- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
Manifold Hydraulic / Pneumatic / Outlets 3 Sides / 2 Inlets
Hydraulic manifold blocks. G (PF) thread machining can also be specified.
(i)Remark
- The standards for the BMFRS block square A60 type will be revised starting September 2021.
Before the standards are revised, the part number will be BMFRS□-60-□, and this will be discontinued in September 2022.
*After the standards are revised, the a and b dimensions will change from 10 mm to 8 mm.
Product URL for pre-revision specification:https://uk.misumi-ec.com/vona2/detail/110310530639/
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Type | Material | Surface Treatment | Max. Operating Pressure |
| BMFRS | Steel for General Structure | Trivalent Chromate | 20.6 MPa ≈ 210 kgf/cm2 or less |
| BMFRA | Aluminum Alloy | — | 1 MPa ≈ 10 kgf/cm2 or less |
| BMFRAA | Clear Anodize |
Specification Table
■ Selecting Method
The diameters of J and K are not changeable. When J and K are not needed, specify J0–K0. (This results in the removal of through holes. It is not possible to specify just J or just K as 0.)
[Step 1] Select the most frequently used thread diameter as basic thread diameter.
[Ordering Example] Select 4(1/2).
[Step 2] Select the ports needed to change from the basic thread diameter and the desired thread size.
[Ordering Example] D2-E2-G2-U0-V3-W3
(Ex.)
○ BMFRS4−60−4−J0−K0−D2
○ BMFRS4−60−4 −D2
× BMFRS4−60−4−J0−D2
× BMFRS4−60−4−K0−D2
The diameters of J and K are not changeable. When J and K are not needed, specify J0–K0. (This results in the removal of through holes. It is not possible to specify just J or just K as 0.)
[Step 1] Select the most frequently used thread diameter as basic thread diameter.
[Ordering Example] Select 4(1/2).
[Step 2] Select the ports needed to change from the basic thread diameter and the desired thread size.
[Ordering Example] D2-E2-G2-U0-V3-W3
(Ex.)
○ BMFRS4−60−4−J0−K0−D2
○ BMFRS4−60−4 −D2
× BMFRS4−60−4−J0−D2
× BMFRS4−60−4−K0−D2
| Part Number | — | A | — | Basic Thread Diameter | — | J | — | K | — | C | — | D | — | E | — | F | — | G | — | H | — | U | — | V | — | W | — | X | — | Y | — | Z | |
| BMFRS4 | — | 60 | — | 4 | — | D2 | — | E2 | — | G2 | — | U0 | — | V3 | — | W3 | |||||||||||||||||
| G−BMFRA4 | — | 30 | — | 2 | — | E1 | — | F1 | — | H1 | — | X1 | — | Y1 | — | Z1 | (G Thread) |
| Part Number | Block Square A | Basic Thread Diameter Rc (PT), M (Coarse) | Alternative Thread Size Selection Rc (PT), M (Coarse) | P | f | a | b | d | d1 | h | |||||||||
| Type | Number of Circuits | JK (0 only), CDEFGHUVWXYZ | |||||||||||||||||
| BMFRS BMFRA BMFRAA (Standard Change: 60N) | 2 3 4 | 25 | 5 (M5) | 1 (1/8) | 0 (No Hole) | 5 (M5) | 1 (1/8) | 20 | 16 | 8 | 5 | 4.5 | 8 | 4.5 | |||||
| 30 | 1 (1/8) | 2 (1/4) | 0 (No Hole) | 5 (M5) | 1 (1/8) | 2 (1/4) | 25 | 15 | 5 | 4.5 | 8 | 4.5 | |||||||
| 35 | 1 (1/8) | 2 (1/4) | 0 (No Hole) | 5 (M5) | 1 (1/8) | 2 (1/4) | 3 (3/8) | 30 | 20 | 6 | 5.5 | 9.5 | 5.5 | ||||||
| Combination of 3 and 3 is not available at right angles. | |||||||||||||||||||
| 40 | 2 (1/4) | 3 (3/8) | 0 (No Hole) | 5 (M5) | 1 (1/8) | 2 (1/4) | 3 (3/8) | 4 (1/2) | 40 | 22 | 6.5 | 6.6 | 11 | 6.5 | |||||
| Combination of 4 and 4 is not available at right angles. | |||||||||||||||||||
| 50 | 2 (1/4) | 3 (3/8) | 4 (1/2) | 0 (No Hole) | 5 (M5) | 1 (1/8) | 2 (1/4) | 3 (3/8) | 4 (1/2) | 6 (3/4) | 50 | 30 | 8 | 8.5 | 14 | 8.5 | |||
| Combination of 6 and 6 is not available at right angles. | |||||||||||||||||||
| 60N | 3 (3/8) | 4 (1/2) | 6 (3/4) | 0 (No Hole) | 5 (M5) | 1 (1/8) | 2 (1/4) | 3 (3/8) | 4 (1/2) | 6 (3/4) | 60 | 30 | 8 | 8.5 | 14 | 8.5 | |||
For thread diameter selection, specify 0, 5, 1, 2, 3, 4 or 6 indicated before ( ).
