Linear shafts / steel / surface hardened, nickel plated / end forms selectable

Linear shafts / steel / surface hardened, nickel plated / end forms selectable

Click on this image to zoom in.

Click on this image to zoom in.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Ends Threaded/Tapped/Stepped/Fully Plated:Related Image
L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.111
Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm).
Shafts may have centering holes at end faces depending on shapes.

TypeD Tol.MaterialHardnessSurface Treatment
SolidOne End TappedOne End Stepped and TappedOne End ThreadedOne End Threaded with O.D. same as Shaft O.D.
PSFCJPSFCTPSFCGPSFCNPSFCQg6EN 1.3505 Equiv.Effective Hardened Depth of Induction Hardening >> P.112
58HRC~
Electroless Nickel Plating

Specifications

Part Number-L-F-B-P-M
PSFCJ20-75
 
 
 
 
PSFCT20-525
 
 
 -M8
PSFCG20-400-F25
 -P16-M10
PSFCN20-950-F50-B30-P10
 
PSFCQ12-500
 -B20
 
 
■Solid Type, One End Tapped Type, One End Stepped and Tapped Type
Part Number1mm IncrementSelection(Y)Max.RC
TypeDL (Solid / One End Tapped)L (One End Stepped and Tapped)FPM (One End Tapped)M (One End Stepped and Tapped)
Solid Type
PSFCJ

One End Tapped
PSFCT

One End Stepped and Tapped
PSFCG
820~ 80025~7982≤F≤Px46345        3          8000.3 or Less0.5 or Less
1020~ 80025~7986~ 83456       345        800
1220~100025~9986~10 4568      3456       1000
1525~100025~9986~13 456810     3456810     1000
2030~100025~9986~17 45681012     45681012    10001.0 or Less
2535~100025~9988~22 4568101216    4568101216   1000
3035~100025~9989~27   6810121620    56810121620  1000
3535~100025~9989~32    81012162024   5681012162024 10000.5 or Less
4050~100025~99811~37     101216202430   681012162024301000
5065~100025~99811~47      1216202430   681012162024301000
• One End Tapped Type When Mx2.5+4≥L, tap pilot holes may go through. • One End Stepped and Tapped
P≥M+3 When Mx2.5+4≥Y, tap pilot holes may go through.

■One End Threaded
Part Number1mm IncrementP
Selection
(Y)Max.RC
TypeDLFB
One End Threaded
PSFCN
825~7982≤F≤Px5(When P≤6)
B≤F-2

(When P=8, 10)
B≤F-3

(P≥12)
B≤F-5

B≥Pitchx3
3456       8000.3 or Less0.5 or Less
1025~798 4568      800
1225~998  56810     1000
1525~998  5681012    10001.0 or Less
2025~998   68101216   1000
2525~998    81012162024 1000
3025~998    81012162024 1000
3525~998     10121620243010000.5 or Less
4025~998      12162024301000
5025~998       162024301000

Coarse Thread Dimension
MPitch
30.5
40.7
50.8
61.0
81.25
101.5
121.75
162.0
202.5
243.0
303.5

■One End Threaded with O.D. same as Shaft O.D.
Part Number1mm IncrementM(Y)Max.RC
TypeDLB
One End Threaded with O.D. same as Shaft O.D. PSFCQ825~7937~4088000.3 or Less0.5 or Less
1025~7958~5010800
1225~9919~60121000
2025~98713~1002010001.0 or Less
3025~98218~150301000
For shafts with O.D. same as Shaft O.D., L dimension has priority, thus the effective thread length will be B-(Pitchx2).

