Hinge pins / stainless steel, steel / free choice of end shape (Part Numbers - CAD Download)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Type | Material | Surface Treatment | Hardness |
| FCL□□ | EN 1.1191 Equiv. | Black Oxide | - |
| FCLH□□ | 40~45HRC | ||
| PFCL□□ | Electroless Nickel Plating | - | |
| PFCLH□□ | 40~45HRC | ||
| GFCL□□ | Hard Chrome Plating | Plating Hardness 750HV~ | |
| FCLS□□ | EN 1.4301 Equiv. | - | - |
| FCLSH□□ | EN 1.4125 Equiv. | 45~50HRC | |
| GFCLSH□□ | Hard Chrome Plating | 45~50HRC Plating Hardness 750HV~ |
Specifications
| Part Number | D | - | L | - | T | - | N | - | G | - | K | - | Y | - | H | - | M | - | TC | - | NC | - | GC | - | KC | - | YC | - | HC | - | MC | |||||
| - | ||||||||||||||||||||||||||||||||||||
| Type | Left End | Right End | ||||||||||||||||||||||||||||||||||
| FCL | D | G | - | D10 | - | L100 | - | T2 | - | H14 | - | NC10 | - | KC6.5 | - | YC1.5 | ||||||||||||||||||||
| Part Number | 1mm Increment | 0.1mm Increment | 0.5mm Increment | Selection | C | |||||||
| Type | Left End Shape | Right End Shape | D | L | T (TC) | N (NC) | G (GC) | K (KC) | Y (YC) | H (HC) | M (MC) (Coarse) | |
| FCL FCLH PFCL PFCLH GFCL FCLS FCLSH GFCLSH | A B C D E F G H | A B C D E F G H | 3~20 4≤D (Shaft End Shape E) 6≤D (Shaft End Shape B, F, H) | 5~200 (L≤Dx20) | 0.5≤T(TC)≤L/4 | 2≤N(NC)≤L/4 (Shaft End Shape C) G(GC) • M(MC)/2+1 ≤N(NC)≤L/4 (Shaft End Shape B) N(NC)=0 or 2≤N(NC)≤L/4 (Shaft End Shape G) 2≤N(NC)≤L/4 (Shaft End Shape H) | D/5≤G(GC)≤D/2 | 2≤K(KC)≤30 | Y(YC)≤D/2 | D+1≤H(HC)≤D+10 | 3 4 5 6 8 10 12 16 (M(MC)≤D/2) (Shaft End Shape B) (M(MC)(Shaft End Shape E) (M(MC)≤D-3) (Shaft End Shape F) | 0.5 or Less |
Alterations
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Part Number
|
|---|
| FCLHE-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLHEA-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16] |
| FCLHEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-GC[0-10/0.1] |
| FCLHEB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| FCLHEC-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1] |
| FCLHED-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[5-30/0.5] |
| FCLHEE-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16] |
| FCLHEF-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16] |
| FCLHEG-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0.1-10/0.1] |
| FCLHEH-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-125/0.1] |
| FCLHF-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLHFA-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16] |
| FCLHFB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-GC[0-10/0.1] |
| FCLHFB-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| FCLHFC-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1] |
| FCLHFD-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| FCLHFE-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16] |
| FCLHFF-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-MC[3,4,5,6,8,10,12,16] |
| FCLHFG-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0.1-10/0.1] |
| FCLHFH-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-125/0.1] |
| FCLHG-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0.1-10/0.1] |
| FCLHGA-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0.1-10/0.1] |
| FCLHGB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0.1-10/0.1]-NC[0-125/0.1]-GC[0-10/0.1] |
| FCLHGB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0.1-10/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| FCLHGC-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0.1-10/0.1]-NC[2-50/0.1] |
| FCLHGD-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0.1-10/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5] |
| FCLHGE-D[4-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0.1-10/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLHGF-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0.1-10/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLHGG-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0.1-10/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0.1-10/0.1] |
| FCLHGH-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0.1-10/0.1]-NC[2-125/0.1] |
| FCLHH-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[2-125/0.1] |
| FCLHHA-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1] |
| FCLHHB-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[0-125/0.1]-GC[0-10/0.1] |
| FCLHHB-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| FCLHHC-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[2-50/0.1] |
| FCLHHD-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| FCLHHE-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLHHF-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLHHG-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0.1-10/0.1] |
