Manufacturer part number: SFJC12-120-M6-SC15
Brand: MISUMI
Price: Please contact the support for quotation
Delivery time: 4 Days
Shaft Dia. D: 12 mm
Length L: 120 mm
Material: [Iron] EN 1.3505 Equiv.
Heat Treatment: Induction Hardened
Surface Treatment: No
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SFJC12-120-M6-SC15
Type | Material | Hardness | Surface Treatment | ||||
With Wrench Flats | With Cross-Drilled Hole | ||||||
D Tol. g6 | D Tol. h5 | D Tol. f8 | D Tol. g6 | D Tol. f8 | |||
SFJC | SFUC | - | SFHC | - | EN 1.3505 Equiv. | Effective Hardened Depth of Induction Hardening >>P.112 EN 1.3505 Equiv. 58HRC~ EN 1.4037 Equiv. 56HRC~ | - |
SSFJC | SSFUC | - | SSFHC | - | EN 1.4037 Equiv. | ||
PSFJC | PSFUC | - | PSFHC | - | EN 1.3505 Equiv. | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More | |
PSSFJC | PSSFUC | - | PSSFHC | - | EN 1.4037 Equiv. | ||
RSFJC | - | - | RSFHC | - | EN 1.3505 Equiv. | LTBC Plating | |
- | - | PSFGC | - | PSGHC | EN 1.1191 Equiv. | - | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More |
- | - | PSSFGC | - | - | EN 1.4301 Equiv. |
Part Number | - | L | - | M | - | SC | - | H |
SFJC10 | - | 200 | - | M5 | - | SC6 | ||
SFHC20 | - | 425 | - | M8 | - | H20 | ||
Part Number | L specified in 1mm Increment | M (Coarse) Selection | Wrench Flats Dimensions | D Tol. | C | ||||||||||||||||
Type | D | SC | W | ℓ1 | g6 | h5 | f8 | ||||||||||||||
(With Wrench Flats) (D Tolerance g6) SFJC SSFJC PSFJC PSSFJC (D Tolerance f8) PSFGC PSSFGC | (D Tolerance h5) SFUC SSFUC PSFUC PSSFUC | 6 | 20~600 | 3 | SC=1mm Increment SC+ℓ1≤L SC≥0 Details of Wrench Flats P.112 | 5 | 8 | -0.004 -0.012 | 0 -0.005 | -0.010 -0.028 | 0.5 or Less | ||||||||||
8 | 20~800 | 3 | 4 | 5 | 7 | 8 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 0.5 or Less | |||||||||||
10 | 20~800 | 3 | 4 | 5 | 6 | 8 | 8 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 0.5 or Less | ||||||||||
12 | 20~1000 | 4 | 5 | 6 | 8 | 10 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | ||||||||||
13 | 25~1000 | 4 | 5 | 6 | 8 | 11 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | ||||||||||
15 | 25~1000 | 4 | 5 | 6 | 8 | 10 | 13 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | |||||||||
16 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 14 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | |||||||||
18 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | ||||||||
20 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 17 | 10 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1.0 or Less | ||||||||
25 | 35~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 22 | 10 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1.0 or Less | |||||||
30 | 35~1500 | 6 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1.0 or Less | ||||||||
35 | 35~1500 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 15 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1.0 or Less | ||||||||
40 | 50~1500 | 10 | 12 | 16 | 20 | 24 | 30 | 36 | 20 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1.0 or Less | ||||||||
50 | 65~1500 | 12 | 16 | 20 | 24 | 30 | 41 | 20 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1.0 or Less |
Part Number | L specified in 1mm Increment | M (Coarse) Selection | Wrench Flats Dimensions | D Tol. | C | |||||||||||
Type | D | SC | W | ℓ1 | g6 | |||||||||||