Alterations

Ends Threaded/Tapped/Stepped/Fully Plated:Related Image

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
PSFCG8-[25-800/1]-F[2-24/1]-P6-M3
PSFCG10-[25-800/1]-F[2-32/1]-P[6-8/1]-M[3,​4,​5]
PSFCG12-[25-1000/1]-F[2-40/1]-P[6-10/1]-M[3,​4,​5,​6]
PSFCG15-[25-1000/1]-F[2-52/1]-P[6-13/1]-M[3,​4,​5,​6,​8,​10]
PSFCG15-[25-1000/1]-F[2-52/1]-P[6-13/1]-MSC8
PSFCG20-[25-1000/1]-F[2-68/1]-P[6-17/1]-M[4,​5,​6,​8,​10,​12]
PSFCG20-[25-1000/1]-F[2-68/1]-P[6-17/1]-MSC[8,​10]
PSFCG25-[35-1000/1]-F[2-88/1]-P[8-22/1]-M[4,​5,​6,​8,​10,​12,​16]
PSFCG25-[35-1000/1]-F[2-88/1]-P[8-22/1]-MSC[8,​10,​12,​14]
PSFCG30-[35-1000/1]-F[2-108/1]-P[9-27/1]-M[5,​6,​8,​10,​12,​16,​20]
PSFCG35-[35-1000/1]-F[2-128/1]-P[9-32/1]-M[5,​6,​8,​10,​12,​16,​20,​24]
PSFCG35-[35-1000/1]-F[2-128/1]-P[9-32/1]-MSC[8,​10,​12,​14,​18]
PSFCG40-[50-1000/1]-F[2-148/1]-P[11-37/1]-M[6,​8,​10,​12,​16,​20,​24,​30]
PSFCG40-[50-1000/1]-F[2-148/1]-P[11-37/1]-MSC[8,​10,​12,​14,​18]
PSFCG50-[65-1000/1]-F[2-188/1]-P[11-47/1]-M[6,​8,​10,​12,​16,​20,​24,​30]
PSFCG50-[65-1000/1]-F[2-188/1]-P[11-47/1]-MSC[10,​12,​14,​18]
PSFCJ8-[20-800/1]
PSFCJ10-[20-800/1]
PSFCJ12-[20-1000/1]
PSFCJ15-[25-1000/1]
PSFCJ20-[30-1000/1]
PSFCJ25-[35-1000/1]
PSFCJ30-[35-1000/1]
PSFCJ35-[35-1000/1]
PSFCJ40-[50-1000/1]
PSFCJ50-[65-1000/1]
PSFCN8-[25-800/1]-F[2-30/1]-B[2-28/1]-P[3,​4,​5,​6]
PSFCN8-[25-800/1]-F[2-30/1]-B[2-28/1]-PMC[3,​4,​5,​6]
PSFCN10-[25-800/1]-F[2-40/1]-B[2-38/1]-P[4,​5,​6,​8]
PSFCN10-[25-800/1]-F[2-40/1]-B[2-38/1]-PMC[4,​5,​6,​8]
PSFCN12-[25-1000/1]-F[2-50/1]-B[2-48/1]-P[5,​6,​8,​10]
PSFCN12-[25-1000/1]-F[2-50/1]-B[2-48/1]-PMC[5,​6,​8,​10]
PSFCN12-[25-1000/1]-F[2-50/1]-B[2-48/1]-PMS10
PSFCN15-[25-1000/1]-F[2-60/1]-B[2-58/1]-P[5,​6,​8,​10,​12]
PSFCN15-[25-1000/1]-F[2-60/1]-B[2-58/1]-PMC[5,​6,​8,​10,​12]
PSFCN15-[25-1000/1]-F[2-60/1]-B[2-58/1]-PMS[10,​12,​14]
PSFCN20-[25-1000/1]-F[2-80/1]-B[2-78/1]-P[6,​8,​10,​12,​16]
PSFCN20-[25-1000/1]-F[2-80/1]-B[2-78/1]-PMC[6,​8,​10,​12,​15,​17]
PSFCN20-[25-1000/1]-F[2-80/1]-B[2-78/1]-PMS[10,​12,​14,​18]
PSFCN25-[25-1000/1]-F[2-120/1]-B[2-118/1]-P[8,​10,​12,​16,​20,​24]
PSFCN25-[25-1000/1]-F[2-120/1]-B[2-118/1]-PMC[8,​10,​12,​15,​17,​20]
PSFCN25-[25-1000/1]-F[2-120/1]-B[2-118/1]-PMS[10,​12,​14,​18]
PSFCN30-[25-998/1]-F[2-120/1]-B[2-118/1]-P[8,​10,​12,​16,​20,​24]
PSFCN30-[25-998/1]-F[2-120/1]-B[2-118/1]-PMC[8,​10,​12,​15,​17,​20,​25]
PSFCN30-[25-998/1]-F[2-120/1]-B[2-118/1]-PMS[10,​12,​14,​18]
PSFCN35-[25-1000/1]-F[2-150/1]-B[2-148/1]-P[10,​12,​16,​20,​24,​30]
PSFCN35-[25-1000/1]-F[2-150/1]-B[2-148/1]-PMC[10,​12,​15,​17,​20,​25,​30]
PSFCN35-[25-1000/1]-F[2-150/1]-B[2-148/1]-PMS[10,​12,​14,​18]
PSFCN40-[25-1000/1]-F[2-150/1]-B[2-148/1]-P[12,​16,​20,​24,​30]
PSFCN40-[25-1000/1]-F[2-150/1]-B[2-148/1]-PMC[12,​15,​17,​20,​25,​30]
PSFCN40-[25-1000/1]-F[2-150/1]-B[2-148/1]-PMS[12,​14,​18]
PSFCN50-[25-1000/1]-F[2-150/1]-B[2-148/1]-P[16,​20,​24,​30]
PSFCN50-[25-1000/1]-F[2-150/1]-B[2-148/1]-PMC[15,​17,​20,​25,​30]
PSFCN50-[25-1000/1]-F[2-150/1]-B[2-148/1]-PMS[14,​18]
PSFCQ8-[25-800/1]-B[2-40/1]
PSFCQ10-[25-800/1]-B[2-50/1]
PSFCQ12-[25-1000/1]-B[2-60/1]
PSFCQ20-[25-1000/1]-B[2-100/1]
PSFCQ30-[25-1000/1]-B[2-150/1]
PSFCT8-[20-800/1]-M[3,​4,​5]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSShaft end shape (left) Shaft end shape (right) Shaft Dia. D
(mm)
Length L
(mm)
End Section Type B
(mm)
Change Tapped Thread M to Fine One [MSC]
(mm)
F
(mm)
Fine Thread [PMC]
(mm)
Fine Thread [PMS]
(mm)
Tapped (Coarse) [M]
(mm)
Threaded (Coarse) [P]
(mm)