| FCLHHH-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[2-125/0.1] |
| FCLSAA-D[3-20/1]-L[5-200/0.1] |
| FCLSAB-D[6-20/1]-L[5-200/0.1]-NC[0-125/0.1]-GC[0-10/0.1] |
| FCLSAB-D[6-20/1]-L[5-200/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| FCLSAC-D[3-20/1]-L[5-200/0.1]-NC[2-50/0.1] |
| FCLSAD-D[3-20/1]-L[5-200/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5] |
| FCLSAE-D[4-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLSAF-D[6-20/1]-L[5-200/0.1]-MC[3,4,5,6,8,10,12,16] |
| FCLSAG-D[3-20/1]-L[5-200/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0.1-10/0.1] |
| FCLSAH-D[6-20/1]-L[5-200/0.1]-NC[2-125/0.1] |
| FCLSBA-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1] |
| FCLSBA-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10] |
| FCLSBB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[0-125/0.1]-GC[0-10/0.1] |
| FCLSBB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| FCLSBB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[0-125/0.1]-GC[0-10/0.1] |
| FCLSBB-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| FCLSBC-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[2-50/0.1] |
| FCLSBC-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[2-50/0.1] |
| FCLSBD-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| FCLSBD-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| FCLSBE-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-MC[3,4,5,6,8,10,12,16] |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Basic Shape | Mounting Method | Shaft Dia. D (mm) | Material | Hardness | Surface Treatment | Material Detail | Left End Shape | Right End Shape | G (mm) | GC (mm) | H (mm) | HC (mm) | K (mm) | KC (mm) | L (mm) | M (mm) | MC (mm) | N (mm) | NC (mm) | T (mm) | TC (mm) | Y (mm) | YC (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 4 Days | 10 | Straight | Nut (Threaded) / Set Screw (V Groove) | 6 ～ 20 | Steel | Not Specified | Black Oxide | EN 1.1191 Equiv. | H | E | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 2 ～ 125 | - | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Nut (Threaded) | 4 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | E | A | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | - | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Split Pin / Nut (Threaded) | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | E | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 0 ～ 125 | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Split Pin / Nut (Threaded) | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | E | B | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 10 | - | 0 ～ 125 | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Retaining Ring / Nut (Threaded) | 4 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | E | C | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 2 ～ 50 | - | - | - | - | ||
- | 1 | 4 Days | 10 | Shouldered | Nut (Threaded) | 4 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | E | D | - | - | - | 5 ～ 30 | - | - | 5 ～ 200 | 3 ～ 16 | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 | 4 Days | 10 | Straight | Nut (Threaded) | 4 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | E | E | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Nut (Threaded) / Tapped | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | E | F | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway | 4 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | E | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | 3 ～ 16 | - | - | 0 ～ 125 | - | - | - | 0.1 ～ 10 | ||
- | 1 | 4 Days | 10 | Straight | Nut (Threaded) / Set Screw (V Groove) | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | E | H | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 2 ～ 125 | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Tapped / Set Screw (V Groove) | 6 ～ 20 | Steel | Not Specified | Black Oxide | EN 1.1191 Equiv. | H | F | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 2 ～ 125 | - | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Tapped | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | F | A | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | - | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Split Pin / Tapped | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | F | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 0 ～ 125 | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Split Pin / Tapped | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | F | B | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 10 | - | 0 ～ 125 | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Retaining Ring / Tapped | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | F | C | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 2 ～ 50 | - | - | - | - | ||
