Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Material | Surface Treatment | Hardness | Type | ||
Threaded | Tapped | Pilot | |||
EN 1.1191 Equiv. | Black Oxide | - | SRPCB | SRPAB | SRPBB |
EN 1.1191 Equiv. | Hard Chrome Plating | Plating Hardness: 750HV ~ | SRPCR | SRPAR | - |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | SRPCHB | SRPAHB | SRPBHB |
EN 1.1191 Equiv. | Hard Chrome Plating | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | SRPCHR | SRPAHR | SRPBHR |
EN 1.4037 Equiv. | - | Treated Hardness: 50 ~ 55HRC | SRPCC | SRPAC | SRPBC |
Part Number | - | L | - | P | - | F | - | G | ||
Type | B | |||||||||
SRPCB SRPAHB | 10 14 | - - | L50.00 L70.02 | - - | P5.98 P6.00 | - - | F3.0 F5.0 | - | G5 |
M (Coarse) | Tightening Torque N • cm |
M3 | 98 |
M4 | 225 |
M5 | 461 |
M6 | 784 |
M8 | 1911 |
M10 | 3783 |
M12 | 6605 |
M16 | 16366 |
M20 | 32928 |
Part Number | L 0.01mm Increment | P 0.01mm Increment | F 0.1mm Increment | G 1mm Increment | m | (C) | d | M (Coarse) | M1 (Coarse) | ℓ1 | d1 | |||
Type | B | |||||||||||||
Threaded only | ||||||||||||||
Threaded SRPCB SRPCR SRPCHB SRPCHR SRPCC | Tapped SRPAB SRPAR SRPAHB SRPAHR SRPAC | Pilot SRPBB SRPBHB SRPBHR SRPBC | 6 | 10.00~50.00 | 3.00~4.00 | 2.0~12.0 | 0 or 2≤G≤dx2 | 1 | 6.9 | 4 | M4 | M3 | - | - |
7 | 3.00~6.00 | 2.0~15.0 | 8.1 | |||||||||||
8 | 15.00~50.00 | 9.2 | 5 | M5 | M4 | |||||||||
10 | 20.00~80.00 | 4.00~8.00 | 2.0~20.0 | 2 | 11.5 | M5 | 6 | 8 | ||||||
12 | 4.00~10.00 | 13.9 | 6 | M6 | 10 | |||||||||
13 | 5.00~10.00 | 2.0~25.0 | 3 | 15 | M6 | 8 | ||||||||
14 | 16.2 | |||||||||||||
17 | 8.00~15.00 | 2.0~30.0 | 19.6 | 8 | M8 | 9 | 12 | |||||||
19 | 21.9 | M8 | ||||||||||||
24 | 10.00~15.00 | 4 | 27.7 | 10 | M10 | 10 | 16 |
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
SRPAC8-L[15-50/0.01]-P[3-6/0.01]-F[2-15/0.1] |
SRPAC10-L[20-80/0.01]-P[4-8/0.01]-F[2-20/0.1] |
SRPAC12-L[20-80/0.01]-P[4-10/0.01]-F[2-20/0.1] |
SRPAC13-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1] |
SRPAC14-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1] |
SRPAC17-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1] |
SRPAC19-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1] |
SRPAC24-L[20-80/0.01]-P[10-15/0.01]-F[2-30/0.1] |
SRPBC10-L[20-80/0.01]-P[4-8/0.01]-F[2-20/0.1] |
SRPBC12-L[20-80/0.01]-P[4-10/0.01]-F[2-20/0.1] |
SRPBC13-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1] |
SRPBC14-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1] |
SRPBC17-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1] |
SRPBC19-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1] |
SRPBC24-L[20-80/0.01]-P[10-15/0.01]-F[2-30/0.1] |
SRPCC8-L[15-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G0 |
SRPCC8-L[15-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G[2-10/1] |
SRPCC10-L[20-80/0.01]-P[4-8/0.01]-F[2-20/0.1]-G0 |
SRPCC10-L[20-80/0.01]-P[4-8/0.01]-F[2-20/0.1]-G[2-10/1] |
SRPCC12-L[20-80/0.01]-P[4-10/0.01]-F[2-20/0.1]-G0 |
SRPCC12-L[20-80/0.01]-P[4-10/0.01]-F[2-20/0.1]-G[2-12/1] |
SRPCC13-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G0 |
SRPCC13-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G[2-12/1] |
SRPCC14-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G0 |
SRPCC14-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G[2-12/1] |
SRPCC17-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]-G0 |
SRPCC17-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]-G[2-16/1] |
SRPCC19-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]-G0 |
SRPCC19-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]-G[2-16/1] |
SRPCC24-L[20-80/0.01]-P[10-15/0.01]-F[2-30/0.1]-G0 |
SRPCC24-L[20-80/0.01]-P[10-15/0.01]-F[2-30/0.1]-G[2-20/1] |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Mounting Method | Material | Surface Treatment (Ø) | Heat Treatment | Hardness | Wrench Flats B (mm) | F (mm) | G (mm) | L (mm) | P (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 Days | 10 | Tapped | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 8 | 2 ~ 15 | - | 15 ~ 50 | 3 ~ 6 | ||
- | 1 | 8 Days | 10 | Tapped | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 10 | 2 ~ 20 | - | 20 ~ 80 | 4 ~ 8 | ||
