Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Type | Tolerance | Material | Surface Treatment | |||
Standard | Wrench Flats | D | P, Q | |||
SFRMHM | SFRMHMS | h9 (Cold-drawn) | h7 | EN 1.1191 Equiv. | Black Oxide | |
PSFRMHM | PSFRMHMS | Electroless Nickel Plating | ||||
SSFRMHM | SSFRMHMS | EN 1.4301 Equiv. | - | |||
SFRMGM | SFRMGMS | g6 | EN 1.1191 Equiv. | Black Oxide | ||
PSFRMGM | PSFRMGMS | Electroless Nickel Plating | ||||
SSFRMGM | SSFRMGMS | EN 1.4301 Equiv. | - | |||
SFRHM | SFRHMS | h7 (Ground) | h7 | EN 1.1191 Equiv. | Black Oxide | |
PSFRHM | PSFRHMS | Electroless Nickel Plating | ||||
SSFRHM | SSFRHMS | EN 1.4301 Equiv. | - | |||
SFRM | SFRMS | g6 (Ground) | g6 | EN 1.1191 Equiv. | Black Oxide | |
PSFRM | PSFRMS | Electroless Nickel Plating | ||||
SSFRM | SSFRMS | EN 1.4301 Equiv. | - | |||
HFRM | - | EN 1.7220 Equiv. Hardness: 30 ~ 35HRC | Black Oxide |
Part Number | - | L | - | F | - | B | - | P | - | T | - | S | - | Q | - | SC | |
D part h9 / P, Q part h7 h7 (Ground) with Wrench Flat | SFRMHM30 SFRHMS25 | - - | 250 200 | - - | F30 F25 | - - | B8 B15 | - - | P10 P12 | - - | T30 T25 | - - | S8 S15 | - - | Q10 Q12 | - | SC30 |
Part Number | 0.1mm Increment | 1mm Increment | P, Q Selection | 1mm Increment | W | ℓ2 | (Y) max. | ||||||||||||||
Type | D | L | F, T | B | S | SC Wrench Flats Type only | |||||||||||||||
Standard | Wrench Flats | ||||||||||||||||||||
D part h9 / P, Q part h7 SFRMHM PSFRMHM SSFRMHM (D6 is not available for SSFRMHM.) D part h9 / P, Q part g6 SFRMGM PSFRMGM SSFRMGM (D6 is not available for SSFRMGM.) | D part h9 / P, Q part h7 SFRMHMS PSFRMHMS SSFRMHMS (D6 is not available for SSFRMHMS.) D part h9 / P, Q part g6 SFRMGMS PSFRMGMS SSFRMGMS (D6 is not available for SSFRMGMS.) | 6 | 20.0 ~ 290.0 | 5≤F≤Px7 5≤T≤Qx7 | When P≤6 B≤Px3 & B≤F-2 When P=8 or 10 B≤Px3 & B≤F-3 When P≥12 B≤Px3 & B≤F-5 | When Q≤6 S≤Qx3 & S≤T-2 When Q=8 or 10 S≤Qx3 & S≤T-3 When Q≥12 S≤Qx3 & S≤T-5 | 3 | 4 | 5 | SC+ℓ2≤L SC=0 or SC≥1 | 5 | 8 | 300 | ||||||||
8 | 20.0 ~ 390.0 | 3 | 4 | 5 | 6 | 7 | 400 | ||||||||||||||
10 | 20.0 ~ 490.0 | 4 | 5 | 6 | 8 | 8 | 500 | ||||||||||||||
12 | 25.0 ~ 590.0 | 5 | 6 | 8 | 10 | 10 | 10 | 600 | |||||||||||||
15 | 25.0 ~ 690.0 | 5 | 6 | 8 | 10 | 12 | 13 | 700 | |||||||||||||
20 | 30.0 ~ 790.0 | 6 | 8 | 10 | 12 | 16 | 17 | 800 | |||||||||||||
25 | 30.0 ~ 790.0 | 8 | 10 | 12 | 16 | 20 | 22 | ||||||||||||||
30 | 30.0 ~ 790.0 | 8 | 10 | 12 | 16 | 20 | 24 | 27 | 15 | ||||||||||||
35 | 40.0 ~ 790.0 | 10 | 12 | 16 | 20 | 24 | 30 | 30 |
