Locating pins

MISUMI locating pins are an economical alternative to application-specific in-house production. There are no freight costs (within Germany), no minimum quantity surcharge and there are comparatively short delivery times, which is especially useful when ordering small quantities of locating pins.

MISUMI locating pins

The in-house production of application-specific locating pins cannot begin until a technical drawing is created, production planning has taken place and the machinery has been prepared - this applies if you need a hundred locating pins or even just one. If, for example, you need two different types of locating pins for a certain application, it will generally take about 20 working days until they have been manufactured and can be installed. If the designer chooses MISUMI and orders via the online shop, they will save 60% of the time needed and up to 65% of the cost. Our drawings are automatically generated using specific properties and are promptly available as 3D or 2D CAD data. Ordering is completed after a few clicks and a couple of days later your customised locating pins will be delivered. Ordering small quantities is still great value since MISUMI does not pay freight costs or levy a minimum quantity surcharge but still delivers quicker than the competition. Batch orders within the discount scale feature reduced prices and short delivery times.

Locating pins can be freely configured

Individually configuring locating pins is very straight forward: First of all, the user selects a basic shape: In addition to the standard version, MISUMI also provides locating pins with either internal or external thread as well as adjusting screws with circular groove, notch or flat design. Seven basic conical and spherical shapes are available for the shape of the guidance component. The shape of the pin body can either be round or have a rhombic cross-section, a large or small head or locating pins with or without a stepped end. The client can then choose the material, the surface treatment, hardness and a type number. Then a decision has to be made on the parameters to be configured.

MISUMI offers three basic versions, whose head diameter can be configured to between 1 to 30mm in 0.01mm increments:

  • Choose from a product portfolio with pre-set head diameters, standard lengths and pin diameters
  • Free choice of head diameter with predetermined head and pin lengths and pin diameters
  • Head diameter/length and pin length can be freely configured

Once the user has selected the desired locating pin, they will immediately see the prices per unit and delivery times in the online version of the MISUMI catalogue.

Video - Workholding methods and manufacturing products

In order to ensure that a workpiece is held securely and won’t shift during machining or processing, a workholding assembly needs to prevent movement in 12 different directions, or Degrees of Freedom. Learn in this video about the various uses of workholding units.

Important information: Products of third-party suppliers (non MISUMI products) with a lead time of 4 days or less can be cancelled within 2 hours after order placement. Please refer to our cancellation policy and T&C for further details.