Ejector sleeves / steel / stepped / length configurable / concentricity 0.005

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
ESVFX3-[100-150/0.01]-P[2.5-3/0.01]-V[1-1.5/0.01]-N[50-120/1]-S[2-4/1]
ESVFX4-[100-150/0.01]-P[3-4/0.01]-V[1-2/0.01]-N[50-120/1]-S[2-6/1]
ESVFX5-[100-200/0.01]-P[3.5-5/0.01]-V[1-3/0.01]-N[50-170/1]-S[2-9/1]
ESVFX6-[100-200/0.01]-P[4.5-6/0.01]-V[1-4/0.01]-N[50-170/1]-S[2-12/1]
ESVFX7-[100-200/0.01]-P[5.5-7/0.01]-V[1-5/0.01]-N[50-170/1]-S[2-15/1]
ESVFX8-[100-200/0.01]-P[6.5-8/0.01]-V[1-6/0.01]-N[50-170/1]-S[2-18/1]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSD/P (Shaft diameter)
(mm)
V (Hole diameter)
(mm)
P (Tip diameter)
(mm)
L (L dimension)
(mm)
N
(mm)
S (V hole diameter length)
(mm)
1 Quote 1031 ~ 1.52.5 ~ 3100 ~ 15050 ~ 1202 ~ 4
1 Quote 1041 ~ 23 ~ 4100 ~ 15050 ~ 1202 ~ 6
1 Quote 1051 ~ 33.5 ~ 5100 ~ 20050 ~ 1702 ~ 9
1 Quote 1061 ~ 44.5 ~ 6100 ~ 20050 ~ 1702 ~ 12
1 Quote 1071 ~ 55.5 ~ 7100 ~ 20050 ~ 1702 ~ 15
1 Quote 1081 ~ 66.5 ~ 8100 ~ 20050 ~ 1702 ~ 18

Loading...

  1. 1

Basic information

Product composition Single sleeve Material SKH51 Surface treatment No
Head thickness 4mm(T4) Shaft diameter tolerance 0/-0.005 Concentricity between the hole and shaft diameters ◎0.005
Boring method Grinding Inner dia. tolerance +0.005/0 Tapered or not Yes
Center pin tip shape No Technical Standard JIS

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360