Part Number | 0.1mm Increment | 1mm Increment | P, Q Selection | 1mm Increment | W | ℓ2 | (Y) max. | ||||||||||||||
Type | D | L | F | B | S | SC Wrench Flats Type only | |||||||||||||||
Standard | Wrench Flats | ||||||||||||||||||||
SFRHM PSFRHM SSFRHM | SFRHMS PSFRHMS SSFRHMS | 6 | 20.0 ~ 290.0 | 5≤F≤Px7 5≤T≤Qx7 | When P≤6 B≤Px3 & B≤F-2 When P=8 or 10 B≤Px3 & B≤F-3 When P≥12 B≤Px3 & B≤F-5 | When Q≤6 S≤Qx3 & S≤T-2 When Q=8 or 10 S≤Qx3 & S≤T-3 When Q≥12 S≤Qx3 & S≤T-5 | 3 | 4 | 5 | SC+ℓ2≤L SC=0 or SC≥1 | 5 | 8 | 300 | ||||||||
8 | 20.0 ~ 390.0 | 3 | 4 | 5 | 6 | 7 | 400 | ||||||||||||||
10 | 20.0 ~ 490.0 | 4 | 5 | 6 | 8 | 8 | 500 | ||||||||||||||
12 | 25.0 ~ 590.0 | 5 | 6 | 8 | 10 | 10 | 10 | 600 | |||||||||||||
15 | 25.0 ~ 690.0 | 5 | 6 | 8 | 10 | 12 | 13 | 700 | |||||||||||||
17 | 30.0 ~ 790.0 | 5 | 6 | 8 | 10 | 12 | 14 | 800 | |||||||||||||
20 | 30.0 ~ 790.0 | 6 | 8 | 10 | 12 | 16 | 17 | ||||||||||||||
25 | 30.0 ~ 790.0 | 8 | 10 | 12 | 16 | 20 | 22 | ||||||||||||||
30 | 30.0 ~ 790.0 | 8 | 10 | 12 | 16 | 20 | 24 | 27 | 15 | ||||||||||||
35 | 40.0 ~ 790.0 | 10 | 12 | 16 | 20 | 24 | 30 | 30 | |||||||||||||
40 | 40.0 ~ 790.0 | 12 | 16 | 20 | 24 | 30 | 36 | 20 | |||||||||||||
50 | 40.0 ~ 790.0 | 16 | 20 | 24 | 30 | 41 |
Part Number | 0.1mm Increment | 1mm Increment | P, Q Selection | 1mm Increment | W | ℓ2 | (Y) max. | |||||||||||||||
Type | D | L | F, T | B | S | SC Wrench Flats Type only | ||||||||||||||||
Standard | Wrench Flats | |||||||||||||||||||||
SFRM PSFRM SSFRM (D13, 16, 18 and 22 are not available for SSFRM.) *HFRM (Only * marked sizes are available.) | SFRMS PSFRMS SSFRMS (D13, 16, 18 and 22 are not available for SSFRMS.) | 6 | 20.0 ~ 290.0 | 5≤F≤Px7 5≤T≤Qx7 | When P≤6 B≤Px3 & B≤F-2 When P=8 or 10 B≤Px3 & B≤F-3 When P≥12 B≤Px3 & B≤F-5 | When Q≤6 S≤Qx3 & S≤T-2 When Q=8 or 10 S≤Qx3 & S≤T-3 When Q≥12 S≤Qx3 & S≤T-5 | 3 | 4 | 5 | SC+ℓ2≤L SC=0 or SC≥1 | 5 | 8 | 300 | |||||||||
8 | 20.0 ~ 390.0 | 3 | 4 | 5 | 6 | 7 | 400 | |||||||||||||||
10 | 20.0 ~ 490.0 | 4 | 5 | 6 | 8 | 8 | 500 | |||||||||||||||
12 | 25.0 ~ 590.0 | 5 | 6 | 8 | 10 | 10 | 10 | 600 | ||||||||||||||
13 | 25.0 ~ 590.0 | 5 | 6 | 8 | 10 | 11 | ||||||||||||||||
* | 15 | 25.0 ~ 690.0 | 5 | 6 | 8 | 10 | 12 | 13 | 700 | |||||||||||||
16 | 25.0 ~ 690.0 | 5 | 6 | 8 | 10 | 12 | 14 | 800 | ||||||||||||||
17 | 30.0 ~ 790.0 | 5 | 6 | 8 | 10 | 12 | ||||||||||||||||
18 | 30.0 ~ 790.0 | 5 | 6 | 8 | 10 | 12 | 15 | |||||||||||||||
* | 20 | 30.0 ~ 790.0 | 6 | 8 | 10 | 12 | 16 | 17 | ||||||||||||||
22 | 30.0 ~ 790.0 | 6 | 8 | 10 | 12 | 16 | 19 | |||||||||||||||
* | 25 | 30.0 ~ 790.0 | 8 | 10 | 12 | 16 | 20 | 22 | ||||||||||||||
