Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Type | Material | Finish |
ALB /ALBFB | 1.0038 equiv. | Black Oxide |
ALB/ SALBFB | 1.4301 equiv. | - |
Note: See Spec Table Below For Detail
Tolerance
Dimension | Tol. | Finish | Geometric | ||
0.0 | ±0.3 | 6.0μm | Surfaces |
0.015 T.I.R | |
0.00 | ±0.03 | 3.0μm | |||
0.000 | ±0.015 | 1.6μm |
Part Number | ||
Type | Specification | |
ALB | 080M | |
ALB | 081 | |
ALB | 512M |
Part Number | ||||||||||||||||
Type | Width | Thickness | A Length | B Length | Hole (M) | Dowel(D) | Hole (MA/NA) | Dowel(DA) | ||||||||
ALBFB | 15 | - | T10 | - | A90 | - | B65 | - | M8 | - | D8 | - | NA11 | - | DA6 | |
SALBFB | 20 | - | T19 | - | A110 | - | B110 | - | M10 | - | D6 | - | MA10 | - | DA8 |
Standard NAAMS (25mm Series L Blocks with Metric Holes)
Type | Hole Selection (A) / Material | Hole Selection (2) | Hole Selection (1) | W | A | B | T | A1 | B1 | ||||||
MA10 | NA11 | DA Dowel Hole (2) | M Tapped Hole (1) |
D Dowel Hole (1) | |||||||||||
1.0038 equiv. | 1.4301 equiv. | 1.0038 equiv. | 1.4301 equiv. | Tolerance | Tolerance | ||||||||||
ALB | 080M | 081M | 070M | 071M | 8 H6 | +0/+0.009 | M10 | 8 H6 | +0/+0.009 | 25 | 85 | 65 | 20 | 10 | 5 |
MA10 (M10x1.5 tapped Hole), NA11 (Ø11 Through Hole)
Standard NAAMS (25mm Series L Blocks with Inch Holes)
Type | Hole Selection (A) / Material | Hole Selection (2) | Hole Selection (1) | W | A | B | T | A1 | B1 | ||||||
MA3/8 | NA13/32 | DA Dowel Hole (2) | M Tapped Hole (1) |
D Dowel Hole (1) | |||||||||||
1.0038 equiv. | 1.4301 equiv. | 1.0038 equiv. | 1.4301 equiv. | Tolerance | Tolerance | ||||||||||
ALB | 080 | 081 | 070 | 071 | 5/16 | +0/-0.0005 | 3/8-16 | 5/16 | +0/-0.0005 | 25 | 85 | 65 | 20 | 10 | 5 |
MA3/8 (3/8-16 tapped Hole), NA13/32 (Ø13/32 Through Hole)
Standard NAAMS (20mm Series L Blocks with Metric Holes)
Type | Hole Selection (A) / Material | Hole Selection (2) | Hole Selection (1) | W | A | B | T | A1 | B1 | ||||||
MA8 | NA9 | DA Dowel Hole (2) | M Tapped Hole (1) |
D Dowel Hole (1) | |||||||||||
1.0038 equiv. | 1.4301 equiv. | 1.0038 equiv. | 1.4301 equiv. | Tolerance | Tolerance | ||||||||||
ALB | 380M | 381M | 370M | 371M | 6 H6 | +0/+0.008 | M8 | 6 H6 | +0/+0.008 | 20 | 85 | 65 | 20 | 10 | 5 |
510M | 511M | 512M | 513M | 8 H6 | +0/+0.009 | M8 | 8 F7 | +0.013 /+0.028 | 20 | 85 | 65 | 20 | 10 | 5 |
M8 (M8x1.25 tapped Hole), NA9 (Ø9.0 Through Hole)
Configurable NAAMS (L Blocks)
Type | W Width | T Thickness (1mm inc.) |
A Length (5mm inc.) |
B Length (5mm inc.) |
