- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
Rack gears / induction hardened / ground / contact angle 20 degrees modules 1.0 / 1.5 / 2.0 / 2.5 / 3.0
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Type | Material | Surface Treatment | Hardness |
| RGEAH | EN 1.1191 Equiv. | Black Oxide | Tooth Induction Hardened 45~55HRC |
Specifications
| Part Number | - | Nominal | - | Hole Machining |
| RGEAH1.0 | - | 500 | - | A |
| Part Number | Nominal | Hole Machining | Number of Effective Teeth | L | P (Pitch) | W | H | h | B (Hole Pitch) | M (Coarse) | d1 | d2 | Z1 | K (Number of Holes) | |
| Type | Module | ||||||||||||||
| RGEAH | 1.0 | 300 | N (No Hole Machining) A (Bottom Tapped) ST (Side Tapped) Z (Side Counterbored) | 95 | 298.45 | 3.142 | 10 | 12 | 11 | 180 | M3 | 3.5 | 6.5 | 3.5 | 2 |
| 500 | 159 | 499.51 | 3 | ||||||||||||
| 1.5 | 300 | 63 | 296.85 | 4.712 | 15 | 20 | 18.5 | 180 | M4 | 4.5 | 8 | 4.5 | 2 | ||
| 500 | 106 | 499.51 | 3 | ||||||||||||
| 2.0 | 500 | 79 | 496.37 | 6.283 | 20 | 25 | 23 | 180 | M5 | 5.5 | 9.5 | 5.5 | 3 | ||
| 2.5 | 500 | 63 | 494.8 | 7.854 | 25 | 30 | 27.5 | 180 | M5 | 5.5 | 9.5 | 5.5 | 3 | ||
| 3.0 | 500 | 53 | 499.51 | 9.424 | 30 | 35 | 32 | 180 | M5 | 5.5 | 9.5 | 5.5 | 3 | ||
Alterations
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| RGEAH1.0-300-A |
| RGEAH1.0-300-N |
| RGEAH1.0-300-N-MC3 |
| RGEAH1.0-300-N-WMC3 |
| RGEAH1.0-300-ST |
| RGEAH1.0-300-Z |
| RGEAH1.0-500-A |
| RGEAH1.0-500-N |
| RGEAH1.0-500-N-MC4 |
| RGEAH1.0-500-N-WMC6 |
| RGEAH1.0-500-ST |
| RGEAH1.0-500-Z |
| RGEAH1.5-300-A |
| RGEAH1.5-300-N |
| RGEAH1.5-300-N-MC6 |
| RGEAH1.5-300-N-WMC6 |
| RGEAH1.5-300-ST |
| RGEAH1.5-300-Z |
| RGEAH1.5-500-A |
| RGEAH1.5-500-N |
| RGEAH1.5-500-N-MC5 |
| RGEAH1.5-500-N-WMC4 |
| RGEAH1.5-500-ST |
| RGEAH1.5-500-Z |
| RGEAH2.0-500-A |
| RGEAH2.0-500-N |
| RGEAH2.0-500-N-MC6 |
| RGEAH2.0-500-N-WMC6 |
| RGEAH2.0-500-ST |
| RGEAH2.0-500-Z |
| RGEAH2.5-500-A |
| RGEAH2.5-500-N |
| RGEAH2.5-500-N-MC |
| RGEAH2.5-500-N-WMC |
| RGEAH2.5-500-ST |
| RGEAH2.5-500-Z |
| RGEAH3.0-500-A |
| RGEAH3.0-500-N |
| RGEAH3.0-500-N-MC6 |
| RGEAH3.0-500-N-WMC6 |
| RGEAH3.0-500-ST |
| RGEAH3.0-500-Z |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Module (M) / Circular Pitch (P) | Length L (mm) | Number of Effective Teeth (teeth) | Tooth Width W (or D) (mm) | Rack Height (mm) | Hole Machining | Tapping Alteration on End | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
84.02 € | 1 | 7 Days | 10 | 1 | 298.45 | 95 | 10 | 12 | A (Back Tapped) | No Alteration | ||