- | 1 | 4 Days | 10 | Shouldered | Tapped | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | F | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 200 | 3 ～ 16 | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 | 4 Days | 10 | Straight | Nut (Threaded) / Tapped | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | F | E | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Tapped | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | F | F | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Tapped / Set Screw (Set Screw Flat, D-Cut) / Keyway | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | F | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | 3 ～ 16 | - | - | 0 ～ 125 | - | - | - | 0.1 ～ 10 | ||
- | 1 | 4 Days | 10 | Straight | Tapped / Set Screw (V Groove) | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | F | H | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 16 | - | - | 2 ～ 125 | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Set Screw (Set Screw Flat, D-Cut) / Keyway / Set Screw (V Groove) | 6 ～ 20 | Steel | Not Specified | Black Oxide | EN 1.1191 Equiv. | H | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | - | - | 2 ～ 125 | 0 ～ 125 | - | - | - | 0.1 ～ 10 | ||
- | 1 | 4 Days | 10 | Straight | Set Screw (Set Screw Flat, D-Cut) / Keyway | 3 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | G | A | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | - | 0 ～ 125 | - | - | - | 0.1 ～ 10 | - | ||
- | 1 | 4 Days | 10 | Straight | Split Pin / Set Screw (Set Screw Flat, D-Cut) / Keyway | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | G | B | - | 0 ～ 10 | - | - | 2 ～ 30 | - | 5 ～ 200 | - | - | 0 ～ 125 | 0 ～ 125 | - | - | 0.1 ～ 10 | - | ||
- | 1 | 4 Days | 10 | Straight | Split Pin / Set Screw (Set Screw Flat, D-Cut) / Keyway | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | G | B | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | 3 ～ 10 | 0 ～ 125 | 0 ～ 125 | - | - | 0.1 ～ 10 | - | ||
- | 1 | 4 Days | 10 | Straight | Retaining Ring / Set Screw (Set Screw Flat, D-Cut) / Keyway | 3 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | G | C | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | - | 0 ～ 125 | 2 ～ 50 | - | - | 0.1 ～ 10 | - | ||
- | 1 | 4 Days | 10 | Shouldered | Set Screw (Set Screw Flat, D-Cut) / Keyway | 3 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | G | D | - | - | - | 4 ～ 30 | 2 ～ 30 | - | 5 ～ 200 | - | - | 0 ～ 125 | - | - | 0.5 ～ 125 | 0.1 ～ 10 | - | ||
- | 1 | 4 Days | 10 | Straight | Nut (Threaded) / Set Screw (Set Screw Flat, D-Cut) / Keyway | 4 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | G | E | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | 3 ～ 16 | 0 ～ 125 | - | - | - | 0.1 ～ 10 | - | ||
- | 1 | 4 Days | 10 | Straight | Tapped / Set Screw (Set Screw Flat, D-Cut) / Keyway | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | G | F | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | 3 ～ 16 | 0 ～ 125 | - | - | - | 0.1 ～ 10 | - | ||
- | 1 | 4 Days | 10 | Straight | Set Screw (Set Screw Flat, D-Cut) / Keyway | 3 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | G | G | - | - | - | - | 2 ～ 30 | 2 ～ 30 | 5 ～ 200 | - | - | 0 ～ 125 | 0 ～ 125 | - | - | 0.1 ～ 10 | 0.1 ～ 10 | ||
- | 1 | 4 Days | 10 | Straight | Set Screw (Set Screw Flat, D-Cut) / Keyway / Set Screw (V Groove) | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | G | H | - | - | - | - | 2 ～ 30 | - | 5 ～ 200 | - | - | 0 ～ 125 | 2 ～ 125 | - | - | 0.1 ～ 10 | - | ||
- | 1 | 4 Days | 10 | Straight | Set Screw (V Groove) | 6 ～ 20 | Steel | Not Specified | Black Oxide | EN 1.1191 Equiv. | H | H | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 125 | 2 ～ 125 | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Set Screw (V Groove) | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | H | A | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 125 | - | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Split Pin / Set Screw (V Groove) | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | H | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Split Pin / Set Screw (V Groove) | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | H | B | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 10 | 2 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Retaining Ring / Set Screw (V Groove) | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | H | C | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 125 | 2 ～ 50 | - | - | - | - | ||
- | 1 | 4 Days | 10 | Shouldered | Set Screw (V Groove) | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | H | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 200 | - | - | 2 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 | 4 Days | 10 | Straight | Nut (Threaded) / Set Screw (V Groove) | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | H | E | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 2 ～ 125 | - | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Tapped / Set Screw (V Groove) | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | H | F | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 2 ～ 125 | - | - | - | - | - | ||
