Anti-vibration mats / studded / equipment dampers / can be cut to size / silicone / ASKER C30

Anti-vibration mats / studded / equipment dampers / can be cut to size / silicone / ASKER C30

Click on this image to zoom in.

Click on this image to zoom in.

  • Volume Discount
Silicone is used for the vibration isolator, which has less settling than rubber and is effective for anti-vibration against light loads and slight vibrations.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Antivibration Gel Sheets/without Adhesive:Related Image

Type  Material  Hardness
No AdhesiveAdhesiveNo AdhesiveAdhesiveAsker CPenetration
BGEPGBGEPGASiliconeSilicone-55
BGEPMBGEPMA30-
The values of hardness are reference values.

Specifications

Part Number
BGEPG50
TypeAaProper Load N {kgf}Deflection Characteristic N/mm {kgf/mm}Frequency Used HzProtrusionColorUnit Price
No AdhesiveAdhesiveNo AdhesiveAdhesive
BGEPGBGEPGA50719.6~49 {2~5}22 {2.25}40~4x4=16 pcs.Milky White  
BGEPMBGEPMA49~294 {5~30}93 {9.5}Light Green
BGEPGBGEPGA100898~196 {10~20}98 {10}8x8=64 pcs.Milky White  
BGEPMBGEPMA196~1225 {20~125}431 {44}Light Green
Can be cut with a utility knife between protrusions.
Adhesive Type has an operating temperature between -40 and 100°C.
Reference: Adhesive Strength (180° Peeling Strength) 14.5N/25mm Width (When affixed to EN 1.4301 Equiv.)
As pressure sensitive adhesive is used, be sure to apply sufficient pressure so that the joint sections may firmly adhere to each other.
Adhesive Type uses 75µm PET film base material. Oil may ooze out to the backing paper.
kgf=N×0.101972

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
BGEPG50
BGEPG100
BGEPGA50
BGEPGA100
BGEPM50
BGEPM100
BGEPMA50
BGEPMA100
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaximum Operating Load
(N)
Height H
(mm)
Operating Temperature Range
(°C)
Body Color Applied Load
(N)
Adhesive Seal Length A
(mm)

11.21 €

1 Available Same day

Stock

10497-40~200Milky White19.6~49No Adhesive50

37.23 €

1 Available Same day

Stock

101967-40~200Milky White98~196No Adhesive100

14.31 €

1 Available 5 Days 1049--40~100Milky White19.6~49With Seal50

47.33 €

1 Available 5 Days 10196--40~100Milky White98~196With Seal100

11.21 €

1 Available Same day

Stock

102947-40~200Light Green49~294No Adhesive50

37.23 €

1 Available 5 Days 1012257-40~200Light Green196~1225No Adhesive100

14.31 €

1 Available 5 Days 10294--40~100Light Green49~294With Seal50

47.33 €

1 Available 5 Days 101225--40~100Light Green196~1225With Seal100

Loading...

  1. 1

More Information

Antivibration Gel Sheets/without Adhesive:Related Image
■Cautions
· The height becomes lower due to being compressed when loaded.
· Do not remove the rubber burrs around the studs as the burrs prevent separations of studs and antivibration materials.
· Antivibration Gel and Rubber are designed to be used in compression.

Example of Use

Antivibration Gel Sheets/without Adhesive:Related Image

Basic information

Type Washers with Antivibration Gel Application Vibration Control Properties Durability / Weather Resistance / Water Resistance / Oil Resistance / Ozone Resistance
Antivibration Gel Type Sheet Material Silicone Applicable Frequency Range(Hz) 40::

Complementary Products

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360