Manufacturer part number: PSSFGM8-50-F5-B3-P6-T5-S3-Q6
Brand: MISUMI
Price: Please contact the support for quotation
Delivery time: 4 Days
Shaft Dia. D: 8 mm
Length L: 50 mm
Material: [Stainless Steel] EN 1.4301 Equiv.
Heat Treatment: No
Surface Treatment: Hard Chrome Plating
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
PSSFGM8-50-F5-B3-P6-T5-S3-Q6
Type | Material | Hardness | Surface Treatment | ||
D Tol. g6 | D Tol. h5 | D Tol. f8 | |||
SFAM | SFUM | - | EN 1.3505 Equiv. | Effective Hardened Depth of Induction Hardaening >>P.112 EN 1.3505 Equiv. 56HRC~ EN 1.4037 Equiv. 56HRC~ | - |
SSFAM | SSFUM | - | EN 1.4037 Equiv. | ||
PSFAM | PSFUM | - | EN 1.3505 Equiv. | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More | |
PSSFAM | PSSFUM | - | EN 1.4037 Equiv. | ||
RSFAM | - | - | EN 1.3505 Equiv. | LTBC Plating | |
- | - | PSFGM | EN 1.1191 Equiv. | - | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More |
- | - | PSSFGM | EN 1.4301 Equiv. |
Part Number | - | L | - | F | - | B | - | P | - | T | - | S | - | Q |
SFAM20 | - | 300 | - | F30 | - | B20 | - | P8 | - | T20 | - | S15 | - | Q10 |
Part Number | 1mm Increment | P,Q Selection | D Tol. | (Y)Max. | R | C | ||||||||||||||||
Type | D | L | F, T | B, S | g6 | h5 | f8 | |||||||||||||||
(D Tol. g6) SFAM SSFAM PSFAM PSSFAM (D Tol. f8) PSFGM (D≥6) PSSFGM (D≥6) | (D Tol. h5) SFUM SSFUM PSFUM PSSFUM | 4 | 25~296 | 2≤F≤Px5 2≤T≤Qx5 | (When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (When Q≤6) S≤T-2 (When Q=8, 10) S≤T-3 (When Q≥12) S≤T-5 (W/o Threads) B=0 S=0 B, S≥Pitchx3 | 3 | -0.004 -0.012 | 0 -0.005 | - | 300 | 0.2 or Less | 0.2 or Less | ||||||||||
5 | 25~396 | 3 | 4 | -0.004 -0.012 | 0 -0.005 | - | 400 | 0.2 or Less | 0.2 or Less | |||||||||||||
6 | 25~596 | 3 | 4 | 5 | -0.004 -0.012 | 0 -0.005 | -0.010 -0.028 | 600 | 0.3 or Less | 0.5 or Less | ||||||||||||
8 | 25~796 | 3 | 4 | 5 | 6 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 800 | 0.3 or Less | 0.5 or Less | |||||||||||
10 | 25~796 | 4 | 5 | 6 | 8 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 800 | 0.3 or Less | 0.5 or Less | |||||||||||
12 | 25~996 | 5 | 6 | 8 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1000 | 0.3 or Less | 0.5 or Less | |||||||||||
13 | 25~996 | 5 | 6 | 8 | 10 | 12 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1000 | 0.3 or Less | 0.5 or Less | ||||||||||
15 | 25~996 | 5 | 6 | 8 | 10 | 12 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1000 | 0.3 or Less | 0.5 or Less | ||||||||||
16 | 25~1196 | 5 | 6 | 8 | 10 | 12 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1200 | 0.3 or Less | 0.5 or Less | ||||||||||
18 | 25~1196 | 5 | 6 | 8 | 10 | 12 | 16 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 1200 | 0.3 or Less | 0.5 or Less | |||||||||
20 | 25~1196 | 6 | 8 | 10 | 12 | 16 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1200 | 0.3 or Less | 1.0 or Less | ||||||||||
25 | 25~1196 | 8 | 10 | 12 | 16 | 20 | 24 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1200 | 0.3 or Less | 1.0 or Less | |||||||||
30 | 25~1496 | 8 | 10 | 12 | 16 | 20 | 24 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1500 | 0.3 or Less | 1.0 or Less | |||||||||
