• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Manifold Pneumatic / Outlets 1 Side / 2 Inlets

Manifold Pneumatic / Outlets 1 Side / 2 Inlets

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Manifold Pneumatic/Outlets 1 Side/2 Inlets:Related Image

Type Material Surface TreatmentMax. Operating Pressure
Pitch (P) StandardPitch (P) Configurable
20 Sq.30 Sq.40 Sq.60 Sq.20 Sq.30 Sq.40 Sq.
BMSFCBMSFBMSFLBMSFBBMSFCPBMSFPBMSFLPAluminum Alloy 5000 series-1MPa≈10kgf/cm2 or less
BMSFCABMSFABMSFLA-BMSFCAPBMSFAPBMSFLAPClear Anodize
Material of 60 Sq. is EN AW-6063 Equiv.

Specifications

Part Number-Q-G-K-P  
 
Type Mounting Hole Change Number of
Circuits
BMSF
BMSFLP
G-BMSFLP		T
ZT
ZT		 5
5
5		-
-
-		Q2
Q2
Q2		-
-
-		G1
G3
G3		-
-
-		K2
K3
K3
-
-
P50
P50		 

(G Thread)
Part NumberRc (PT), NPT, M (Coarse) SelectionPitch PNumber of Pitches
N		Total Number of
Q, G and K Threads		ABEFXYMounting Hole
TypeMounting Hole ChangeNumber of CircuitsQG, KStandardConfigurable 1mm IncrementM
(20 Sq.)T (Tapped)11 (1/8)
M3 (M3)
M4 (M4)
5 (M5)		1 (1/8)
M3 (M3)
M4 (M4)
5 (M5)		--032020201354M5

Pitch Standard

BMSFC

BMSFCA		Pitch Configurable

BMSFCP

BMSFCAP		21515~5014
325
436
547
658
71 (1/8)69
815~35710
(30 Sq.)ZB (Back Surface Counterbore)


NA (Through)


T (Tapped)


ZT (Counterbore Tapped)		11 (1/8)
2 (1/4)
5 (M5)
1N (NPT1/8)
2N (NPT1/4)		1 (1/8)
2 (1/4)
5 (M5)*
1N (NPT1/8)
2N (NPT1/4)		--03303020207.57M5
Pitch Standard

BMSF

BMSFA		Pitch Configurable

BMSFP

BMSFAP		23020~5014
325
436
547
658
7*69
8*20~35710
(40 Sq.)11 (1/8)
2 (1/4)
3 (3/8)
4 (1/2)		2 (1/4)
3 (3/8)
4 (1/2)		--034040252577M6
Pitch Standard

