Terminal Blocks / Pneumatic / Outlets 2 Sides / No Inlets

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Terminal Blocks/Pneumatic/Outlets 2 Sides/No Inlets:Related Image

TypeMaterialSurface TreatmentMax. Operating Pressure
Pitch (P) StandardPitch (P) Configurable
15 Sq.20 Sq.25 Sq.35 Sq.50 Sq.20 Sq.25 Sq.35 Sq.50 Sq.
BTLASBTLACBTLABTLAKBTLALBTLACPBTLAPBTLAKPBTLALPAluminum Alloy 5000 series-1MPa≈10kgf/cm2 or less
-BTLACABTLAA--BTLACAPBTLAAPBTLAAKPBTLALAPClear Anodize
Material of 15 Sq. is EN AW-6063 Equiv.

Specifications

Part Number-Q-R-P
TypeMounting Hole ChangeNumber of Circuits
BTLS
BTLSFLP
BTLA
BTLAP
G-BTLAP

NA
T
ZT
ZT
5
4
4
5
5
-
-
-
-
-
Q3
Q4
Q2
Q2
Q2
-
-
-
-
-
R2
R3
R1
R2
R2

-

-
-

P50

P50
P50




(G Thread)
Part NumberRc (PT), NPT, M (Coarse) SelectionPitch PNumber of Pitches
N
Total Number of Q and R ThreadsABEFXYMounting Hole
TypeMounting Hole ChangeNumber of CircuitsQ, RStandardConfigurable 1mm IncrementM
(15 Sq.)T (Tapped)1M3 (M3)
M4 (M4)
5 (M5)
--021515157.553.5M4
Pitch Standard
BTLAS
21514
326
438
5410
6512
7614
8716
(20 Sq.)11 (1/8)
M3 (M3)
M4 (M4)
5 (M5)
--022020201054M5
Pitch Standard
BTLAC

BTLACA
Pitch Configurable
BTLACP

BTLACAP
21515~5014
326
438
5410
6512
7614
8716
(25 Sq.)NA (Through)


T
(Tapped)


ZT
(Counterbore Tapped)
11 (1/8)
2 (1/4)
5 (M5)
1N (NPT1/8)
2N (NPT1/4)
--0225252012.57.57M5
Pitch Standard
BTLA

BTLAA
Pitch Configurable
BTLAP

BTLAAP
22520~6014
326
438
5410
625~60512
7614
8716
(35 Sq.)11 (1/8)
2
(1/4)
5 (M5)
1N (NPT1/8)
2N (NPT1/4)
--0235352017.57.57M5
Pitch Standard
BTLAK

Pitch Configurable
BTLAKP

BTLAAKP
22520~6014
326
438
5410
625~60512
7614
8716
(50 Sq.)12 (1/4)
3
(3/8)
4 (1/2)
--02505025258.58.5M8
Pitch Standard
BTLAL

