- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
Core pins / head form selectable / HSS / machined end face
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| CPH-5LB1-[50-200/0.01] |
| CPH-5LB1.5-[50-250/0.01] |
| CPH-5LB2-[50-250/0.01] |
| CPH-5LB2.5-[50-250/0.01] |
| CPH-5LB3-[50-300/0.01] |
| CPH-5LB3.5-[50-300/0.01] |
| CPH-5LB4-[50-300/0.01] |
| CPH-5LB4.5-[50-300/0.01] |
| CPH-5LB5-[50-350/0.01] |
| CPH-5LB5.5-[50-350/0.01] |
| CPH-5LB6-[50-350/0.01] |
| CPH-5LB6.5-[50-350/0.01] |
| CPH-5LB7-[50-350/0.01] |
| CPH-5LB8-[50-350/0.01] |
| CPH-5LB9-[50-350/0.01] |
| CPH-5LB10-[50-350/0.01] |
| CPH-5LB12-[50-350/0.01] |
| CPHE-5LB1-[50-200/0.01] |
| CPHE-5LB1.5-[50-250/0.01] |
| CPHE-5LB2-[50-250/0.01] |
| CPHE-5LB2.5-[50-250/0.01] |
| CPHE-5LB3-[50-300/0.01] |
| CPHE-5LB3.5-[50-300/0.01] |
| CPHE-5LB4-[50-300/0.01] |
| CPHE-5LB4.5-[50-300/0.01] |
| CPHE-5LB5-[50-350/0.01] |
| CPHE-5LB5.5-[50-350/0.01] |
| CPHE-5LB6-[50-350/0.01] |
| CPHE-5LB6.5-[50-350/0.01] |
| CPHE-5LB7-[50-350/0.01] |
| CPHE-5LB8-[50-350/0.01] |
| CPHE-5LB9-[50-350/0.01] |
| CPHE-5LB10-[50-350/0.01] |
| CPHE-5LB12-[50-350/0.01] |
| CPHJ-5LB4-[50-300/0.01] |
| CPHJ-5LB4.5-[50-300/0.01] |
| CPHJ-5LB5-[50-350/0.01] |
| CPHJ-5LB5.5-[50-350/0.01] |
| CPHJ-5LB6-[50-350/0.01] |
| CPHJ-5LB6.5-[50-350/0.01] |
| CPHJ-5LB7-[50-350/0.01] |
| CPHJ-5LB8-[50-350/0.01] |
| CPHJ-5LB9-[50-350/0.01] |
| CPHJ-5LB10-[50-350/0.01] |
| CPHJ-5LB12-[50-350/0.01] |
| CPHJE-5LB4-[50-300/0.01] |
| CPHJE-5LB4.5-[50-300/0.01] |
| CPHJE-5LB5-[50-350/0.01] |
| CPHJE-5LB5.5-[50-350/0.01] |
| CPHJE-5LB6-[50-350/0.01] |
| CPHJE-5LB6.5-[50-350/0.01] |
| CPHJE-5LB7-[50-350/0.01] |
| CPHJE-5LB8-[50-350/0.01] |
| CPHJE-5LB9-[50-350/0.01] |
| CPHJE-5LB10-[50-350/0.01] |
| CPHJE-5LB12-[50-350/0.01] |
| Part Number | Minimum order quantity | Volume Discount | RoHS | Head thickness | Shaft diameter tolerance | D/P (Shaft diameter) (mm) | Tip shape | Applicable ejector sleeves inner diameter tolerance | C (C chamfering width on the tip) (mm) | K (Taper angle) (°) | L (L dimension) (mm) | R (Tip R chamfering) (mm) | S (Tip tapered width) (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Quote | 10 | 4mm(T4) | 0/-0.005 | 1 | B | - | - | - | 50 ～ 200 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | 0/-0.005 | 1.5 | B | - | - | - | 50 ～ 250 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | 0/-0.005 | 2 | B | - | - | - | 50 ～ 250 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | 0/-0.005 | 2.5 | B | - | - | - | 50 ～ 250 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | 0/-0.005 | 3 | B | - | - | - | 50 ～ 300 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | 0/-0.005 | 3.5 | B | - | - | - | 50 ～ 300 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | 0/-0.005 | 4 | B | - | - | - | 50 ～ 300 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | 0/-0.005 | 4.5 | B | - | - | - | 50 ～ 300 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | 0/-0.005 | 5 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | 0/-0.005 | 5.5 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | 0/-0.005 | 6 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | 0/-0.005 | 6.5 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | 0/-0.005 | 7 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | 0/-0.005 | 8 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | 0/-0.005 | 9 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | 0/-0.005 | 10 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | 0/-0.005 | 12 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 1 | B | +0.01/0 or H7 | - | - | 50 ～ 200 