35 | 25~1496 | 10 | 12 | 16 | 20 | 24 | 30 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1500 | 0.5 or Less | 1.0 or Less | |||||||||
40 | 25~1496 | 12 | 16 | 20 | 24 | 30 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1500 | 0.5 or Less | 1.0 or Less | ||||||||||
50 | 25~1496 | 16 | 20 | 24 | 30 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1500 | 0.5 or Less | 1.0 or Less |
Part Number | 1mm Increment | P,Q Selection | D Tol. | (Y)Max. | R | C | ||||||||||||
Type | D | L | F, T | B, S | g6 | |||||||||||||
(D Tol. g6) LTBC Plating RSFAM (Ymax≤800) | 4 | 25~296 | 2≤F≤Px5 2≤T≤Qx5 | (When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (When Q≤6) S≤T-2 (When Q=8, 10) S≤T-3 (When Q≥12) S≤T-5 (W/o Threads) B=0 S=0 B, S≥Pitchx3 | 3 | -0.004 -0.012 | 300 | 0.2 or Less | 0.2 or Less | |||||||||
5 | 25~396 | 3 | 4 | -0.004 -0.012 | 400 | 0.2 or Less | 0.2 or Less | |||||||||||
6 | 25~500 | 3 | 4 | 5 | -0.004 -0.012 | 600 | 0.3 or Less | 0.5 or Less | ||||||||||
8 | 25~500 | 3 | 4 | 5 | 6 | -0.005 -0.014 | 800 | 0.3 or Less | 0.5 or Less | |||||||||
10 | 25~500 | 4 | 5 | 6 | 8 | -0.005 -0.014 | 800 | 0.3 or Less | 0.5 or Less | |||||||||
12 | 25~500 | 5 | 6 | 8 | 10 | -0.006 -0.017 | 1000 | 0.3 or Less | 0.5 or Less | |||||||||
13 | 25~500 | 5 | 6 | 8 | 10 | 12 | -0.006 -0.017 | 1000 | 0.3 or Less | 0.5 or Less | ||||||||
15 | 25~500 | 5 | 6 | 8 | 10 | 12 | -0.006 -0.017 | 1000 | 0.3 or Less | 0.5 or Less | ||||||||
16 | 25~500 | 5 | 6 | 8 | 10 | 12 | -0.006 -0.017 | 1200 | 0.3 or Less | 0.5 or Less | ||||||||
18 | 25~500 | 5 | 6 | 8 | 10 | 12 | 16 | -0.006 -0.017 | 1200 | 0.3 or Less | 0.5 or Less | |||||||
20 | 25~500 | 6 | 8 | 10 | 12 | 16 | -0.007 -0.020 | 1200 | 0.3 or Less | 1.0 or Less | ||||||||
25 | 25~500 | 8 | 10 | 12 | 16 | 20 | 24 | -0.007 -0.020 | 1200 | 0.3 or Less | 1.0 or Less | |||||||
30 | 25~500 | 8 | 10 | 12 | 16 | 20 | 24 | -0.007 -0.020 | 1500 | 0.3 or Less | 1.0 or Less |
Coarse Thread Dimension | |
M, N | Pitch |
3 | 0.5 |
4 | 0.7 |
5 | 0.8 |
6 | 1.0 |
8 | 1.25 |
10 | 1.5 |
12 | 1.75 |
16 | 2.0 |
20 | 2.5 |
24 | 3.0 |
30 | 3.5 |
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
PSSFGM8-50-F5-B3-P6-T5-S3-Q6 |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Shaft Dia. D (mm) | Length L (mm) | Material | Heat Treatment | Surface Treatment | Shaft Fits Tolerance | Hardness | B (mm) | F (mm) | Fine Thread [PMC] (mm) | Fine Thread [PMS] (mm) | Fine Thread [QMC] (mm) | Fine Thread [QMS] (mm) | P (mm) | Q (mm) | S (mm) | T (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 4 Days | 10 | 8 | 50 | [Stainless Steel] EN 1.4301 Equiv. | No | Hard Chrome Plating | f8 | No Induction Hardening | 3 | 5 | - | - | - | - | 6 | 6 | 3 | 5 |
Loading...
Basic Shape | Straight | Shaft end shape (left) | Threads | Shaft end shape (right) | Threads |
---|---|---|---|---|---|
Shaft end perpendicularity | Perpendicularity (0.2) |
Configure
Basic Attributes
Shaft Dia. D(mm)
Material
Heat Treatment
Surface Treatment
Shaft Fits Tolerance
Hardness
Fine Thread [PMC](mm)
Fine Thread [PMS](mm)
Fine Thread [QMC](mm)
Fine Thread [QMS](mm)
Type
Length L(mm)
B(mm)
F(mm)
P(mm)
Q(mm)
S(mm)
T(mm)
Filter by CAD data type
Filter by standard shipping days
Optional Attributes