Terminal Blocks / Hydraulic / Outlets 2 Sides / No Inlets

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Terminal Blocks/Hydraulic/Outlets 2 Sides/No Inlets:Related Image

TypeMaterialSurface TreatmentMax. Operating Pressure
Pitch (P) StandardPitch (P) Configurable
20 Sq.30x35 Sq.50 Sq.60 Sq.20 Sq.30x35 Sq.50 Sq.
BTSBBTSBTSFLBTSL-BTSPBTSFLPEN 1.0038 Equiv.Trivalent Chromate20.6MPa≈210kgf/cm2 or less
BTSBMBTSMBTSFLM----Electroless Nickel Plating
BTSBRBTSRBTSFLR-BTSBRPBTSRPBTSFLRPEN 1.4301 Equiv.-
-BTSS-----EN 1.4401 Equiv.
-BTSC-----Brass1MPa≈10kgf/cm2 or less
BTSSP (EN 1.4401 Equiv., 30x35 Sq., Pitch Configurable) is available on our website.

Specifications

Part Number-R-S-P 
 
Type Mounting Hole Change Number of Circuits
BTS
BTSFLP
G-BTSFLP
 
NA
NA
 4
4
4
-
-
-
R3
R4
R4
-
-
-
S2
S3
S3

-
-

P50
P50

(G Thread)
Part NumberRc (PT), NPT SelectionPitch PNumber of Pitches
N
Total Number of R and S ThreadsABEXYMounting Hole
TypeMounting Hole ChangeNumber of CircuitsR, SStandardConfigurable 1mm IncrementM
(20 Sq.)NA (Through)


T (Tapped)


ZT (Counterbore Tapped)
11 (1/8)--022020207.510M5

Pitch Standard
BTSB
BTSBM
BTSBR


Pitch Configurable


BTSBRP

22515~5014
326
438
5410
6512
7614
8716
(30x35 Sq.)11 (1/8)
2 (1/4)
3 (3/8)
1N (NPT1/8)
2N (NPT1/4)
3N (NPT3/8)
--023035207.517.5M6
Pitch Standard
BTS
BTSM
BTSR
BTSS
BTSC
Pitch Configurable
BTSP

BTSRP


23525~5014
326
438
5410
6512
7614
8716
(50 Sq.)12 (1/4)
3 (3/8)
4 (1/2)
6 (3/4)
--025050307.525M8

Pitch Standard
BTSFL
BTSFLM
BTSFLR

Pitch Configurable
BTSFLP

BTSFLRP
26035~6014
326
438
5410
640~60512
(60 Sq.)16 (3/4)
8
(1)
--026060401030M8
Pitch Standard
BTSL
 26014
326
438
By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering. (Ex.: G-BTS) For ordering, see the Ordering Example.
For R and S, specify 1, 2, 3, 4, 6, 8, 1N, 2N or 3N indicated before ( ). Single Circuit is not available for Pitch Configurable Type.
SUS316 or Brass is for up to 6 connections.Specify the pitch taking into consideration the necessary dimensions for fitting the couplings.
Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right. (Except 20 Sq.)

