Contact Probes Assembly / Threaded (MNP50)

MNP50

[ ! ] No soldering is required as round crimp terminals and lead wires are tucked in the threads and secured with nuts.
[ ! ] The matching end also strokes according to the stroke of the contact component.

No.	Part	[M] Material	[S] Surface Treatment
①	Plunger	ISO−TC90 Equiv.	Gold Plating on Nickel Undercoat
②	Spring	Spring Steel (JIS−SWP)	Gold Plating
③	Sleeve	Copper Alloy	Gold Plating on Nickel Undercoat
④	Collar	Copper Alloy	Nickel Plating
⑤	Nut (SKNTR3)	Stainless Steel	―

[ ! ] Accessories: Nut (2 pcs.)
[ ! ] Avoid tightening the nut at the torque exceeding the value of 0.98 N/m.

Part Number	Tip Shape	Minimum mounting pitch＊	Full Stroke	Spring Pressure		Allowable Current	Resistance	Replacement Cycle	Mounting Hole for Press Fitting Dimension (Reference)
				Initial	2/3 Stroke
MNP50	A・B・C G・G8・J	7.0mm〈9.0mm〉	7.6mm	228gf	455gf	5A	35mΩ	300,000 times	4.18〜4.2mm

* Minimum center-to-center spacing between adjacent contact probes.
[ ! ] To fit it, press in the sleeve (3).
[ ! ] MNP50 mounting pitches in < > are applicable to G8 tip shape.