Hole Selection (1) | Hole Selection (A)/(2) | A1 | B1 | ||||
Hole Selection (1) | Dowel Hole (1) | Hole Selection (A) | Dowel Hole (2) | |||||||||
Tolerance | Tolerance | |||||||||||
ALBFB SALBFB |
20 25 |
14 ~ 20 (B1=5) 10 ~ 20 (B1≥20) |
80 - 120 | 65 - 120 B1=5 or B1≥20 |
M8 M10 |
D6 F7 D8 F7 |
+0.010/+0.022 +0.013/+0.028 |
NA9 NA11 MA8 MA10 |
DA6 H6 DA8 H6 |
+0/0.008 +0/0.009 |
A-55-T | B-40-T B1=5 or B1≥20 |
Condition: B1=5 or B1≥20
N- through Hole, M- Tapped Hole (Coars Thread), D- Dowel Hole
N9/NA9 for M8 Screw, N11/NA11 for M10 Screw
MA8/M8 (M8x1.25 tapped Hole), MA10/M10 (M10x1.5 Tapped Hole)
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
ALBFB20-T[10-20/1]-A[80-120/1]-B65-M[8,10]-D[6,8]-MA[8,10]-DA[6,8] |
ALBFB20-T[10-20/1]-A[80-120/1]-B65-M[8,10]-D[6,8]-NA[9,11]-DA[6,8] |
ALBFB20-T[10-20/1]-A[80-120/1]-B[80-120/1]-M[8,10]-D[6,8]-MA[8,10]-DA[6,8] |
ALBFB20-T[10-20/1]-A[80-120/1]-B[80-120/1]-M[8,10]-D[6,8]-NA[9,11]-DA[6,8] |
ALBFB25-T[10-20/1]-A[80-120/5]-B[65-120/5]-M[8,10]-D[6,8]-MA[8,10]-DA[6,8] |
ALBFB25-T[10-20/1]-A[80-120/5]-B[65-120/5]-M[8,10]-D[6,8]-NA[9,11]-DA[6,8] |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | (W)Width | #2 (T) Thickness (mm) | #3 (A) Height (mm) | #4 (B) Length (mm) | #5 (M) Tapped Hole (1) | #6 (D) Dowel Hole (1) (mm) | #7 (MA) Tapped Hole (2) | #7 (NA) Through Hole (2) (mm) | #8 (DA) Dowel Hole (2) (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 39 Days | 20 | 10 ~ 20 | 80 ~ 120 | - | 8 ~ 10 | 6 ~ 8 | 8 ~ 10 | - | 6 ~ 8 | ||
- | 1 | 39 Days | 20 | 10 ~ 20 | 80 ~ 120 | - | 8 ~ 10 | 6 ~ 8 | - | 9 ~ 11 | 6 ~ 8 | ||
- | 1 | 39 Days | 20 | 10 ~ 20 | 80 ~ 120 | 80 ~ 120 | 8 ~ 10 | 6 ~ 8 | 8 ~ 10 | - | 6 ~ 8 | ||
- | 1 | 39 Days | 20 | 10 ~ 20 | 80 ~ 120 | 80 ~ 120 | 8 ~ 10 | 6 ~ 8 | - | 9 ~ 11 | 6 ~ 8 | ||
- | 1 | 39 Days | 25 | 10 ~ 20 | 80 ~ 120 | 65 ~ 120 | 8 ~ 10 | 6 ~ 8 | 8 ~ 10 | - | 6 ~ 8 | ||
- | 1 | 39 Days | 25 | 10 ~ 20 | 80 ~ 120 | 65 ~ 120 | 8 ~ 10 | 6 ~ 8 | - | 9 ~ 11 | 6 ~ 8 |
Loading...
Standard or Configurable | Configurable | Number of Holes | 4 Holes | Shape | Standard |
---|---|---|---|---|---|
Number of Holes | 4x4 | Shape of Block | Configureable | Material | 1.0038 equiv. |
Inch/Metric Hole | Metric |
Configure
Basic Attributes
(W)Width
#2 (T) Thickness(mm)
#3 (A) Height(mm)
#4 (B) Length(mm)
#5 (M) Tapped Hole (1)
#6 (D) Dowel Hole (1)(mm)
#7 (MA) Tapped Hole (2)
#7 (NA) Through Hole (2)(mm)
#8 (DA) Dowel Hole (2)(mm)
Type
Filter by CAD data type
Filter by standard shipping days
Optional Attributes