(With Wrench Flats) (D Tolerance g6) LTBC Plating RSFJC | 6 | 20~500 | 3 | SC=1mm Increment SC+ℓ1≤L SC≥0 Details of Wrench Flats P.112 | 5 | 8 | -0.004 -0.012 | 0.5 or Less | ||||||||
8 | 20~500 | 3 | 4 | 5 | 7 | 8 | -0.005 -0.014 | 0.5 or Less | ||||||||
10 | 20~500 | 3 | 4 | 5 | 6 | 8 | 8 | -0.005 -0.014 | 0.5 or Less | |||||||
12 | 20~500 | 4 | 5 | 6 | 8 | 10 | 10 | -0.006 -0.017 | 0.5 or Less | |||||||
13 | 25~500 | 4 | 5 | 6 | 8 | 11 | 10 | -0.006 -0.017 | 0.5 or Less | |||||||
15 | 25~500 | 4 | 5 | 6 | 8 | 10 | 13 | 10 | -0.006 -0.017 | 0.5 or Less | ||||||
16 | 30~500 | 4 | 5 | 6 | 8 | 10 | 14 | 10 | -0.006 -0.017 | 0.5 or Less | ||||||
18 | 30~500 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 10 | -0.006 -0.017 | 0.5 or Less | |||||
20 | 30~500 | 4 | 5 | 6 | 8 | 10 | 12 | 17 | 10 | -0.007 -0.020 | 1.0 or Less | |||||
25 | 35~500 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 22 | 10 | -0.007 -0.020 | 1.0 or Less | ||||
30 | 35~500 | 6 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | -0.007 -0.020 | 1.0 or Less |
Part Number | L specified in 1mm Increment | M (Coarse) Selection | Cross-Drilled Hole Dimensions | D Tol. | C | |||||||||||
Type | D | H | d | g6 | f8 | |||||||||||
(With Cross-Drilled Hole) (D Tolerance g6) SFHC SSFHC PSFHC PSSFHC RSFHC (D Tolerance f8) PSGHC | 8 | 20~800 | 3 | 4 | 5 | H=1mm Increment L≥H+d/2+2 H≥Mx2.5+d/2+6 | 3 | -0.005 -0.014 | -0.013 -0.035 | 0.5 or Less | ||||||
10 | 20~800 | 3 | 4 | 5 | 6 | 3 | -0.005 -0.014 | -0.013 -0.035 | 0.5 or Less | |||||||
12 | 20~1000 | 4 | 5 | 6 | 8 | 3 | -0.006 -0.017 | -0.016 -0.043 | 0.5 or Less | |||||||
13 | 25~1000 | 4 | 5 | 6 | 8 | 4 | -0.006 -0.017 | -0.016 -0.043 | 0.5 or Less | |||||||
15 | 25~1000 | 4 | 5 | 6 | 8 | 10 | 4 | -0.006 -0.017 | -0.016 -0.043 | 0.5 or Less | ||||||
16 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 4 | -0.006 -0.017 | -0.016 -0.043 | 0.5 or Less | ||||||
18 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 6 | -0.006 -0.017 | -0.016 -0.043 | 0.5 or Less | |||||
20 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 6 | -0.007 -0.020 | -0.020 -0.053 | 1.0 or Less | |||||
25 | 35~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 7 | -0.007 -0.020 | -0.020 -0.053 | 1.0 or Less | ||||
30 | 35~1500 | 6 | 8 | 10 | 12 | 16 | 20 | 7 | -0.007 -0.020 | -0.020 -0.053 | 1.0 or Less |
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
SFJC12-120-M6-SC15 |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Shaft Dia. D (mm) | Length L (mm) | Material | Heat Treatment | Surface Treatment | Shaft Fits Tolerance | Hardness | Add Wrench Flats at One Location [SC] (mm) | Change Tapped Thread M to Fine One [MSC] (mm) | Change the effective length of tapped part to Mx3 (mm) | H (mm) | Tapped (Coarse (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 4 Days | 10 | 12 | 120 | [Iron] EN 1.3505 Equiv. | Induction Hardened | No | g6 | Induction Hardening (58HRC~) | 15 | - | - | - | 6 |
Loading...
Basic Shape | Straight | Shaft end shape (left) | Tapped | Shaft end shape (right) | Straight |
---|---|---|---|---|---|
Shaft end perpendicularity | Perpendicularity (0.2) |
Configure
Basic Attributes
Shaft Dia. D(mm)
Material
Heat Treatment
Surface Treatment
Shaft Fits Tolerance
Hardness
Change Tapped Thread M to Fine One [MSC](mm)
Change the effective length of tapped part to Mx3(mm)
H(mm)
Type
Length L(mm)
Add Wrench Flats at One Location [SC](mm)
Tapped (Coarse(mm)
Filter by CAD data type
Filter by standard shipping days
Optional Attributes