* | 30 | 30.0 ~ 790.0 | 8 | 10 | 12 | 16 | 20 | 24 | 27 | 15 | ||||||||||||
* | 35 | 40.0 ~ 790.0 | 10 | 12 | 16 | 20 | 24 | 30 | 30 | |||||||||||||
* | 40 | 40.0 ~ 790.0 | 12 | 16 | 20 | 24 | 30 | 36 | 20 | |||||||||||||
* | 50 | 40.0 ~ 790.0 | 16 | 20 | 24 | 30 | 41 |
3D preview is not available, because the part number has not yet been determined.
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Material | Hardness | Surface Treatment | D Tolerance | Shaft Dia. D (mm) | Length L (mm) | Change to Left-hand Threaded [PLM] | B (mm) | Change to Fine Threads [PMC] (mm) | Change to Fine Threads [QMC] (mm) | F (mm) | P (mm) | Q (mm) | S (mm) | T (mm) | Wrench Flats Machining [SC] (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 17 | 30 ~ 890 | - | 2 ~ 36 | 6 ~ 15 | - | 2 ~ 84 | - | 5 ~ 12 | 2 ~ 36 | 2 ~ 84 | 0 ~ 880 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 17 | 30 ~ 890 | - | 2 ~ 36 | 6 ~ 15 | 6 ~ 15 | 2 ~ 84 | - | - | 2 ~ 36 | 2 ~ 84 | 0 ~ 880 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 20 | 30 ~ 990 | - | 2 ~ 60 | - | - | 2 ~ 112 | 6 ~ 16 | 6 ~ 16 | 2 ~ 60 | 2 ~ 112 | 0 ~ 980 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 20 | 30 ~ 990 | - | 2 ~ 60 | - | 6 ~ 17 | 2 ~ 112 | 6 ~ 16 | - | 2 ~ 60 | 2 ~ 112 | 0 ~ 980 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 20 | 30 ~ 990 | - | 2 ~ 60 | 6 ~ 17 | - | 2 ~ 112 | - | 6 ~ 16 | 2 ~ 60 | 2 ~ 112 | 0 ~ 980 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 20 | 30 ~ 990 | - | 2 ~ 60 | 6 ~ 17 | 6 ~ 17 | 2 ~ 112 | - | - | 2 ~ 60 | 2 ~ 112 | 0 ~ 980 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 25 | 30 ~ 990 | - | 2 ~ 60 | - | - | 3 ~ 150 | 8 ~ 20 | 8 ~ 20 | 2 ~ 60 | 3 ~ 140 | 0 ~ 980 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 25 | 30 ~ 990 | - | 2 ~ 60 | - | 8 ~ 20 | 3 ~ 150 | 8 ~ 20 | - | 2 ~ 60 | 3 ~ 140 | 0 ~ 980 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 25 | 30 ~ 990 | - | 2 ~ 60 | 8 ~ 20 | - | 3 ~ 150 | - | 8 ~ 20 | 2 ~ 60 | 3 ~ 140 | 0 ~ 980 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 25 | 30 ~ 990 | - | 2 ~ 60 | 8 ~ 20 | 8 ~ 20 | 3 ~ 150 | - | - | 2 ~ 60 | 3 ~ 140 | 0 ~ 980 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 30 | 30 ~ 990 | - | 2 ~ 72 | - | - | 3 ~ 168 | 8 ~ 24 | 8 ~ 24 | 2 ~ 72 | 3 ~ 168 | 0 ~ 975 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 30 | 30 ~ 990 | - | 2 ~ 72 | - | 8 ~ 25 | 3 ~ 168 | 8 ~ 24 | - | 2 ~ 72 | 3 ~ 168 | 0 ~ 975 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 30 | 30 ~ 990 | - | 2 ~ 72 | 8 ~ 25 | - | 3 ~ 168 | - | 8 ~ 24 | 2 ~ 72 | 3 ~ 168 | 0 ~ 975 | ||