-

1 9 Days 10TappedStraight825 ~ 800One End Stepped and Tapped Shafts--2 ~ 24--36

-

1 9 Days 10TappedStraight1025 ~ 800One End Stepped and Tapped Shafts--2 ~ 32--3 ~ 56 ~ 8

-

1 9 Days 10TappedStraight1225 ~ 1000One End Stepped and Tapped Shafts--2 ~ 40--3 ~ 66 ~ 10

-

1 9 Days 10TappedStraight1525 ~ 1000One End Stepped and Tapped Shafts--2 ~ 52--3 ~ 106 ~ 13

-

1 9 Days 10TappedStraight1525 ~ 1000One End Stepped and Tapped Shafts-82 ~ 52---6 ~ 13

-

1 9 Days 10TappedStraight2025 ~ 1000One End Stepped and Tapped Shafts--2 ~ 68--4 ~ 126 ~ 17

-

1 9 Days 10TappedStraight2025 ~ 1000One End Stepped and Tapped Shafts-8 ~ 102 ~ 68---6 ~ 17

-

1 9 Days 10TappedStraight2535 ~ 1000One End Stepped and Tapped Shafts--2 ~ 88--4 ~ 168 ~ 22

-

1 9 Days 10TappedStraight2535 ~ 1000One End Stepped and Tapped Shafts-8 ~ 142 ~ 88---8 ~ 22

-

1 9 Days 10TappedStraight3035 ~ 1000One End Stepped and Tapped Shafts--2 ~ 108--5 ~ 209 ~ 27

-

1 9 Days 10TappedStraight3535 ~ 1000One End Stepped and Tapped Shafts--2 ~ 128--5 ~ 249 ~ 32

-

1 9 Days 10TappedStraight3535 ~ 1000One End Stepped and Tapped Shafts-8 ~ 182 ~ 128---9 ~ 32

-

1 9 Days 10TappedStraight4050 ~ 1000One End Stepped and Tapped Shafts--2 ~ 148--6 ~ 3011 ~ 37

-

1 9 Days 10TappedStraight4050 ~ 1000One End Stepped and Tapped Shafts-8 ~ 182 ~ 148---11 ~ 37

-

1 9 Days 10TappedStraight5065 ~ 1000One End Stepped and Tapped Shafts--2 ~ 188--6 ~ 3011 ~ 47

-

1 9 Days 10TappedStraight5065 ~ 1000One End Stepped and Tapped Shafts-10 ~ 182 ~ 188---11 ~ 47