For the purposes of improved standardization, the former A dimension 60 has been changed to "60N." The a/b dimension standard of 8 mm was formerly 10 mm. The 10-mm standard will be discontinued in September 2022.
Old: BMFRS-60- New: BMFRS-60N-
Alterations
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Part Number
|
|---|
| BMFRA2-25-[1,5] |
| BMFRA2-30-[1,2] |
| BMFRA2-35-[1,2] |
| BMFRA2-40-[2,3] |
| BMFRA2-50-[2,3,4] |
| BMFRA3-25-[1,5] |
| BMFRA3-30-[1,2] |
| BMFRA3-35-[1,2] |
| BMFRA3-40-[2,3] |
| BMFRA3-50-[2,3,4] |
| BMFRA4-25-[1,5] |
| BMFRA4-30-[1,2] |
| BMFRA4-35-[1,2] |
| BMFRA4-40-[2,3] |
| BMFRA4-50-[2,3,4] |
| BMFRAA2-25-[1,5] |
| BMFRAA2-30-[1,2] |
| BMFRAA2-35-[1,2] |
| BMFRAA2-40-[2,3] |
| BMFRAA2-50-[2,3,4] |
| BMFRAA3-25-[1,5] |
| BMFRAA3-30-[1,2] |
| BMFRAA3-35-[1,2] |
| BMFRAA3-40-[2,3] |
| BMFRAA3-50-[2,3,4] |
| BMFRAA4-25-[1,5] |
| BMFRAA4-30-[1,2] |
| BMFRAA4-35-[1,2] |
| BMFRAA4-40-[2,3] |
| BMFRAA4-50-[2,3,4] |
| BMFRS2-30-[1,2] |
| BMFRS2-35-[1,2] |
| BMFRS2-40-[2,3] |
| BMFRS2-50-[2,3,4] |
| BMFRS3-30-[1,2] |
| BMFRS3-35-[1,2] |
| BMFRS3-40-[2,3] |
| BMFRS3-50-[2,3,4] |
| BMFRS4-30-[1,2] |
| BMFRS4-35-[1,2] |
| BMFRS4-40-[2,3] |
| BMFRS4-50-[2,3,4] |
| G-BMFRA2-25-[1,5] |
| G-BMFRA2-30-[1,2] |
| G-BMFRA2-35-[1,2] |
| G-BMFRA2-40-[2,3] |
| G-BMFRA2-50-[2,3,4] |
| G-BMFRA3-25-[1,5] |
| G-BMFRA3-30-[1,2] |
| G-BMFRA3-35-[1,2] |
| G-BMFRA3-40-[2,3] |
| G-BMFRA3-50-[2,3,4] |
| G-BMFRA4-25-[1,5] |
| G-BMFRA4-30-[1,2] |
| G-BMFRA4-35-[1,2] |
| G-BMFRA4-40-[2,3] |
| G-BMFRA4-50-[2,3,4] |
| G-BMFRAA2-25-[1,5] |
| G-BMFRAA2-30-[1,2] |
| G-BMFRAA2-35-[1,2] |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Material | Surface Treatment | Number of Circuits (Circuits) | Block Square A (mm) | Thread Size / Type | Application | Standard Thread Dia. Selection 1 (1/8) 2 (1/4) 3 (3/8) 4 (1/2) 5 (M5) 6 (3/4) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 2 | 25 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 2 | 30 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 2 | ||
- | 1 | 9 Days | 10 | EN AW-5052 Equiv. | Not Provided | 2 | 35 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 2 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 2 | 40 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 2 ～ 3 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 2 | 50 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 2 ～ 4 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 3 | 25 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 3 | 30 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 2 | ||
- | 1 | 9 Days | 10 | EN AW-5052 Equiv. | Not Provided | 3 | 35 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 2 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 3 | 40 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 2 ～ 3 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 3 | 50 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 2 ～ 4 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 4 | 25 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 4 | 30 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 2 | ||
