Ejector sleeves / steel / stepped / small wall thickness / length configurable / concentricity 0.005

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
ESVF2.5-[40-70/0.01]-P[1.8-2.5/0.01]-V[0.8-1.6/0.01]-N[20-60/1]-S[1-4.5/0.5]
ESVF3-[40-125/0.01]-P[1.8-2.95/0.01]-V[0.8-2.1/0.01]-N[20-115/1]-S[1-6/0.5]
ESVF3.5-[40-125/0.01]-P[1.8-3.45/0.01]-V[0.8-2.6/0.01]-N[20-115/1]-S[1-7.5/0.5]
ESVF4-[40-125/0.01]-P[1.9-3.95/0.01]-V[0.8-3.1/0.01]-N[20-115/1]-S[1-9/0.5]
ESVF4.5-[40-125/0.01]-P[2.65-4.45/0.01]-V[1.1-3.6/0.01]-N[20-115/1]-S[1-10.5/0.5]
ESVF5-[40-125/0.01]-P[2.65-4.95/0.01]-V[1.2-4.1/0.01]-N[20-115/1]-S[1-12/0.5]
ESVF5.5-[40-125/0.01]-P[2.65-5.45/0.01]-V[1.2-4.6/0.01]-N[20-115/1]-S[1-13.5/0.5]
ESVF6-[40-150/0.01]-P[2.9-5.95/0.01]-V[1.6-5.1/0.01]-N[20-140/1]-S[1-15/0.5]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSD (Shaft diameter)
(mm)
P (Tip diameter)
(mm)
V (Hole diameter)
(mm)
L (L dimension)
(mm)
N
(mm)
S (V hole diameter length)
(mm)
1 Quote 102.51.8 ~ 2.50.8 ~ 1.640 ~ 7020 ~ 601 ~ 4.5
1 Quote 1031.8 ~ 2.950.8 ~ 2.140 ~ 12520 ~ 1151 ~ 6
1 Quote 103.51.8 ~ 3.450.8 ~ 2.640 ~ 12520 ~ 1151 ~ 7.5
1 Quote 1041.9 ~ 3.950.8 ~ 3.140 ~ 12520 ~ 1151 ~ 9
1 Quote 104.52.65 ~ 4.451.1 ~ 3.640 ~ 12520 ~ 1151 ~ 10.5
1 Quote 1052.65 ~ 4.951.2 ~ 4.140 ~ 12520 ~ 1151 ~ 12
1 Quote 105.52.65 ~ 5.451.2 ~ 4.640 ~ 12520 ~ 1151 ~ 13.5
1 Quote 1062.9 ~ 5.951.6 ~ 5.140 ~ 15020 ~ 1401 ~ 15

Loading...

  1. 1

Basic information

Product composition Single sleeve Material SKH51 Surface treatment No
Head thickness 4mm(T4) Concentricity ◎0.005 Boring method Grinding
Inner dia. tolerance +0.005/0 Tapered or not No Shaft diameter tolerance 0/-0.005
Technical Standard JIS

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360