Pitch Configurable
BTLALP

BTLALAP
24035~6014
326
438
5410
6512
By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering. (Ex.: G-BTLA) For ordering, see the Ordering Example.
For Q and R, specify 1, 2, 3, 4, 5, M3, M4, 1N or 2N indicated before ( ). Single Circuit is not available for Pitch Configurable Type.
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. For mounting hole change of 15 Sq. and 20 Sq., only Tapped Hole is applicable.
Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right. (Except 15 and 20 Sq.)
For Block Square □25 Type, when 1/4 is selected for both tapered threads at right angles, the tapered male threads may interfere with each other. Select Block Square □35 Type instead.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
BTLA1-[Q1N,​Q2N]-[R1N,​R2N]
BTLA1-[Q1N,​Q2N]-R[1,​2,​5]
BTLA1-Q[1,​2,​5]-[R1N,​R2N]
BTLA1-Q[1,​2,​5]-R[1,​2,​5]
BTLA2-[Q1N,​Q2N]-[R1N,​R2N]
BTLA2-[Q1N,​Q2N]-R[1,​2,​5]
BTLA2-Q[1,​2,​5]-[R1N,​R2N]
BTLA2-Q[1,​2,​5]-R[1,​2,​5]
BTLA3-[Q1N,​Q2N]-[R1N,​R2N]
BTLA3-[Q1N,​Q2N]-R[1,​2,​5]
BTLA3-Q[1,​2,​5]-[R1N,​R2N]
BTLA3-Q[1,​2,​5]-R[1,​2,​5]
BTLA4-[Q1N,​Q2N]-[R1N,​R2N]
BTLA4-[Q1N,​Q2N]-R[1,​2,​5]
BTLA4-Q[1,​2,​5]-[R1N,​R2N]
BTLA4-Q[1,​2,​5]-R[1,​2,​5]
BTLA5-[Q1N,​Q2N]-[R1N,​R2N]
BTLA5-[Q1N,​Q2N]-R[1,​2,​5]
BTLA5-Q[1,​2,​5]-[R1N,​R2N]
BTLA5-Q[1,​2,​5]-R[1,​2,​5]
BTLA6-[Q1N,​Q2N]-[R1N,​R2N]
BTLA6-[Q1N,​Q2N]-R[1,​2,​5]
BTLA6-Q[1,​2,​5]-[R1N,​R2N]
BTLA6-Q[1,​2,​5]-R[1,​2,​5]
BTLA7-[Q1N,​Q2N]-[R1N,​R2N]
BTLA7-[Q1N,​Q2N]-R[1,​2,​5]
BTLA7-Q[1,​2,​5]-[R1N,​R2N]
BTLA7-Q[1,​2,​5]-R[1,​2,​5]
BTLA8-[Q1N,​Q2N]-[R1N,​R2N]
BTLA8-[Q1N,​Q2N]-R[1,​2,​5]
BTLA8-Q[1,​2,​5]-[R1N,​R2N]
BTLA8-Q[1,​2,​5]-R[1,​2,​5]
BTLAA1-[Q1N,​Q2N]-[R1N,​R2N]
BTLAA1-[Q1N,​Q2N]-R[1,​2,​5]
BTLAA1-Q[1,​2,​5]-[R1N,​R2N]
BTLAA1-Q[1,​2,​5]-R[1,​2,​5]
BTLAA2-[Q1N,​Q2N]-[R1N,​R2N]
BTLAA2-[Q1N,​Q2N]-R[1,​2,​5]
BTLAA2-Q[1,​2,​5]-[R1N,​R2N]
BTLAA2-Q[1,​2,​5]-R[1,​2,​5]
BTLAA3-[Q1N,​Q2N]-[R1N,​R2N]
BTLAA3-[Q1N,​Q2N]-R[1,​2,​5]
BTLAA3-Q[1,​2,​5]-[R1N,​R2N]
BTLAA3-Q[1,​2,​5]-R[1,​2,​5]
BTLAA4-[Q1N,​Q2N]-[R1N,​R2N]
BTLAA4-[Q1N,​Q2N]-R[1,​2,​5]
BTLAA4-Q[1,​2,​5]-[R1N,​R2N]
BTLAA4-Q[1,​2,​5]-R[1,​2,​5]
BTLAA5-[Q1N,​Q2N]-[R1N,​R2N]
BTLAA5-[Q1N,​Q2N]-R[1,​2,​5]
BTLAA5-Q[1,​2,​5]-[R1N,​R2N]
BTLAA5-Q[1,​2,​5]-R[1,​2,​5]
BTLAA6-[Q1N,​Q2N]-[R1N,​R2N]
BTLAA6-[Q1N,​Q2N]-R[1,​2,​5]
BTLAA6-Q[1,​2,​5]-[R1N,​R2N]
BTLAA6-Q[1,​2,​5]-R[1,​2,​5]
BTLAA7-[Q1N,​Q2N]-[R1N,​R2N]
BTLAA7-[Q1N,​Q2N]-R[1,​2,​5]
BTLAA7-Q[1,​2,​5]-[R1N,​R2N]
BTLAA7-Q[1,​2,​5]-R[1,​2,​5]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Surface Treatment Block Size
(mm)
Number of Circuits
(Circuits)
Thread Size / Type Mounting Hole Change Pitch P
(mm)
Pitch Standard / Configurable Drawing Q Part Thread Dia. NPT Selection [Q] Drawing R Part Thread Dia. NPT Selection [R] Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4) Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4) Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]1/4 [R2N] / 1/8 [R1N]----

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type-1/4 [R2N] / 1/8 [R1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]1/4 [R2N] / 1/8 [R1N]----

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type-1/4 [R2N] / 1/8 [R1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]1/4 [R2N] / 1/8 [R1N]----

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type-1/4 [R2N] / 1/8 [R1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]1/4 [R2N] / 1/8 [R1N]----

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type-1/4 [R2N] / 1/8 [R1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 255Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]1/4 [R2N] / 1/8 [R1N]----

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 255Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 255Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type-1/4 [R2N] / 1/8 [R1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 255Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 256Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]1/4 [R2N] / 1/8 [R1N]----

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 256Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 256Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type-1/4 [R2N] / 1/8 [R1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 256Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 257Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]1/4 [R2N] / 1/8 [R1N]----

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 257Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 257Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type-1/4 [R2N] / 1/8 [R1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 257Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 258Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]1/4 [R2N] / 1/8 [R1N]----

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 258Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 258Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type-1/4 [R2N] / 1/8 [R1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Not Provided25 x 258Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]1/4 [R2N] / 1/8 [R1N]----

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type-1/4 [R2N] / 1/8 [R1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 251Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]1/4 [R2N] / 1/8 [R1N]----

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type-1/4 [R2N] / 1/8 [R1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 252Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]1/4 [R2N] / 1/8 [R1N]----

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type-1/4 [R2N] / 1/8 [R1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 253Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]1/4 [R2N] / 1/8 [R1N]----

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type-1/4 [R2N] / 1/8 [R1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 254Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 255Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]1/4 [R2N] / 1/8 [R1N]----

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 255Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 255Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type-1/4 [R2N] / 1/8 [R1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 255Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 256Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]1/4 [R2N] / 1/8 [R1N]----

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 256Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 256Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type-1/4 [R2N] / 1/8 [R1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 256Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type----1 ~ 51 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 257Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]1/4 [R2N] / 1/8 [R1N]----

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 257Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type1/4 [Q2N] / 1/8 [Q1N]----1 ~ 5

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 257Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type-1/4 [R2N] / 1/8 [R1N]--1 ~ 5-

-

1 8 Days 10EN AW-5052 Equiv.Clear Anodized Aluminum25 x 257Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)40Fixed Type----1 ~ 51 ~ 5

Loading...

Basic information

Shape Intlets - None Outlets - Top & Side Application Pneumatic

Complementary Products

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360