• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Support Pins / Tip Shape Selectable

Support Pins / Tip Shape Selectable

MISUMI

MISUMI

Data sheet

Unit еxample related to this product
Surface inspection fixture
Search for оther еxamples

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Support Pins/Tip Shape Selectable:Related Image
 
MaterialSurface TreatmentHardnessThreadedTappedPilot
EN 1.1191 Equiv.Black Oxide-LSPCLSPALSPB
EN 1.1191 Equiv.Hard Chrome PlatingPlating Hardness: 750HV ~LSPRCLSPARLSPBR
EN 1.1191 Equiv.Black OxideTreated Hardness: 45 ~ 50HRCLSPHBCLSPAHBLSPBHB
EN 1.1191 Equiv.Hard Chrome PlatingTreated Hardness: 45 ~ 50HRC
Plating Hardness: 750HV ~		LSPHRCLSPAHRLSPBHR
EN 1.4301 Equiv.--LSPSUCLSPASULSPBSU
EN 1.4037 Equiv.-Treated Hardness: 50 ~ 55HRCLSPSCCLSPASCLSPBSC
EN 1.4301 Equiv. may not be polished and may have no centering hole.  

Specifications

Part Number-L-P-B-E-A
LSPCA10-L20.01-P4.05-B5-E2.0-A15
LSPBC12-L25.01-P8.00-B10    
Support Pins/Tip Shape Selectable:Related Image Tapped, Threaded
Recommended Tightening Torque (Reference)
M (Coarse)Tightening Torque
N • cm
M3   98
M4  225
M5  461
M6  784
M8 1911
M10 3783
M12 6605
M1616366
M2032928
The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >> P. 2297.) Not applicable when using locking materials or lock washers.
 
Part NumberL
0.01mm Increment		P
0.01mm Increment		B
0.1mm Increment		E
0.1mm Increment (Shape A only)		A Selection (Shape A only)R
(Shape C)		dM (Coarse)FM1 (Coarse)ℓ1Wℓ2
TypeTip ShapeD
Threaded
LSPC
LSPRC
LSPHBC
LSPHRC
LSPSUC
LSPSCC		Tapped
LSPA
LSPAR
LSPAHB
LSPAHR
LSPASU
LSPASC		Pilot
LSPB
LSPBR
LSPBHB
LSPBHR
LSPBSU
LSPBSC		A
B
C		610.00~50.003.00~4.002.0~12.00.5~10.015
30
45
60		1331.5M3-58
83.00~6.002.0~15.05527
1020.00~80.004.00~8.002.0~20.01.566368
124.00~10.002.0~20.0884M51010
155.00~10.002.0~25.0210105913
208.00~15.002.0~30.0312125M817
2510.00~15.002.0~30.041616520
For Pilot Type, D dimension 10 or more is available. Note the strength of undercut part for Tapped and Pilot.>> P.1566

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
LSPASCA6-L[10-50/0.01]-P[3-4/0.01]-B[2-12/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPASCA8-L[10-50/0.01]-P[3-6/0.01]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPASCA10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPASCA12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPASCA15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPASCA20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPASCA25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPASCB6-L[10-50/0.01]-P[3-4/0.01]-B[2-12/0.1]
LSPASCB8-L[10-50/0.01]-P[3-6/0.01]-B[2-15/0.1]
LSPASCB10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPASCB12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPASCB15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPASCB20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPASCB25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPASCC6-L[10-50/0.01]-P[3-4/0.01]-B[2-12/0.1]
LSPASCC8-L[10-50/0.01]-P[3-6/0.01]-B[2-15/0.1]
LSPASCC10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPASCC12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPASCC15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPASCC20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPASCC25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPASUA6-L[10-50/0.01]-P[3-4/0.01]-B[2-12/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPASUA8-L[10-50/0.01]-P[3-6/0.01]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPASUA10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPASUA12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPASUA15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPASUA20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPASUA25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPASUB6-L[10-50/0.01]-P[3-4/0.01]-B[2-12/0.1]
LSPASUB8-L[10-50/0.01]-P[3-6/0.01]-B[2-15/0.1]
LSPASUB10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPASUB12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPASUB15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPASUB20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPASUB25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPASUC6-L[10-50/0.01]-P[3-4/0.01]-B[2-12/0.1]
LSPASUC8-L[10-50/0.01]-P[3-6/0.01]-B[2-15/0.1]
LSPASUC10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPASUC12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPASUC15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPASUC20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPASUC25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPBSCA10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBSCA12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBSCA15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBSCA20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBSCA25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBSCB10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPBSCB12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPBSCB15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPBSCB20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPBSCB25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPBSCC10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPBSCC12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPBSCC15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPBSCC20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPBSCC25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPBSUA10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBSUA12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPBSUA15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMounting Method Tip Shape Material Surface Treatment
(Ø) 		Heat Treatment Hardness O.D. D
(mm) 		A B
(mm) 		E
(mm) 		L
(mm) 		P
(mm)