73.09 € | 1 | 5 Days | 10 | 1 | 298.45 | 95 | 10 | 12 | N (No Hole machining) | No Alteration | ||
78.01 € | 1 | 7 Days | 10 | 1 | 298.45 | 95 | 10 | 12 | N (No Hole machining) | mC (One End Tapped) | ||
82.91 € | 1 | 7 Days | 10 | 1 | 298.45 | 95 | 10 | 12 | N (No Hole machining) | WmC (Both Ends Tapped) | ||
84.02 € | 1 | 7 Days | 10 | 1 | 298.45 | 95 | 10 | 12 | ST (Side Tapped) | No Alteration | ||
89.54 € | 1 | 7 Days | 10 | 1 | 298.45 | 95 | 10 | 12 | Z (Side Counterbored) | No Alteration | ||
123.21 € | 1 | 7 Days | 10 | 1 | 499.51 | 159 | 10 | 12 | A (Back Tapped) | No Alteration | ||
111.78 € | 1 | 5 Days | 10 | 1 | 499.51 | 159 | 10 | 12 | N (No Hole machining) | No Alteration | ||
116.70 € | 1 | 7 Days | 10 | 1 | 499.51 | 159 | 10 | 12 | N (No Hole machining) | mC (One End Tapped) | ||
121.62 € | 1 | 7 Days | 10 | 1 | 499.51 | 159 | 10 | 12 | N (No Hole machining) | WmC (Both Ends Tapped) | ||
123.21 € | 1 | 7 Days | 10 | 1 | 499.51 | 159 | 10 | 12 | ST (Side Tapped) | No Alteration | ||
128.98 € | 1 | 7 Days | 10 | 1 | 499.51 | 159 | 10 | 12 | Z (Side Counterbored) | No Alteration | ||
97.42 € | 1 | 7 Days | 10 | 1.5 | 296.85 | 63 | 15 | 20 | A (Back Tapped) | No Alteration | ||
85.99 € | 1 | 5 Days | 10 | 1.5 | 296.85 | 63 | 15 | 20 | N (No Hole machining) | No Alteration | ||
90.90 € | 1 | 7 Days | 10 | 1.5 | 296.85 | 63 | 15 | 20 | N (No Hole machining) | mC (One End Tapped) | ||
95.81 € | 1 | 7 Days | 10 | 1.5 | 296.85 | 63 | 15 | 20 | N (No Hole machining) | WmC (Both Ends Tapped) | ||
97.42 € | 1 | 7 Days | 10 | 1.5 | 296.85 | 63 | 15 | 20 | ST (Side Tapped) | No Alteration | ||
103.18 € | 1 | 7 Days | 10 | 1.5 | 296.85 | 63 | 15 | 20 | Z (Side Counterbored) | No Alteration | ||
149.37 € | 1 | 7 Days | 10 | 1.5 | 499.51 | 106 | 15 | 20 | A (Back Tapped) | No Alteration | ||
137.58 € | 1 | 5 Days | 10 | 1.5 | 499.51 | 106 | 15 | 20 | N (No Hole machining) | No Alteration | ||
142.50 € | 1 | 7 Days | 10 | 1.5 | 499.51 | 106 | 15 | 20 | N (No Hole machining) | mC (One End Tapped) | ||
147.41 € | 1 | 7 Days | 10 | 1.5 | 499.51 | 106 | 15 | 20 | N (No Hole machining) | WmC (Both Ends Tapped) | ||
149.37 € | 1 | 7 Days | 10 | 1.5 | 499.51 | 106 | 15 | 20 | ST (Side Tapped) | No Alteration | ||
155.52 € | 1 | 7 Days | 10 | 1.5 | 499.51 | 106 | 15 | 20 | Z (Side Counterbored) | No Alteration | ||
168.05 € | 1 | 7 Days | 10 | 2 | 496.37 | 79 | 20 | 25 | A (Back Tapped) | No Alteration | ||
154.79 € | 1 | 5 Days | 10 | 2 | 496.37 | 79 | 20 | 25 | N (No Hole machining) | No Alteration | ||