-

1 9 Days 10StraightStraight820 ~ 800Straight-------

-

1 9 Days 10StraightStraight1020 ~ 800Straight-------

-

1 9 Days 10StraightStraight1220 ~ 1000Straight-------

-

1 9 Days 10StraightStraight1525 ~ 1000Straight-------

-

1 9 Days 10StraightStraight2030 ~ 1000Straight-------

-

1 9 Days 10StraightStraight2535 ~ 1000Straight-------

-

1 9 Days 10StraightStraight3035 ~ 1000Straight-------

-

1 9 Days 10StraightStraight3535 ~ 1000Straight-------

-

1 9 Days 10StraightStraight4050 ~ 1000Straight-------

-

1 9 Days 10StraightStraight5065 ~ 1000Straight-------

-

1 9 Days 10ThreadsStraight825 ~ 800One End Threaded2 ~ 28-2 ~ 30---3 ~ 6

-

1 9 Days 10ThreadsStraight825 ~ 800One End Threaded2 ~ 28-2 ~ 303 ~ 6---

-

1 9 Days 10ThreadsStraight1025 ~ 800One End Threaded2 ~ 38-2 ~ 40---4 ~ 8

-

1 9 Days 10ThreadsStraight1025 ~ 800One End Threaded2 ~ 38-2 ~ 404 ~ 8---

-

1 9 Days 10ThreadsStraight1225 ~ 1000One End Threaded2 ~ 48-2 ~ 50---5 ~ 10

-

1 9 Days 10ThreadsStraight1225 ~ 1000One End Threaded2 ~ 48-2 ~ 505 ~ 10---

-

1 9 Days 10ThreadsStraight1225 ~ 1000One End Threaded2 ~ 48-2 ~ 50-10--

-

1 9 Days 10ThreadsStraight1525 ~ 1000One End Threaded2 ~ 58-2 ~ 60---5 ~ 12

-

1 9 Days 10ThreadsStraight1525 ~ 1000One End Threaded2 ~ 58-2 ~ 605 ~ 12---

-

1 9 Days 10ThreadsStraight1525 ~ 1000One End Threaded2 ~ 58-2 ~ 60-10 ~ 14--

-

1 9 Days 10ThreadsStraight2025 ~ 1000One End Threaded2 ~ 78-2 ~ 80---6 ~ 16

-

1 9 Days 10ThreadsStraight2025 ~ 1000One End Threaded2 ~ 78-2 ~ 806 ~ 17---

-

1 9 Days 10ThreadsStraight2025 ~ 1000One End Threaded2 ~ 78-2 ~ 80-10 ~ 18--

-

1 9 Days 10ThreadsStraight2525 ~ 1000One End Threaded2 ~ 118-2 ~ 120---8 ~ 24

-

1 9 Days 10ThreadsStraight2525 ~ 1000One End Threaded2 ~ 118-2 ~ 1208 ~ 20---

-

1 9 Days 10ThreadsStraight2525 ~ 1000One End Threaded2 ~ 118-2 ~ 120-10 ~ 18--

-

1 9 Days 10ThreadsStraight3025 ~ 998One End Threaded2 ~ 118-2 ~ 120---8 ~ 24

-

1 9 Days 10ThreadsStraight3025 ~ 998One End Threaded2 ~ 118-2 ~ 1208 ~ 25---

-

1 9 Days 10ThreadsStraight3025 ~ 998One End Threaded2 ~ 118-2 ~ 120-10 ~ 18--

-

1 9 Days 10ThreadsStraight3525 ~ 1000One End Threaded2 ~ 148-2 ~ 150---10 ~ 30

-

1 9 Days 10ThreadsStraight3525 ~ 1000One End Threaded2 ~ 148-2 ~ 15010 ~ 30---

-

1 9 Days 10ThreadsStraight3525 ~ 1000One End Threaded2 ~ 148-2 ~ 150-10 ~ 18--

-

1 9 Days 10ThreadsStraight4025 ~ 1000One End Threaded2 ~ 148-2 ~ 150---12 ~ 30

-

1 9 Days 10ThreadsStraight4025 ~ 1000One End Threaded2 ~ 148-2 ~ 15012 ~ 30---

-

1 9 Days 10ThreadsStraight4025 ~ 1000One End Threaded2 ~ 148-2 ~ 150-12 ~ 18--

-

1 9 Days 10ThreadsStraight5025 ~ 1000One End Threaded2 ~ 148-2 ~ 150---16 ~ 30

-

1 9 Days 10ThreadsStraight5025 ~ 1000One End Threaded2 ~ 148-2 ~ 15015 ~ 30---

-

1 9 Days 10ThreadsStraight5025 ~ 1000One End Threaded2 ~ 148-2 ~ 150-14 ~ 18--

-

1 9 Days 10ThreadsThreads825 ~ 800One End Threaded Shafts with O.D. same as Shaft O.D.2 ~ 40------

-

1 9 Days 10ThreadsThreads1025 ~ 800One End Threaded Shafts with O.D. same as Shaft O.D.2 ~ 50------

-

1 9 Days 10ThreadsThreads1225 ~ 1000One End Threaded Shafts with O.D. same as Shaft O.D.2 ~ 60------

-

1 9 Days 10ThreadsThreads2025 ~ 1000One End Threaded Shafts with O.D. same as Shaft O.D.2 ~ 100------

-

1 9 Days 10ThreadsThreads3025 ~ 1000One End Threaded Shafts with O.D. same as Shaft O.D.2 ~ 150------

-

1 9 Days 10TappedStraight820 ~ 800One End Tapped-----3 ~ 5-

Loading...

Basic information

Basic Shape Straight Shaft end perpendicularity Perpendicularity (0.2) Material EN 1.3505 Equiv.
Heat Treatment Induction Hardened Surface Treatment Electroless Nickel Plating Shaft Fits Tolerance g6
Hardness Induction Hardening (58HRC~)

Complementary Products

MISUMI Unit еxample related to this product

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360