- | 1 | 9 Days | 10 | EN AW-5052 Equiv. | Not Provided | 4 | 35 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 2 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 4 | 40 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 2 ～ 3 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 4 | 50 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 2 ～ 4 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 2 | 25 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 2 | 30 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 2 | ||
- | 1 | 9 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 2 | 35 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 2 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 2 | 40 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 2 ～ 3 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 2 | 50 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 2 ～ 4 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 3 | 25 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 3 | 30 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 2 | ||
- | 1 | 9 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 3 | 35 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 2 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 3 | 40 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 2 ～ 3 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 3 | 50 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 2 ～ 4 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 4 | 25 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 4 | 30 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 2 | ||
- | 1 | 9 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 4 | 35 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 1 ～ 2 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 4 | 40 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 2 ～ 3 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 4 | 50 | Standard Thread {PT, M (Coarse) Thread} | Pneumatic | 2 ～ 4 | ||
- | 1 | 9 Days | 10 | Steel for General Structure | Trivalent Chromate | 2 | 30 | Standard Thread {PT, M (Coarse) Thread} | For hydraulic / Water Pressure | 1 ～ 2 | ||
- | 1 | 9 Days | 10 | Steel for General Structure | Trivalent Chromate | 2 | 35 | Standard Thread {PT, M (Coarse) Thread} | For hydraulic / Water Pressure | 1 ～ 2 | ||
- | 1 | 9 Days | 10 | Steel for General Structure | Trivalent Chromate | 2 | 40 | Standard Thread {PT, M (Coarse) Thread} | For hydraulic / Water Pressure | 2 ～ 3 | ||
- | 1 | 9 Days | 10 | Steel for General Structure | Trivalent Chromate | 2 | 50 | Standard Thread {PT, M (Coarse) Thread} | For hydraulic / Water Pressure | 2 ～ 4 | ||
- | 1 | 9 Days | 10 | Steel for General Structure | Trivalent Chromate | 3 | 30 | Standard Thread {PT, M (Coarse) Thread} | For hydraulic / Water Pressure | 1 ～ 2 | ||
- | 1 | 9 Days | 10 | Steel for General Structure | Trivalent Chromate | 3 | 35 | Standard Thread {PT, M (Coarse) Thread} | For hydraulic / Water Pressure | 1 ～ 2 | ||
- | 1 | 9 Days | 10 | Steel for General Structure | Trivalent Chromate | 3 | 40 | Standard Thread {PT, M (Coarse) Thread} | For hydraulic / Water Pressure | 2 ～ 3 | ||
- | 1 | 9 Days | 10 | Steel for General Structure | Trivalent Chromate | 3 | 50 | Standard Thread {PT, M (Coarse) Thread} | For hydraulic / Water Pressure | 2 ～ 4 | ||
- | 1 | 9 Days | 10 | Steel for General Structure | Trivalent Chromate | 4 | 30 | Standard Thread {PT, M (Coarse) Thread} | For hydraulic / Water Pressure | 1 ～ 2 | ||
- | 1 | 9 Days | 10 | Steel for General Structure | Trivalent Chromate | 4 | 35 | Standard Thread {PT, M (Coarse) Thread} | For hydraulic / Water Pressure | 1 ～ 2 | ||
