Standard | - | 3-Hole Type | - | Standard | - | Standard | Slotted | - | Standard | - | - | Standard | - | - | Standard | - | - | Standard | Tip Free Type | - | - | Small O.D. Slotted Type | Standard | - | - | Standard | - | - | - | Standard | - | - | Standard | Standard |
| Sales Unit | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) | Low Quantity (Available beginning with 1 pc.) |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Application
- Light Metal
- Cast Iron
- Resin General
-
Material
- Steel
- Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)
- Stainless (EN 1.4401 Equiv.)
- Stainless Steel (EN 1.4016 Equiv.)
- Brass
- Phosphor Bronze
- Inconel X-750
- Nitrox 60
- Aluminum
- Nylon
- Stainless steel
- Stainless Steel
-
Screw Type
- Metric (Coarse) Thread
- Metric (Fine) Thread
- Unified (Coarse) Thread
- Unified (Fine) Thread
- BSW (Coarse) Thread
-
Screw Dia. M (after insertion)(mm)
-
Thread Dia. (After inserted), Unified(inch)
-
Length L (after insertion) (D = Thread Dia. M)
-
Notch
-
Shape
-
Sales Unit
Brand
-
- SUNCO (20)
- RECOIL (17)
- KKV (9)
- TSUGAMI (7)
- TOKAI METAL INDUSTRY (6)
- NIPPON SPREW (5)
- JAPAN DRIVE-IT (4)
- HIROSUGI-KEIKI (2)
- SEL JAPAN (2)
- GANTER (0)
- KS SANGYO (0)
- BOHSEI (0)
- ACCURATE (0)
- ESCO (0)
- REYHER (0)
- KIPP (0)
CAD data type
-
- 2D
- 3D
Categories related to Insert
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.