- | 1 | 4 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 30 | 30 ~ 990 | - | 2 ~ 72 | 8 ~ 25 | 8 ~ 25 | 3 ~ 168 | - | - | 2 ~ 72 | 3 ~ 168 | 0 ~ 975 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 35 | 40 ~ 990 | - | 2 ~ 90 | - | - | 3 ~ 210 | 10 ~ 30 | 10 ~ 30 | 2 ~ 90 | 3 ~ 210 | 0 ~ 975 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 35 | 40 ~ 990 | - | 2 ~ 90 | - | 10 ~ 30 | 3 ~ 210 | 10 ~ 30 | - | 2 ~ 90 | 3 ~ 210 | 0 ~ 975 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 35 | 40 ~ 990 | - | 2 ~ 90 | 10 ~ 30 | - | 3 ~ 210 | - | 10 ~ 30 | 2 ~ 90 | 3 ~ 210 | 0 ~ 975 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 35 | 40 ~ 990 | - | 2 ~ 90 | 10 ~ 30 | 10 ~ 30 | 3 ~ 210 | - | - | 2 ~ 90 | 3 ~ 210 | 0 ~ 975 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 40 | 40 ~ 990 | - | 2 ~ 90 | - | - | 5 ~ 210 | 12 ~ 30 | 12 ~ 30 | 2 ~ 90 | 5 ~ 210 | 0 ~ 970 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 40 | 40 ~ 990 | - | 2 ~ 90 | - | 12 ~ 30 | 5 ~ 210 | 12 ~ 30 | - | 2 ~ 90 | 5 ~ 210 | 0 ~ 970 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 40 | 40 ~ 990 | - | 2 ~ 90 | 12 ~ 30 | - | 5 ~ 210 | - | 12 ~ 30 | 2 ~ 90 | 5 ~ 210 | 0 ~ 970 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 40 | 40 ~ 990 | - | 2 ~ 90 | 12 ~ 30 | 12 ~ 30 | 5 ~ 210 | - | - | 2 ~ 90 | 5 ~ 210 | 0 ~ 970 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 50 | 40 ~ 990 | - | 2 ~ 90 | - | - | 5 ~ 210 | 16 ~ 30 | 16 ~ 30 | 2 ~ 90 | 5 ~ 210 | 0 ~ 970 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 50 | 40 ~ 990 | - | 2 ~ 90 | - | 15 ~ 35 | 5 ~ 210 | 16 ~ 30 | - | 2 ~ 90 | 5 ~ 210 | 0 ~ 970 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 50 | 40 ~ 990 | - | 2 ~ 90 | 15 ~ 35 | - | 5 ~ 210 | - | 16 ~ 30 | 2 ~ 90 | 5 ~ 210 | 0 ~ 970 | ||
- | 1 | 6 Days | 10 | [Stainless Steel] EN 1.4301 Equiv. | No Hardened | NA | g6 (Ground) | 50 | 40 ~ 990 | - | 2 ~ 90 | 15 ~ 35 | 15 ~ 35 | 5 ~ 210 | - | - | 2 ~ 90 | 5 ~ 210 | 0 ~ 970 |
Loading...
Basic Shape | Both Ends Stepped | End Shape (Left) | Threads | End Shape (Right) | Threads |
---|---|---|---|---|---|
Keyway | Keyway Option (Alteration) |
Configure
Basic Attributes
Material
Hardness
Surface Treatment
Shaft Dia. D(mm)
Length L(mm)
Change to Left-hand Threaded [PLM]
B(mm)
Change to Fine Threads [PMC](mm)
Change to Fine Threads [QMC](mm)
F(mm)
P(mm)
Q(mm)
S(mm)
T(mm)
Wrench Flats Machining [SC](mm)
Type
D Tolerance
Filter by CAD data type
Filter by standard shipping days
Optional Attributes