- | 1 | 4 Days | 10 | Straight | Set Screw (Set Screw Flat, D-Cut) / Keyway / Set Screw (V Groove) | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | H | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | - | - | 2 ～ 125 | 0 ～ 125 | - | - | - | 0.1 ～ 10 | ||
- | 1 | 4 Days | 10 | Straight | Set Screw (V Groove) | 6 ～ 20 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | H | H | - | - | - | - | - | - | 5 ～ 200 | - | - | 2 ～ 125 | 2 ～ 125 | - | - | - | - | ||
- | 1 | 3 Days | 10 | Shouldered | Straight | 3 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | A | A | - | - | - | - | - | - | 5 ～ 200 | - | - | - | - | - | - | - | - | ||
- | 1 | 3 Days | 10 | Straight | Split Pin | 6 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | A | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | - | - | - | 0 ～ 125 | - | - | - | - | ||
- | 1 | 3 Days | 10 | Straight | Split Pin | 6 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | A | B | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 10 | - | 0 ～ 125 | - | - | - | - | ||
- | 1 | 3 Days | 10 | Straight | Retaining Ring | 3 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | A | C | - | - | - | - | - | - | 5 ～ 200 | - | - | - | 2 ～ 50 | - | - | - | - | ||
- | 1 | 3 Days | 10 | Shouldered | Straight | 3 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | A | D | - | - | - | 4 ～ 30 | - | - | 5 ～ 200 | - | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 | 3 Days | 10 | Straight | Nut (Threaded) | 4 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | A | E | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 | 3 Days | 10 | Straight | Tapped | 6 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | A | F | - | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | - | - | - | - | - | - | ||
- | 1 | 3 Days | 10 | Straight | Set Screw (Set Screw Flat, D-Cut) / Keyway | 3 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | A | G | - | - | - | - | - | 2 ～ 30 | 5 ～ 200 | - | - | - | 0 ～ 125 | - | - | - | 0.1 ～ 10 | ||
- | 1 | 3 Days | 10 | Straight | Set Screw (V Groove) | 6 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | A | H | - | - | - | - | - | - | 5 ～ 200 | - | - | - | 2 ～ 125 | - | - | - | - | ||
- | 1 | 3 Days | 10 | Straight | Split Pin | 6 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | B | A | 0 ～ 10 | - | - | - | - | - | 5 ～ 200 | - | - | 0 ～ 125 | - | - | - | - | - | ||
- | 1 | 3 Days | 10 | Straight | Split Pin | 6 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | B | A | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | - | - | - | - | - | ||
- | 1 | 3 Days | 10 | Straight | Split Pin | 6 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | B | B | 0 ～ 10 | 0 ～ 10 | - | - | - | - | 5 ～ 200 | - | - | 0 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 | 3 Days | 10 | Straight | Split Pin | 6 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | B | B | 0 ～ 10 | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 10 | 0 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 | 3 Days | 10 | Straight | Split Pin | 6 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | B | B | - | 0 ～ 10 | - | - | - | - | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 | 3 Days | 10 | Straight | Split Pin | 6 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | B | B | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 10 | 3 ～ 10 | 0 ～ 125 | 0 ～ 125 | - | - | - | - | ||
- | 1 | 3 Days | 10 | Straight | Retaining Ring / Split Pin | 6 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | B | C | 0 ～ 10 | - | - | - | - | - | 5 ～ 200 | - | - | 0 ～ 125 | 2 ～ 50 | - | - | - | - | ||
- | 1 | 3 Days | 10 | Straight | Retaining Ring / Split Pin | 6 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | B | C | - | - | - | - | - | - | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | 2 ～ 50 | - | - | - | - | ||
- | 1 | 3 Days | 10 | Shouldered | Split Pin | 6 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | B | D | 0 ～ 10 | - | - | 7 ～ 30 | - | - | 5 ～ 200 | - | - | 0 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 | 3 Days | 10 | Shouldered | Split Pin | 6 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | B | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 200 | 3 ～ 10 | - | 0 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 | 3 Days | 10 | Straight | Split Pin / Nut (Threaded) | 6 ～ 20 | Stainless Steel | Not Specified | Not Provided | EN 1.4301 Equiv. | B | E | 0 ～ 10 | - | - | - | - | - | 5 ～ 200 | - | 3 ～ 16 | 0 ～ 125 | - | - | - | - | - |
Loading...