- | 1 | 8 Days | 10 | Tapped | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 12 | 2 ~ 20 | - | 20 ~ 80 | 4 ~ 10 | ||
- | 1 | 8 Days | 10 | Tapped | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 13 | 2 ~ 25 | - | 20 ~ 80 | 5 ~ 10 | ||
- | 1 | 8 Days | 10 | Tapped | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 14 | 2 ~ 25 | - | 20 ~ 80 | 5 ~ 10 | ||
- | 1 | 8 Days | 10 | Tapped | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 17 | 2 ~ 30 | - | 20 ~ 80 | 8 ~ 15 | ||
- | 1 | 8 Days | 10 | Tapped | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 19 | 2 ~ 30 | - | 20 ~ 80 | 8 ~ 15 | ||
- | 1 | 8 Days | 10 | Tapped | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 24 | 2 ~ 30 | - | 20 ~ 80 | 10 ~ 15 | ||
- | 1 | 8 Days | 10 | With Pilot / Tapped | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 10 | 2 ~ 20 | - | 20 ~ 80 | 4 ~ 8 | ||
- | 1 | 8 Days | 10 | With Pilot / Tapped | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 12 | 2 ~ 20 | - | 20 ~ 80 | 4 ~ 10 | ||
- | 1 | 8 Days | 10 | With Pilot / Tapped | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 13 | 2 ~ 25 | - | 20 ~ 80 | 5 ~ 10 | ||
- | 1 | 8 Days | 10 | With Pilot / Tapped | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 14 | 2 ~ 25 | - | 20 ~ 80 | 5 ~ 10 | ||
- | 1 | 8 Days | 10 | With Pilot / Tapped | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 17 | 2 ~ 30 | - | 20 ~ 80 | 8 ~ 15 | ||
- | 1 | 8 Days | 10 | With Pilot / Tapped | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 19 | 2 ~ 30 | - | 20 ~ 80 | 8 ~ 15 | ||
- | 1 | 8 Days | 10 | With Pilot / Tapped | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 24 | 2 ~ 30 | - | 20 ~ 80 | 10 ~ 15 | ||
- | 1 | 8 Days | 10 | Threads | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 8 | 2 ~ 15 | 0 | 15 ~ 50 | 3 ~ 6 | ||
- | 1 | 8 Days | 10 | Threads | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 8 | 2 ~ 15 | 2 ~ 10 | 15 ~ 50 | 3 ~ 6 | ||
- | 1 | 8 Days | 10 | Threads | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 10 | 2 ~ 20 | 0 | 20 ~ 80 | 4 ~ 8 | ||
- | 1 | 8 Days | 10 | Threads | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 10 | 2 ~ 20 | 2 ~ 10 | 20 ~ 80 | 4 ~ 8 | ||
- | 1 | 8 Days | 10 | Threads | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 12 | 2 ~ 20 | 0 | 20 ~ 80 | 4 ~ 10 | ||
- | 1 | 8 Days | 10 | Threads | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 12 | 2 ~ 20 | 2 ~ 12 | 20 ~ 80 | 4 ~ 10 | ||
- | 1 | 8 Days | 10 | Threads | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 13 | 2 ~ 25 | 0 | 20 ~ 80 | 5 ~ 10 | ||
- | 1 | 8 Days | 10 | Threads | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 13 | 2 ~ 25 | 2 ~ 12 | 20 ~ 80 | 5 ~ 10 | ||
- | 1 | 8 Days | 10 | Threads | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 14 | 2 ~ 25 | 0 | 20 ~ 80 | 5 ~ 10 | ||
- | 1 | 8 Days | 10 | Threads | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 14 | 2 ~ 25 | 2 ~ 12 | 20 ~ 80 | 5 ~ 10 | ||
- | 1 | 8 Days | 10 | Threads | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 17 | 2 ~ 30 | 0 | 20 ~ 80 | 8 ~ 15 | ||
- | 1 | 8 Days | 10 | Threads | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 17 | 2 ~ 30 | 2 ~ 16 | 20 ~ 80 | 8 ~ 15 | ||
- | 1 | 8 Days | 10 | Threads | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 19 | 2 ~ 30 | 0 | 20 ~ 80 | 8 ~ 15 | ||
- | 1 | 8 Days | 10 | Threads | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 19 | 2 ~ 30 | 2 ~ 16 | 20 ~ 80 | 8 ~ 15 | ||
- | 1 | 8 Days | 10 | Threads | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 24 | 2 ~ 30 | 0 | 20 ~ 80 | 10 ~ 15 | ||
- | 1 | 8 Days | 10 | Threads | Stainless Steel | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 24 | 2 ~ 30 | 2 ~ 20 | 20 ~ 80 | 10 ~ 15 |
Loading...
Shape | Support Pins | Height Tolerance | 0/+0.05 | Tip Shape | Spherical |
---|
Configure
Basic Attributes
Mounting Method
Surface Treatment(Ø)
Heat Treatment
Hardness
Wrench Flats B(mm)
F(mm)
G(mm)
L(mm)
P(mm)
Type
Material
Filter by CAD data type
Filter by standard shipping days
Optional Attributes