BMSFL

BMSFLA		Pitch Configurable

BMSFLP

BMSFLAP		24035~6014
325
436
547
658
735~5069
835~40710
(60 Sq.)16 (3/4)
8 (1)		8 (1)--0360604035259M8
Pitch Standard
BMSFB		 26014
325
436
By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering. (Ex.: G-BMBF) For ordering, see the Ordering Example.
For Q, G and K, specify 1, 2, 3, 4, 5, 6, 8, M3, M4, 1N, or 2N indicated before ( ). Single Circuit is not available for Pitch Configurable Type.
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right. (Except for 20 Sq.)
When * marked 7 or 8 Circuit is selected from 30 Sq., 5(M5) is not available for G or K. For G and K of 20 Sq. Pitch Configurable Type, M3, M4 or 5 (M5) are not selectable.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
BMSF1-[Q1N,​Q2N]-[G1N,​G2N]-[K1N,​K2N]
BMSF1-[Q1N,​Q2N]-[G1N,​G2N]-K[1,​2,​5]
BMSF1-[Q1N,​Q2N]-G[1,​2,​5]-[K1N,​K2N]
BMSF1-[Q1N,​Q2N]-G[1,​2,​5]-K[1,​2,​5]
BMSF1-Q[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMSF1-Q[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMSF1-Q[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMSF1-Q[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMSF2-[Q1N,​Q2N]-[G1N,​G2N]-[K1N,​K2N]
BMSF2-[Q1N,​Q2N]-[G1N,​G2N]-K[1,​2,​5]
BMSF2-[Q1N,​Q2N]-G[1,​2,​5]-[K1N,​K2N]
BMSF2-[Q1N,​Q2N]-G[1,​2,​5]-K[1,​2,​5]
BMSF2-Q[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMSF2-Q[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMSF2-Q[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMSF2-Q[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMSF3-[Q1N,​Q2N]-[G1N,​G2N]-[K1N,​K2N]
BMSF3-[Q1N,​Q2N]-[G1N,​G2N]-K[1,​2,​5]
BMSF3-[Q1N,​Q2N]-G[1,​2,​5]-[K1N,​K2N]
BMSF3-[Q1N,​Q2N]-G[1,​2,​5]-K[1,​2,​5]
BMSF3-Q[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMSF3-Q[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMSF3-Q[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMSF3-Q[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMSF4-[Q1N,​Q2N]-[G1N,​G2N]-[K1N,​K2N]
BMSF4-[Q1N,​Q2N]-[G1N,​G2N]-K[1,​2,​5]
BMSF4-[Q1N,​Q2N]-G[1,​2,​5]-[K1N,​K2N]
BMSF4-[Q1N,​Q2N]-G[1,​2,​5]-K[1,​2,​5]
BMSF4-Q[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMSF4-Q[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMSF4-Q[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMSF4-Q[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMSF5-[Q1N,​Q2N]-[G1N,​G2N]-[K1N,​K2N]
BMSF5-[Q1N,​Q2N]-[G1N,​G2N]-K[1,​2,​5]
BMSF5-[Q1N,​Q2N]-G[1,​2,​5]-[K1N,​K2N]
BMSF5-[Q1N,​Q2N]-G[1,​2,​5]-K[1,​2,​5]
BMSF5-Q[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMSF5-Q[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMSF5-Q[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMSF5-Q[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMSF6-[Q1N,​Q2N]-[G1N,​G2N]-[K1N,​K2N]
BMSF6-[Q1N,​Q2N]-[G1N,​G2N]-K[1,​2,​5]
BMSF6-[Q1N,​Q2N]-G[1,​2,​5]-[K1N,​K2N]
BMSF6-[Q1N,​Q2N]-G[1,​2,​5]-K[1,​2,​5]
BMSF6-Q[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMSF6-Q[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMSF6-Q[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMSF6-Q[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMSF7-[Q1N,​Q2N]-[G1N,​G2N]-[K1N,​K2N]
BMSF7-[Q1N,​Q2N]-[G1N,​G2N]-K[1,​2,​5]
BMSF7-[Q1N,​Q2N]-G[1,​2,​5]-[K1N,​K2N]
BMSF7-[Q1N,​Q2N]-G[1,​2,​5]-K[1,​2,​5]
BMSF7-Q[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMSF7-Q[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMSF7-Q[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMSF7-Q[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMSF8-[Q1N,​Q2N]-[G1N,​G2N]-[K1N,​K2N]
BMSF8-[Q1N,​Q2N]-[G1N,​G2N]-K[1,​2,​5]
BMSF8-[Q1N,​Q2N]-G[1,​2,​5]-[K1N,​K2N]
BMSF8-[Q1N,​Q2N]-G[1,​2,​5]-K[1,​2,​5]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSSurface Treatment Block Size
(mm) 		Number of Circuits
(Circuits) 		Thread Size / Type Mounting Hole Change Pitch P
(mm) 		Pitch Standard / Configurable Drawing G Part Thread Dia. NPT Selection [G] Drawing K Part Thread Dia. NPT Selection [K] Drawing Q Part Thread Dia. NPT Selection [Q] Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4) Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] [KM] 3(M3) 4(M4) Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4) Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 8(1) Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 8(1) Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)

-

1 8 Days 10Not Provided30 x 301Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]1/4 [K2N] / 1/8 [K1N]1/4 [Q2N] / 1/8 [Q1N]------

-

1 8 Days 10Not Provided30 x 301Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]-1/4 [Q2N] / 1/8 [Q1N]----1 ～ 5-

-

1 8 Days 10Not Provided30 x 301Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type-1/4 [K2N] / 1/8 [K1N]1/4 [Q2N] / 1/8 [Q1N]---1 ～ 5--

-

1 8 Days 10Not Provided30 x 301Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type--1/4 [Q2N] / 1/8 [Q1N]---1 ～ 51 ～ 5-

-

1 8 Days 10Not Provided30 x 301Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]1/4 [K2N] / 1/8 [K1N]------1 ～ 5

-

1 8 Days 10Not Provided30 x 301Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]------1 ～ 51 ～ 5

-

1 8 Days 10Not Provided30 x 301Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type-1/4 [K2N] / 1/8 [K1N]----1 ～ 5-1 ～ 5

-

1 8 Days 10Not Provided30 x 301Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type------1 ～ 51 ～ 51 ～ 5

-

1 8 Days 10Not Provided30 x 302Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]1/4 [K2N] / 1/8 [K1N]1/4 [Q2N] / 1/8 [Q1N]------

-

1 8 Days 10Not Provided30 x 302Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]-1/4 [Q2N] / 1/8 [Q1N]----1 ～ 5-

-

1 8 Days 10Not Provided30 x 302Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type-1/4 [K2N] / 1/8 [K1N]1/4 [Q2N] / 1/8 [Q1N]---1 ～ 5--

-

1 8 Days 10Not Provided30 x 302Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type--1/4 [Q2N] / 1/8 [Q1N]---1 ～ 51 ～ 5-