Basic information
| Type | L Dimension Configurable |
|---|
Configure
Basic Attributes
-
Basic Shape
-
Shouldered -
Straight
-
-
Mounting Method
-
Straight -
Retaining Ring -
Split Pin -
Nut (Threaded) -
Tapped -
Set Screw (Set Screw Flat, D-Cut) -
Keyway -
Set Screw (V Groove)
-
-
Shaft Dia. D(mm)
-
Material
- Steel
- Stainless Steel
-
Hardness
- Not Specified
- Hardness Spec-designed
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Hard Chrome Plating
-
Material Detail
- EN 1.1191 Equiv.
- EN 1.4125 Equiv.
- EN 1.4301 Equiv.
-
Left End Shape
- A
- B
- C
- D
- E
- F
- G
- H
-
Right End Shape
- A
- B
- C
- D
- E
- F
- G
- H
-
G(mm)
-
GC(mm)
-
H(mm)
-
HC(mm)
-
K(mm)
-
KC(mm)
-
L(mm)
-
M(mm)
-
MC(mm)
-
N(mm)
-
NC(mm)
-
T(mm)
-
TC(mm)
-
Y(mm)
-
YC(mm)
-
Type
- FCLAA
- FCLAB
- FCLAC
- FCLAD
- FCLAE
- FCLAF
- FCLAG
- FCLAH
- FCLBA
- FCLBB
- FCLBC
- FCLBD
- FCLBE
- FCLBF
- FCLBG
- FCLBH
- FCLCA
- FCLCB
- FCLCC
- FCLCD
- FCLCE
- FCLCF
- FCLCG
- FCLCH
- FCLDA
- FCLDB
- FCLDC
- FCLDE
- FCLDF
- FCLDG
- FCLDH
- FCLEA
- FCLEB
- FCLEC
- FCLED
- FCLEE
- FCLEF
- FCLEG
- FCLEH
- FCLFA
- FCLFB
- FCLFC
- FCLFD
- FCLFE
- FCLFF
- FCLFG
- FCLFH
- FCLGA
- FCLGB
- FCLGC
- FCLGD
- FCLGE
- FCLGF
- FCLGG
- FCLGH
- FCLHA
- FCLHAA
- FCLHAB
- FCLHAC
- FCLHAD
- FCLHAE
- FCLHAF
- FCLHAG
- FCLHAH
- FCLHB
- FCLHBA
- FCLHBB
- FCLHBC
- FCLHBD
- FCLHBE
- FCLHBF
- FCLHBG
- FCLHBH
- FCLHC
- FCLHCA
- FCLHCB
- FCLHCC
- FCLHCD
- FCLHCE
- FCLHCF
- FCLHCG
- FCLHCH
- FCLHD
- FCLHDA
- FCLHDB
- FCLHDC
- FCLHDE
- FCLHDF
- FCLHDG
- FCLHDH
- FCLHE
- FCLHEA
- FCLHEB
- FCLHEC
- FCLHED
- FCLHEE
- FCLHEF
- FCLHEG
- FCLHEH
- FCLHF
- FCLHFA
- FCLHFB
- FCLHFC
- FCLHFD
- FCLHFE
- FCLHFF
- FCLHFG
- FCLHFH
- FCLHG
- FCLHGA
- FCLHGB
- FCLHGC
- FCLHGD
- FCLHGE
- FCLHGF
- FCLHGG
- FCLHGH
- FCLHH
- FCLHHA
- FCLHHB
- FCLHHC
- FCLHHD
- FCLHHE
- FCLHHF
- FCLHHG
- FCLHHH
- FCLSAA
- FCLSAB
- FCLSAC
- FCLSAD
- FCLSAE
- FCLSAF
- FCLSAG
- FCLSAH
- FCLSBA
- FCLSBB
- FCLSBC
- FCLSBD
- FCLSBE
- FCLSBF
- FCLSBG
- FCLSBH
- FCLSCA
- FCLSCB
- FCLSCC
- FCLSCD
- FCLSCE
- FCLSCF
- FCLSCG