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
BTS1-[R1N,​R2N,​R3N]-[S1N,​S2N,​S3N]
BTS1-[R1N,​R2N,​R3N]-S[1,​2,​3]
BTS1-R[1,​2,​3]-[S1N,​S2N,​S3N]
BTS1-R[1,​2,​3]-S[1,​2,​3]
BTS2-[R1N,​R2N,​R3N]-[S1N,​S2N,​S3N]
BTS2-[R1N,​R2N,​R3N]-S[1,​2,​3]
BTS2-R[1,​2,​3]-[S1N,​S2N,​S3N]
BTS2-R[1,​2,​3]-S[1,​2,​3]
BTS3-[R1N,​R2N,​R3N]-[S1N,​S2N,​S3N]
BTS3-[R1N,​R2N,​R3N]-S[1,​2,​3]
BTS3-R[1,​2,​3]-[S1N,​S2N,​S3N]
BTS3-R[1,​2,​3]-S[1,​2,​3]
BTS4-[R1N,​R2N,​R3N]-[S1N,​S2N,​S3N]
BTS4-[R1N,​R2N,​R3N]-S[1,​2,​3]
BTS4-R[1,​2,​3]-[S1N,​S2N,​S3N]
BTS4-R[1,​2,​3]-S[1,​2,​3]
BTS5-[R1N,​R2N,​R3N]-[S1N,​S2N,​S3N]
BTS5-[R1N,​R2N,​R3N]-S[1,​2,​3]
BTS5-R[1,​2,​3]-[S1N,​S2N,​S3N]
BTS5-R[1,​2,​3]-S[1,​2,​3]
BTS6-[R1N,​R2N,​R3N]-[S1N,​S2N,​S3N]
BTS6-[R1N,​R2N,​R3N]-S[1,​2,​3]
BTS6-R[1,​2,​3]-[S1N,​S2N,​S3N]
BTS6-R[1,​2,​3]-S[1,​2,​3]
BTS7-[R1N,​R2N,​R3N]-[S1N,​S2N,​S3N]
BTS7-[R1N,​R2N,​R3N]-S[1,​2,​3]
BTS7-R[1,​2,​3]-[S1N,​S2N,​S3N]
BTS7-R[1,​2,​3]-S[1,​2,​3]
BTS8-[R1N,​R2N,​R3N]-[S1N,​S2N,​S3N]
BTS8-[R1N,​R2N,​R3N]-S[1,​2,​3]
BTS8-R[1,​2,​3]-[S1N,​S2N,​S3N]
BTS8-R[1,​2,​3]-S[1,​2,​3]
BTSB1-R1-S1
BTSB2-R1-S1
BTSB3-R1-S1
BTSB4-R1-S1
BTSB5-R1-S1
BTSB6-R1-S1
BTSB7-R1-S1
BTSB8-R1-S1
BTSBM1-R1-S1
BTSBM2-R1-S1
BTSBM3-R1-S1
BTSBM4-R1-S1
BTSBM5-R1-S1
BTSBM6-R1-S1
BTSBM7-R1-S1
BTSBM8-R1-S1
BTSBMNA1-R1-S1
BTSBMNA2-R1-S1
BTSBMNA3-R1-S1
BTSBMNA4-R1-S1
BTSBMNA5-R1-S1
BTSBMNA6-R1-S1
BTSBMNA7-R1-S1
BTSBMNA8-R1-S1
BTSBMT1-R1-S1
BTSBMT2-R1-S1
BTSBMT3-R1-S1
BTSBMT4-R1-S1
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Surface Treatment Block Size
(mm)
Number of Circuits
(Circuits)
Thread Size / Type Mounting Hole Change Pitch P
(mm)
Pitch Standard / Configurable Application Drawing R Part Thread Dia. NPT Selection [R] Drawing S Part Thread Dia. NPT Selection [S] Select a value for PT/PF Thread Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1) Select a value for PT/PF Thread Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 351Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]--

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 351Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]--1 ~ 3

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 351Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure-1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]1 ~ 3-

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 351Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure--1 ~ 31 ~ 3

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 352Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]--

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 352Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]--1 ~ 3

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 352Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure-1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]1 ~ 3-

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 352Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure--1 ~ 31 ~ 3

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 353Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]--

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 353Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]--1 ~ 3

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 353Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure-1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]1 ~ 3-

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 353Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure--1 ~ 31 ~ 3

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 354Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]--

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 354Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]--1 ~ 3

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 354Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure-1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]1 ~ 3-

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 354Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure--1 ~ 31 ~ 3

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 355Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]--

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 355Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]--1 ~ 3

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 355Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure-1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]1 ~ 3-

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 355Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure--1 ~ 31 ~ 3

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 356Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]--

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 356Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]--1 ~ 3

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 356Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure-1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]1 ~ 3-

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 356Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure--1 ~ 31 ~ 3

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 357Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]--

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 357Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]--1 ~ 3

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 357Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure-1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]1 ~ 3-

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 357Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure--1 ~ 31 ~ 3

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 358Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]--

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 358Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]--1 ~ 3

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 358Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure-1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]1 ~ 3-

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate35 x 358Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)35Fixed TypeFor hydraulic / Water Pressure--1 ~ 31 ~ 3

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate20 x 201Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)-Fixed TypeFor hydraulic / Water Pressure--11

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate20 x 202Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate20 x 203Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate20 x 204Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate20 x 205Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate20 x 206Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate20 x 207Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 9 Days 10EN 1.0038 Equiv.Trivalent Chromate20 x 208Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 201Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)-Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 202Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 203Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 204Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 205Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 206Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 207Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 208Standard Thread {PT, m (Coarse) Thread}Not Specified (Counterbore)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 201Standard Thread {PT, m (Coarse) Thread}NA (Through)-Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 202Standard Thread {PT, m (Coarse) Thread}NA (Through)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 203Standard Thread {PT, m (Coarse) Thread}NA (Through)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 204Standard Thread {PT, m (Coarse) Thread}NA (Through)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 205Standard Thread {PT, m (Coarse) Thread}NA (Through)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 206Standard Thread {PT, m (Coarse) Thread}NA (Through)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 207Standard Thread {PT, m (Coarse) Thread}NA (Through)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 208Standard Thread {PT, m (Coarse) Thread}NA (Through)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 201Standard Thread {PT, m (Coarse) Thread}T (Tapped)-Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 202Standard Thread {PT, m (Coarse) Thread}T (Tapped)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 203Standard Thread {PT, m (Coarse) Thread}T (Tapped)25Fixed TypeFor hydraulic / Water Pressure--11

-

1 7 Days 10EN 1.0038 Equiv.Electroless Nickel Plating20 x 204Standard Thread {PT, m (Coarse) Thread}T (Tapped)25Fixed TypeFor hydraulic / Water Pressure--11

Loading...

Basic information

Shape Vertical Through Hole

Complementary Products

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360