159.69 € | 1 | 7 Days | 10 | 2 | 496.37 | 79 | 20 | 25 | N (No Hole machining) | mC (One End Tapped) | ||
164.60 € | 1 | 7 Days | 10 | 2 | 496.37 | 79 | 20 | 25 | N (No Hole machining) | WmC (Both Ends Tapped) | ||
168.05 € | 1 | 7 Days | 10 | 2 | 496.37 | 79 | 20 | 25 | ST (Side Tapped) | No Alteration | ||
175.42 € | 1 | 7 Days | 10 | 2 | 496.37 | 79 | 20 | 25 | Z (Side Counterbored) | No Alteration | ||
176.64 € | 1 | 7 Days | 10 | 2.5 | 494.8 | 63 | 25 | 30 | A (Back Tapped) | No Alteration | ||
163.38 € | 1 |
Same day
Stock | 10 | 2.5 | 494.8 | 63 | 25 | 30 | N (No Hole machining) | No Alteration | ||
168.29 € | 1 | 7 Days | 10 | 2.5 | 494.8 | 63 | 25 | 30 | N (No Hole machining) | mC (One End Tapped) | ||
173.20 € | 1 | 7 Days | 10 | 2.5 | 494.8 | 63 | 25 | 30 | N (No Hole machining) | WmC (Both Ends Tapped) | ||
176.64 € | 1 | 7 Days | 10 | 2.5 | 494.8 | 63 | 25 | 30 | ST (Side Tapped) | No Alteration | ||
184.02 € | 1 | 7 Days | 10 | 2.5 | 494.8 | 63 | 25 | 30 | Z (Side Counterbored) | No Alteration | ||
195.07 € | 1 | 7 Days | 10 | 3 | 499.51 | 53 | 30 | 35 | A (Back Tapped) | No Alteration | ||
181.80 € | 1 | 5 Days | 10 | 3 | 499.51 | 53 | 30 | 35 | N (No Hole machining) | No Alteration | ||
202.69 € | 1 | 7 Days | 10 | 3 | 499.51 | 53 | 30 | 35 | N (No Hole machining) | mC (One End Tapped) | ||
207.61 € | 1 | 7 Days | 10 | 3 | 499.51 | 53 | 30 | 35 | N (No Hole machining) | WmC (Both Ends Tapped) | ||
195.07 € | 1 | 7 Days | 10 | 3 | 499.51 | 53 | 30 | 35 | ST (Side Tapped) | No Alteration | ||
202.44 € | 1 | 7 Days | 10 | 3 | 499.51 | 53 | 30 | 35 | Z (Side Counterbored) | No Alteration |
Loading...
More Information
Basic information
| Tooth Type | Standard | Shape | Rack Gears | Heat Treatment | High Frequency |
|---|---|---|---|---|---|
| Ground Tooth | Provided | Surface Treatment | Black Oxide | End Face Machining | Both Ends Machined Type |
Configure
Stock
-
- Show only stock items
Basic Attributes
-
Module (M) / Circular Pitch (P)
-
Length L(mm)
-
Number of Effective Teeth(teeth)
-
Tooth Width W (or D)(mm)
-
Hole Machining
- A (Back Tapped)
- N (No Hole machining)
- ST (Side Tapped)
- Z (Side Counterbored)
-
Tapping Alteration on End
- No Alteration
- WmC (Both Ends Tapped)
- mC (One End Tapped)
-
Type
- RGEAH
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- Same day
- 5 Days or Less
- 7 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Spur gears / tooth width / hub dimension configurable / contact angle 20 degrees
MISUMI Shipping Days: 8 Days
MISUMI Unit еxample related to this product
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.