- FCLSCH
- FCLSDA
- FCLSDB
- FCLSDC
- FCLSDE
- FCLSDF
- FCLSDG
- FCLSDH
- FCLSEA
- FCLSEB
- FCLSEC
- FCLSED
- FCLSEE
- FCLSEF
- FCLSEG
- FCLSEH
- FCLSFA
- FCLSFB
- FCLSFC
- FCLSFD
- FCLSFE
- FCLSFF
- FCLSFG
- FCLSFH
- FCLSGA
- FCLSGB
- FCLSGC
- FCLSGD
- FCLSGE
- FCLSGF
- FCLSGG
- FCLSGH
- FCLSHA
- FCLSHAA
- FCLSHAB
- FCLSHAC
- FCLSHAD
- FCLSHAE
- FCLSHAF
- FCLSHAG
- FCLSHAH
- FCLSHB
- FCLSHBA
- FCLSHBB
- FCLSHBC
- FCLSHBD
- FCLSHBE
- FCLSHBF
- FCLSHBG
- FCLSHBH
- FCLSHC
- FCLSHCA
- FCLSHCB
- FCLSHCC
- FCLSHCD
- FCLSHCE
- FCLSHCF
- FCLSHCG
- FCLSHCH
- FCLSHD
- FCLSHDA
- FCLSHDB
- FCLSHDC
- FCLSHDE
- FCLSHDF
- FCLSHDG
- FCLSHDH
- FCLSHE
- FCLSHEA
- FCLSHEB
- FCLSHEC
- FCLSHED
- FCLSHEE
- FCLSHEF
- FCLSHEG
- FCLSHEH
- FCLSHF
- FCLSHFA
- FCLSHFB
- FCLSHFC
- FCLSHFD
- FCLSHFE
- FCLSHFF
- FCLSHFG
- FCLSHFH
- FCLSHG
- FCLSHGA
- FCLSHGB
- FCLSHGC
- FCLSHGD
- FCLSHGE
- FCLSHGF
- FCLSHGG
- FCLSHGH
- FCLSHH
- FCLSHHA
- FCLSHHB
- FCLSHHC
- FCLSHHD
- FCLSHHE
- FCLSHHF
- FCLSHHG
- FCLSHHH
- GFCLAA
- GFCLAB
- GFCLAC
- GFCLAD
- GFCLAE
- GFCLAF
- GFCLAG
- GFCLAH
- GFCLBA
- GFCLBB
- GFCLBC
- GFCLBD
- GFCLBE
- GFCLBF
- GFCLBG
- GFCLBH
- GFCLCA
- GFCLCB
- GFCLCC
- GFCLCD
- GFCLCE
- GFCLCF
- GFCLCG
- GFCLCH
- GFCLDA
- GFCLDB
- GFCLDC
- GFCLDE
- GFCLDF
- GFCLDG
- GFCLDH
- GFCLEA
- GFCLEB
- GFCLEC
- GFCLED
- GFCLEE
- GFCLEF
- GFCLEG
- GFCLEH
- GFCLFA
- GFCLFB
- GFCLFC
- GFCLFD
- GFCLFE
- GFCLFF
- GFCLFG
- GFCLFH
- GFCLGA
- GFCLGB
- GFCLGC
- GFCLGD
- GFCLGE
- GFCLGF
- GFCLGG
- GFCLGH
- GFCLHA
- GFCLHB
- GFCLHC
- GFCLHD
- GFCLHE
- GFCLHF
- GFCLHG
- GFCLHH
- GFCLSHAA
- GFCLSHAB
- GFCLSHAC
- GFCLSHAD
- GFCLSHAE
- GFCLSHAF
- GFCLSHAG
- GFCLSHAH
- GFCLSHBA
- GFCLSHBB
- GFCLSHBC
- GFCLSHBD
- GFCLSHBE
- GFCLSHBF
- GFCLSHBG
- GFCLSHBH
- GFCLSHCA
- GFCLSHCB
- GFCLSHCC
- GFCLSHCD
- GFCLSHCE
- GFCLSHCF
- GFCLSHCG
- GFCLSHCH
- GFCLSHDA
- GFCLSHDB
- GFCLSHDC
- GFCLSHDE
- GFCLSHDF
- GFCLSHDG
- GFCLSHDH
- GFCLSHEA
- GFCLSHEB
- GFCLSHEC
- GFCLSHED
- GFCLSHEE
- GFCLSHEF
- GFCLSHEG
- GFCLSHEH
- GFCLSHFA
- GFCLSHFB
- GFCLSHFC
- GFCLSHFD
- GFCLSHFE
- GFCLSHFF