-

1 8 Days 10TappedFlatStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC615 ～ 602 ～ 120.5 ～ 1010 ～ 503 ～ 4

-

1 8 Days 10TappedFlatStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC815 ～ 602 ～ 150.5 ～ 1010 ～ 503 ～ 6

-

1 8 Days 10TappedFlatStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC1015 ～ 602 ～ 200.5 ～ 1020 ～ 804 ～ 8

-

1 8 Days 10TappedFlatStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC1215 ～ 602 ～ 200.5 ～ 1020 ～ 804 ～ 10

-

1 8 Days 10TappedFlatStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC1515 ～ 602 ～ 250.5 ～ 1020 ～ 805 ～ 10

-

1 8 Days 10TappedFlatStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC2015 ～ 602 ～ 300.5 ～ 1020 ～ 808 ～ 15

-

1 8 Days 10TappedFlatStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC2515 ～ 602 ～ 300.5 ～ 1020 ～ 8010 ～ 15

-

1 8 Days 10TappedSphericalStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC6-2 ～ 12-10 ～ 503 ～ 4

-

1 8 Days 10TappedSphericalStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC8-2 ～ 15-10 ～ 503 ～ 6

-

1 8 Days 10TappedSphericalStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC10-2 ～ 20-20 ～ 804 ～ 8

-

1 8 Days 10TappedSphericalStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC12-2 ～ 20-20 ～ 804 ～ 10

-

1 8 Days 10TappedSphericalStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC15-2 ～ 25-20 ～ 805 ～ 10

-

1 8 Days 10TappedSphericalStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC20-2 ～ 30-20 ～ 808 ～ 15

-

1 8 Days 10TappedSphericalStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC25-2 ～ 30-20 ～ 8010 ～ 15

-

1 8 Days 10TappedBullet NoseStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC6-2 ～ 12-10 ～ 503 ～ 4

-

1 8 Days 10TappedBullet NoseStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC8-2 ～ 15-10 ～ 503 ～ 6

-

1 8 Days 10TappedBullet NoseStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC10-2 ～ 20-20 ～ 804 ～ 8

-

1 8 Days 10TappedBullet NoseStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC12-2 ～ 20-20 ～ 804 ～ 10

-

1 8 Days 10TappedBullet NoseStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC15-2 ～ 25-20 ～ 805 ～ 10

-

1 8 Days 10TappedBullet NoseStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC20-2 ～ 30-20 ～ 808 ～ 15

-

1 8 Days 10TappedBullet NoseStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC25-2 ～ 30-20 ～ 8010 ～ 15

-

1 8 Days 10TappedFlatStainless SteelNot ProvidedNot ProvidedNot Provided615 ～ 602 ～ 120.5 ～ 1010 ～ 503 ～ 4

-

1 8 Days 10TappedFlatStainless SteelNot ProvidedNot ProvidedNot Provided815 ～ 602 ～ 150.5 ～ 1010 ～ 503 ～ 6

-

1 8 Days 10TappedFlatStainless SteelNot ProvidedNot ProvidedNot Provided1015 ～ 602 ～ 200.5 ～ 1020 ～ 804 ～ 8

-

1 8 Days 10TappedFlatStainless SteelNot ProvidedNot ProvidedNot Provided1215 ～ 602 ～ 200.5 ～ 1020 ～ 804 ～ 10