- | 1 | 9 Days | 10 | Steel for General Structure | Trivalent Chromate | 4 | 40 | Standard Thread {PT, M (Coarse) Thread} | For hydraulic / Water Pressure | 2 ～ 3 | ||
- | 1 | 9 Days | 10 | Steel for General Structure | Trivalent Chromate | 4 | 50 | Standard Thread {PT, M (Coarse) Thread} | For hydraulic / Water Pressure | 2 ～ 4 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 2 | 25 | G (PF) Thread | Pneumatic | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 2 | 30 | G (PF) Thread | Pneumatic | 1 ～ 2 | ||
- | 1 | 9 Days | 10 | EN AW-5052 Equiv. | Not Provided | 2 | 35 | G (PF) Thread | Pneumatic | 1 ～ 2 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 2 | 40 | G (PF) Thread | Pneumatic | 2 ～ 3 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 2 | 50 | G (PF) Thread | Pneumatic | 2 ～ 4 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 3 | 25 | G (PF) Thread | Pneumatic | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 3 | 30 | G (PF) Thread | Pneumatic | 1 ～ 2 | ||
- | 1 | 9 Days | 10 | EN AW-5052 Equiv. | Not Provided | 3 | 35 | G (PF) Thread | Pneumatic | 1 ～ 2 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 3 | 40 | G (PF) Thread | Pneumatic | 2 ～ 3 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 3 | 50 | G (PF) Thread | Pneumatic | 2 ～ 4 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 4 | 25 | G (PF) Thread | Pneumatic | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 4 | 30 | G (PF) Thread | Pneumatic | 1 ～ 2 | ||
- | 1 | 9 Days | 10 | EN AW-5052 Equiv. | Not Provided | 4 | 35 | G (PF) Thread | Pneumatic | 1 ～ 2 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 4 | 40 | G (PF) Thread | Pneumatic | 2 ～ 3 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Not Provided | 4 | 50 | G (PF) Thread | Pneumatic | 2 ～ 4 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 2 | 25 | G (PF) Thread | Pneumatic | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 2 | 30 | G (PF) Thread | Pneumatic | 1 ～ 2 | ||
- | 1 | 9 Days | 10 | EN AW-5052 Equiv. | Clear Anodized Aluminum | 2 | 35 | G (PF) Thread | Pneumatic | 1 ～ 2 |
Loading...
Basic information
| Shape | Lateral Through Hole, T-Shaped Hole | Pitch Standard / Configurable | Fixed Type |
|---|
Configure
Basic Attributes
-
Material
- EN AW-5052 Equiv.
- Steel for General Structure
-
Surface Treatment
- Not Provided
- Trivalent Chromate
- Clear Anodized Aluminum
-
Number of Circuits(Circuits)
- 2
- 3
- 4
-
Block Square A(mm)
- 25
- 30
- 35
- 40
- 50
- 60
-
Thread Size / Type
-
Application
- For hydraulic / Water Pressure
- Pneumatic
-
Standard Thread Dia. Selection 1 (1/8) 2 (1/4) 3 (3/8) 4 (1/2) 5 (M5) 6 (3/4)
-
Type
- BMFRA
- BMFRAA
- BMFRS
- G-BMFRA
- G-BMFRAA
- G-BMFRS
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 9 Days or Less
- 10 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Fitting for Hydraulic Pressure / Water Pressure, Long Straight Type, Male Thread for Both PT / PF, -Long Straight / Female-
MISUMI Standard Price : 12.72 € Shipping Days: 5 Days
-
Hydraulic Fittings / 90 Deg. Elbow / PT Threaded / PF Tapped
MISUMI Standard Price : 7.45 € Shipping Days: 5 Days
-
Swivel Joints / Straight / 90 Deg. Elbow / PT Threaded / PT / PF Tapped / Threaded
MISUMI Standard Price : 31.79 € Shipping Days: 5 Days
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.