- GFCLSHFG
- GFCLSHFH
- GFCLSHGA
- GFCLSHGB
- GFCLSHGC
- GFCLSHGD
- GFCLSHGE
- GFCLSHGF
- GFCLSHGG
- GFCLSHGH
- GFCLSHHA
- GFCLSHHB
- GFCLSHHC
- GFCLSHHD
- GFCLSHHE
- GFCLSHHF
- GFCLSHHG
- GFCLSHHH
- PFCLAA
- PFCLAB
- PFCLAC
- PFCLAD
- PFCLAE
- PFCLAF
- PFCLAG
- PFCLAH
- PFCLBA
- PFCLBB
- PFCLBC
- PFCLBD
- PFCLBE
- PFCLBF
- PFCLBG
- PFCLBH
- PFCLCA
- PFCLCB
- PFCLCC
- PFCLCD
- PFCLCE
- PFCLCF
- PFCLCG
- PFCLCH
- PFCLDA
- PFCLDB
- PFCLDC
- PFCLDE
- PFCLDF
- PFCLDG
- PFCLDH
- PFCLEA
- PFCLEB
- PFCLEC
- PFCLED
- PFCLEE
- PFCLEF
- PFCLEG
- PFCLEH
- PFCLFA
- PFCLFB
- PFCLFC
- PFCLFD
- PFCLFE
- PFCLFF
- PFCLFG
- PFCLFH
- PFCLGA
- PFCLGB
- PFCLGC
- PFCLGD
- PFCLGE
- PFCLGF
- PFCLGG
- PFCLGH
- PFCLHA
- PFCLHAA
- PFCLHAB
- PFCLHAC
- PFCLHAD
- PFCLHAE
- PFCLHAF
- PFCLHAG
- PFCLHAH
- PFCLHB
- PFCLHBA
- PFCLHBB
- PFCLHBC
- PFCLHBD
- PFCLHBE
- PFCLHBF
- PFCLHBG
- PFCLHBH
- PFCLHC
- PFCLHCA
- PFCLHCB
- PFCLHCC
- PFCLHCD
- PFCLHCE
- PFCLHCF
- PFCLHCG
- PFCLHCH
- PFCLHD
- PFCLHDA
- PFCLHDB
- PFCLHDC
- PFCLHDE
- PFCLHDF
- PFCLHDG
- PFCLHDH
- PFCLHE
- PFCLHEA
- PFCLHEB
- PFCLHEC
- PFCLHED
- PFCLHEE
- PFCLHEF
- PFCLHEG
- PFCLHEH
- PFCLHF
- PFCLHFA
- PFCLHFB
- PFCLHFC
- PFCLHFD
- PFCLHFE
- PFCLHFF
- PFCLHFG
- PFCLHFH
- PFCLHG
- PFCLHGA
- PFCLHGB
- PFCLHGC
- PFCLHGD
- PFCLHGE
- PFCLHGF
- PFCLHGG
- PFCLHGH
- PFCLHH
- PFCLHHA
- PFCLHHB
- PFCLHHC
- PFCLHHD
- PFCLHHE
- PFCLHHF
- PFCLHHG
- PFCLHHH
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 3 Days or Less
- 4 Days or Less
- 10 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Bearing housings / compact flange / through holes / circlip / deep groove ball bearing / steel, stainless steel / black oxide, nickel plated
MISUMI Standard Price : 19.07 € Shipping Days: Same day
-
Timing belt pulleys / MXL / flanged pulley selectable / configurable / material selectable / treatment selectable
MISUMI Shipping Days: 6 Days
-
Track rollers with PUR tread / with holes for fixing screw
MISUMI Standard Price : 10.93 € Shipping Days: Same day
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.