-

1 8 Days 10TappedFlatStainless SteelNot ProvidedNot ProvidedNot Provided1515 ～ 602 ～ 250.5 ～ 1020 ～ 805 ～ 10

-

1 8 Days 10TappedFlatStainless SteelNot ProvidedNot ProvidedNot Provided2015 ～ 602 ～ 300.5 ～ 1020 ～ 808 ～ 15

-

1 8 Days 10TappedFlatStainless SteelNot ProvidedNot ProvidedNot Provided2515 ～ 602 ～ 300.5 ～ 1020 ～ 8010 ～ 15

-

1 8 Days 10TappedSphericalStainless SteelNot ProvidedNot ProvidedNot Provided6-2 ～ 12-10 ～ 503 ～ 4

-

1 8 Days 10TappedSphericalStainless SteelNot ProvidedNot ProvidedNot Provided8-2 ～ 15-10 ～ 503 ～ 6

-

1 8 Days 10TappedSphericalStainless SteelNot ProvidedNot ProvidedNot Provided10-2 ～ 20-20 ～ 804 ～ 8

-

1 8 Days 10TappedSphericalStainless SteelNot ProvidedNot ProvidedNot Provided12-2 ～ 20-20 ～ 804 ～ 10

-

1 8 Days 10TappedSphericalStainless SteelNot ProvidedNot ProvidedNot Provided15-2 ～ 25-20 ～ 805 ～ 10

-

1 8 Days 10TappedSphericalStainless SteelNot ProvidedNot ProvidedNot Provided20-2 ～ 30-20 ～ 808 ～ 15

-

1 8 Days 10TappedSphericalStainless SteelNot ProvidedNot ProvidedNot Provided25-2 ～ 30-20 ～ 8010 ～ 15

-

1 8 Days 10TappedBullet NoseStainless SteelNot ProvidedNot ProvidedNot Provided6-2 ～ 12-10 ～ 503 ～ 4

-

1 8 Days 10TappedBullet NoseStainless SteelNot ProvidedNot ProvidedNot Provided8-2 ～ 15-10 ～ 503 ～ 6

-

1 8 Days 10TappedBullet NoseStainless SteelNot ProvidedNot ProvidedNot Provided10-2 ～ 20-20 ～ 804 ～ 8

-

1 8 Days 10TappedBullet NoseStainless SteelNot ProvidedNot ProvidedNot Provided12-2 ～ 20-20 ～ 804 ～ 10

-

1 8 Days 10TappedBullet NoseStainless SteelNot ProvidedNot ProvidedNot Provided15-2 ～ 25-20 ～ 805 ～ 10

-

1 8 Days 10TappedBullet NoseStainless SteelNot ProvidedNot ProvidedNot Provided20-2 ～ 30-20 ～ 808 ～ 15

-

1 8 Days 10TappedBullet NoseStainless SteelNot ProvidedNot ProvidedNot Provided25-2 ～ 30-20 ～ 8010 ～ 15

-

1 8 Days 10With Pilot / TappedFlatStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC1015 ～ 602 ～ 200.5 ～ 1020 ～ 804 ～ 8

-

1 8 Days 10With Pilot / TappedFlatStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC1215 ～ 602 ～ 200.5 ～ 1020 ～ 804 ～ 10

-

1 8 Days 10With Pilot / TappedFlatStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC1515 ～ 602 ～ 250.5 ～ 1020 ～ 805 ～ 10

-

1 8 Days 10With Pilot / TappedFlatStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC2015 ～ 602 ～ 300.5 ～ 1020 ～ 808 ～ 15

-

1 8 Days 10With Pilot / TappedFlatStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC2515 ～ 602 ～ 300.5 ～ 1020 ～ 8010 ～ 15

-

1 8 Days 10With Pilot / TappedSphericalStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC10-2 ～ 20-20 ～ 804 ～ 8

-

1 8 Days 10With Pilot / TappedSphericalStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC12-2 ～ 20-20 ～ 804 ～ 10

-

1 8 Days 10With Pilot / TappedSphericalStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC15-2 ～ 25-20 ～ 805 ～ 10