-

1 8 Days 10Not Provided30 x 302Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]1/4 [K2N] / 1/8 [K1N]------1 ～ 5

-

1 8 Days 10Not Provided30 x 302Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]------1 ～ 51 ～ 5

-

1 8 Days 10Not Provided30 x 302Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type-1/4 [K2N] / 1/8 [K1N]----1 ～ 5-1 ～ 5

-

1 8 Days 10Not Provided30 x 302Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type------1 ～ 51 ～ 51 ～ 5

-

1 8 Days 10Not Provided30 x 303Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]1/4 [K2N] / 1/8 [K1N]1/4 [Q2N] / 1/8 [Q1N]------

-

1 8 Days 10Not Provided30 x 303Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]-1/4 [Q2N] / 1/8 [Q1N]----1 ～ 5-

-

1 8 Days 10Not Provided30 x 303Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type-1/4 [K2N] / 1/8 [K1N]1/4 [Q2N] / 1/8 [Q1N]---1 ～ 5--

-

1 8 Days 10Not Provided30 x 303Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type--1/4 [Q2N] / 1/8 [Q1N]---1 ～ 51 ～ 5-

-

1 8 Days 10Not Provided30 x 303Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]1/4 [K2N] / 1/8 [K1N]------1 ～ 5

-

1 8 Days 10Not Provided30 x 303Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]------1 ～ 51 ～ 5

-

1 8 Days 10Not Provided30 x 303Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type-1/4 [K2N] / 1/8 [K1N]----1 ～ 5-1 ～ 5

-

1 8 Days 10Not Provided30 x 303Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type------1 ～ 51 ～ 51 ～ 5

-

1 8 Days 10Not Provided30 x 304Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]1/4 [K2N] / 1/8 [K1N]1/4 [Q2N] / 1/8 [Q1N]------

-

1 8 Days 10Not Provided30 x 304Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]-1/4 [Q2N] / 1/8 [Q1N]----1 ～ 5-

-

1 8 Days 10Not Provided30 x 304Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type-1/4 [K2N] / 1/8 [K1N]1/4 [Q2N] / 1/8 [Q1N]---1 ～ 5--

-

1 8 Days 10Not Provided30 x 304Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type--1/4 [Q2N] / 1/8 [Q1N]---1 ～ 51 ～ 5-

-

1 8 Days 10Not Provided30 x 304Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]1/4 [K2N] / 1/8 [K1N]------1 ～ 5

-

1 8 Days 10Not Provided30 x 304Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]------1 ～ 51 ～ 5

-

1 8 Days 10Not Provided30 x 304Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type-1/4 [K2N] / 1/8 [K1N]----1 ～ 5-1 ～ 5

-

1 8 Days 10Not Provided30 x 304Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type------1 ～ 51 ～ 51 ～ 5

-

1 8 Days 10Not Provided30 x 305Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]1/4 [K2N] / 1/8 [K1N]1/4 [Q2N] / 1/8 [Q1N]------

-

1 8 Days 10Not Provided30 x 305Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]-1/4 [Q2N] / 1/8 [Q1N]----1 ～ 5-

-

1 8 Days 10Not Provided30 x 305Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type-1/4 [K2N] / 1/8 [K1N]1/4 [Q2N] / 1/8 [Q1N]---1 ～ 5--

-

1 8 Days 10Not Provided30 x 305Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type--1/4 [Q2N] / 1/8 [Q1N]---1 ～ 51 ～ 5-

-

1 8 Days 10Not Provided30 x 305Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]1/4 [K2N] / 1/8 [K1N]------1 ～ 5

-

1 8 Days 10Not Provided30 x 305Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]------1 ～ 51 ～ 5

-

1 8 Days 10Not Provided30 x 305Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type-1/4 [K2N] / 1/8 [K1N]----1 ～ 5-1 ～ 5

-

1 8 Days 10Not Provided30 x 305Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type------1 ～ 51 ～ 51 ～ 5

-

1 8 Days 10Not Provided30 x 306Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]1/4 [K2N] / 1/8 [K1N]1/4 [Q2N] / 1/8 [Q1N]------

-

1 8 Days 10Not Provided30 x 306Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]-1/4 [Q2N] / 1/8 [Q1N]----1 ～ 5-

-

1 8 Days 10Not Provided30 x 306Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type-1/4 [K2N] / 1/8 [K1N]1/4 [Q2N] / 1/8 [Q1N]---1 ～ 5--

-

1 8 Days 10Not Provided30 x 306Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type--1/4 [Q2N] / 1/8 [Q1N]---1 ～ 51 ～ 5-

-

1 8 Days 10Not Provided30 x 306Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]1/4 [K2N] / 1/8 [K1N]------1 ～ 5

-

1 8 Days 10Not Provided30 x 306Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]------1 ～ 51 ～ 5