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 1.5 | B | +0.01/0 or H7 | - | - | 50 ～ 250 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 2 | B | +0.01/0 or H7 | - | - | 50 ～ 250 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 2.5 | B | +0.01/0 or H7 | - | - | 50 ～ 250 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 3 | B | +0.01/0 or H7 | - | - | 50 ～ 300 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 3.5 | B | +0.01/0 or H7 | - | - | 50 ～ 300 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 4 | B | +0.01/0 or H7 | - | - | 50 ～ 300 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 4.5 | B | +0.01/0 or H7 | - | - | 50 ～ 300 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 5 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 5.5 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 6 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 6.5 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 7 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 8 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 9 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 10 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 4mm(T4) | -0.01/-0.02 | 12 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | 0/-0.005 | 4 | B | - | - | - | 50 ～ 300 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | 0/-0.005 | 4.5 | B | - | - | - | 50 ～ 300 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | 0/-0.005 | 5 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | 0/-0.005 | 5.5 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | 0/-0.005 | 6 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | 0/-0.005 | 6.5 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | 0/-0.005 | 7 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | 0/-0.005 | 8 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | 0/-0.005 | 9 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | 0/-0.005 | 10 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | 0/-0.005 | 12 | B | - | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 4 | B | +0.01/0 or H7 | - | - | 50 ～ 300 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 4.5 | B | +0.01/0 or H7 | - | - | 50 ～ 300 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 5 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 5.5 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 6 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 6.5 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 6mm(JIS) | -0.01/-0.02 | 7 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 | 8 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 | 9 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 | 10 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - | ||
| 1 | Quote | 10 | 8mm(JIS) | -0.01/-0.02 | 12 | B | +0.01/0 or H7 | - | - | 50 ～ 350 | - | - |
Loading...
Basic information
| Material | SKH51 | Surface treatment | No | With/without cooling hole | No |
|---|
Configure
Basic Attributes
-
Head thickness
- 4mm(T4)
- 6mm(JIS)
- 8mm(JIS)
-
Shaft diameter tolerance
- 0/-0.005
- -0.01/-0.02
-
D/P (Shaft diameter)(mm)
-
Applicable ejector sleeves inner diameter tolerance
- +0.01/0 or H7
-
C (C chamfering width on the tip)(mm)
-
K (Taper angle)(°)
-
L (L dimension)(mm)
-
R (Tip R chamfering)(mm)
-
S (Tip tapered width)(mm)
-
Type
- CPH-5LB
- CPH-5LC
- CPH-5LG
- CPH-5LR
- CPH-5LT
- CPHE-5LB
- CPHE-5LC
- CPHE-5LG
- CPHE-5LR
- CPHE-5LT
- CPHJ-5LB
- CPHJ-5LC
- CPHJ-5LG
- CPHJ-5LR
- CPHJ-5LT
- CPHJE-5LB
- CPHJE-5LC
- CPHJE-5LG
- CPHJE-5LR
- CPHJE-5LT
-
Tip shape
- C
- G
- T
- R
- B
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.