-

1 8 Days 10With Pilot / TappedSphericalStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC20-2 ～ 30-20 ～ 808 ～ 15

-

1 8 Days 10With Pilot / TappedSphericalStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC25-2 ～ 30-20 ～ 8010 ～ 15

-

1 8 Days 10With Pilot / TappedBullet NoseStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC10-2 ～ 20-20 ～ 804 ～ 8

-

1 8 Days 10With Pilot / TappedBullet NoseStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC12-2 ～ 20-20 ～ 804 ～ 10

-

1 8 Days 10With Pilot / TappedBullet NoseStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC15-2 ～ 25-20 ～ 805 ～ 10

-

1 8 Days 10With Pilot / TappedBullet NoseStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC20-2 ～ 30-20 ～ 808 ～ 15

-

1 8 Days 10With Pilot / TappedBullet NoseStainless SteelNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC25-2 ～ 30-20 ～ 8010 ～ 15

-

1 8 Days 10With Pilot / TappedFlatStainless SteelNot ProvidedNot ProvidedNot Provided1015 ～ 602 ～ 200.5 ～ 1020 ～ 804 ～ 8

-

1 8 Days 10With Pilot / TappedFlatStainless SteelNot ProvidedNot ProvidedNot Provided1215 ～ 602 ～ 200.5 ～ 1020 ～ 804 ～ 10

-

1 8 Days 10With Pilot / TappedFlatStainless SteelNot ProvidedNot ProvidedNot Provided1515 ～ 602 ～ 250.5 ～ 1020 ～ 805 ～ 10

Loading...

  1. 1
  2. 2
  3. Next >>
 

Basic information

Shape Support Pins Height Tolerance 0/+0.05

Configure

Clear all

114Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Mounting Method

    • Tapped
    • Threads
    • With Pilot / Tapped

    Clear

  • Tip Shape

    • Flat
    • Spherical
    • Bullet Nose

    Clear

  • Surface Treatment(Ø)

    • Not Provided
    • Hard Chrome Plating
    • Black Oxide

    Clear

  • Heat Treatment

    • Provided
    • Not Provided

    Clear

  • Hardness

    • Treated Hardness: 45 ~ 50HRC
    • Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~
    • Treated Hardness: 50 ~ 55HRC
    • Plating Hardness: 750HV
    • Not Provided

    Clear

  • O.D. D(mm)

    • 6
    • 8
    • 10
    • 12
    • 15
    • 20
    • 25

    Clear

  • A

    • 15
    • 30
    • 45
    • 60

    Clear

  • B(mm)

     [2-30/0.1mm Unit(s)]

    Clear

  • E(mm)

     [0.5-10/0.1mm Unit(s)]

    Clear

  • L(mm)

     [10-80/0.01mm Unit(s)]

    Clear

  • P(mm)

     [3-15/0.01mm Unit(s)]

    Clear

  • Type

    • LSPAA
    • LSPAB
    • LSPAC
    • LSPAHBA
    • LSPAHBB
    • LSPAHBC
    • LSPAHRA
    • LSPAHRB
    • LSPAHRC
    • LSPARA
    • LSPARB
    • LSPARC
    • LSPASC□
    • LSPASUA
    • LSPASUB
    • LSPASUC
    • LSPBA
    • LSPBB
    • LSPBC
    • LSPBHBA
    • LSPBHBB
    • LSPBHBC
    • LSPBHRA
    • LSPBHRB
    • LSPBHRC
    • LSPBRA
    • LSPBRB
    • LSPBRC
    • LSPBSC□
    • LSPBSUA
    • LSPBSUB
    • LSPBSUC
    • LSPCA
    • LSPCB
    • LSPCC
    • LSPHBCA
    • LSPHBCB
    • LSPHBCC
    • LSPHRCA
    • LSPHRCB
    • LSPHRCC
    • LSPRCA
    • LSPRCB
    • LSPRCC
    • LSPSCC□
    • LSPSUCA
    • LSPSUCB
    • LSPSUCC

    Clear

  • Material

    • Steel
    • Stainless Steel

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 8 Days or Less

    Reset

Optional Attributes

Complementary Products

MISUMI Unit еxample related to this product

Search for оther еxamples

back next

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.