-

1 8 Days 10Not Provided30 x 306Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type-1/4 [K2N] / 1/8 [K1N]----1 ～ 5-1 ～ 5

-

1 8 Days 10Not Provided30 x 306Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type------1 ～ 51 ～ 51 ～ 5

-

1 8 Days 10Not Provided30 x 307Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]1/4 [K2N] / 1/8 [K1N]1/4 [Q2N] / 1/8 [Q1N]------

-

1 8 Days 10Not Provided30 x 307Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]-1/4 [Q2N] / 1/8 [Q1N]----1 ～ 5-

-

1 8 Days 10Not Provided30 x 307Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type-1/4 [K2N] / 1/8 [K1N]1/4 [Q2N] / 1/8 [Q1N]---1 ～ 5--

-

1 8 Days 10Not Provided30 x 307Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type--1/4 [Q2N] / 1/8 [Q1N]---1 ～ 51 ～ 5-

-

1 8 Days 10Not Provided30 x 307Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]1/4 [K2N] / 1/8 [K1N]------1 ～ 5

-

1 8 Days 10Not Provided30 x 307Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]------1 ～ 51 ～ 5

-

1 8 Days 10Not Provided30 x 307Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type-1/4 [K2N] / 1/8 [K1N]----1 ～ 5-1 ～ 5

-

1 8 Days 10Not Provided30 x 307Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type------1 ～ 51 ～ 51 ～ 5

-

1 8 Days 10Not Provided30 x 308Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]1/4 [K2N] / 1/8 [K1N]1/4 [Q2N] / 1/8 [Q1N]------

-

1 8 Days 10Not Provided30 x 308Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type1/4 [G2N] / 1/8 [G1N]-1/4 [Q2N] / 1/8 [Q1N]----1 ～ 5-

-

1 8 Days 10Not Provided30 x 308Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type-1/4 [K2N] / 1/8 [K1N]1/4 [Q2N] / 1/8 [Q1N]---1 ～ 5--

-

1 8 Days 10Not Provided30 x 308Standard Thread {PT, m (Coarse) Thread}Not Specified (Front Surface Counterbore)30Fixed Type--1/4 [Q2N] / 1/8 [Q1N]---1 ～ 51 ～ 5-

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
 

Basic information

Shape Blind Lateral Hole, Upper Hole Material EN AW-5052 Equiv. Application Pneumatic

Configure

Clear all

2,044Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Surface Treatment

    • Not Provided
    • Clear Anodized Aluminum

    Clear

  • Block Size(mm)

    • 20 x 20
    • 30 x 30
    • 40 x 40
    • 60 x 60

    Clear

  • Number of Circuits(Circuits)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8

    Clear

  • Thread Size / Type

    • G (PF) Thread
    • Standard Thread {PT, m (Coarse) Thread}

    Clear

  • Mounting Hole Change

    • NA (Through)
    • Not Specified (Front Surface Counterbore)
    • Not Specified (Through)
    • T (Tapped)
    • ZB (Back Surface Counterbore)
    • ZT (Counterbore Tapped)

    Clear

  • Pitch P(mm)

    • 15
    • 25
    • 30
    • 40
    • 60

     [15-60/1mm Unit(s)]

    Clear

  • Pitch Standard / Configurable

    • Configurable Type
    • Fixed Type

    Clear

  • Drawing G Part Thread Dia. NPT Selection [G]

    • 1/4 [G2N]
    • 1/8 [G1N]

    Clear

  • Drawing K Part Thread Dia. NPT Selection [K]

    • 1/4 [K2N]
    • 1/8 [K1N]

    Clear

  • Drawing Q Part Thread Dia. NPT Selection [Q]

    • 1/4 [Q2N]
    • 1/8 [Q1N]

    Clear

  • Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4)

    • 3
    • 4

    Clear

  • Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] [KM] 3(M3) 4(M4)

    • 3
    • 4

    Clear

  • Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)

    • 3
    • 4

    Clear

  • Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 8(1)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 8

    Clear

  • Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 8(1)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 8

    Clear

  • Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 8

    Clear

  • Type

    • BMSF
    • BMSFA
    • BMSFAP
    • BMSFB
    • BMSFC
    • BMSFCA
    • BMSFCAP
    • BMSFCP
    • BMSFL
    • BMSFLA
    • BMSFLAP
    • BMSFLP
    • BMSFP
    • G-BMSF
    • G-BMSFA
    • G-BMSFAP
    • G-BMSFB
    • G-BMSFC
    • G-BMSFCA
    • G-BMSFCAP
    • G-BMSFCP
    • G-BMSFL
    • G-BMSFLA
    • G-BMSFLAP
    • G-BMSFLP
    • G-BMSFP

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 7 Days or Less
    • 8 Days or Less
    • 9 Days or Less
    • 10 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.